BTFP72156 Smart Point 15GA FN Style Angle Finish Nailer Kit

Had a 20+ year old Bostitch finish nailer that started jamming. Tried to fix.... gave up and bought this new model.... WOW... had 100+ ft of tongue and groove on a ceiling to replace. The much smaller tip on this new nailer makes nail placement a breeze. Not one misfire, not one jam. Nail depth consistency spot on. Surprisingly light. Well worth the purchase. My only concern, my old Bostitch had a big rubber boot on the tip. Which when nailing pine trim didn't ding the wood. (made precise nail placement very difficult) I'm wondering if the newer much smaller tip will ding the soft pine trim. I'll need to run a test. May require a softer touch when nailing pine trim. What a tool....... it could have been priced $100 more and it still would have been worth it....

I will say that I have only had the nail gun about a month at this point but it has run flawlessly so far. First thing I did out of the box was run a full magazine of 2 1/2 nails through it into a stack of 2x4, it ran perfectly without a single hiccup. I then used it for putting up door trim in my house and again had no problems. I would definitely recommend this nail gun to anyone wanting to do DIY around their house or farm. I will update later after I get more time and projects put through this gun.

I inherited about hundred pounds of FN nails and this was the only nailer that I could find that would be able to utilize them. Probably would have gotten a cheaper DA nailer if I didn't already have several hundred dollars worth of FN nails. Its a solid nailer, I haven't found anything that I could complain about except that it uses proprietary nail type and the price is a tad high.

7 years in review.... Still no complaints - still not going through a thousand nails a week but I am on my 3rd bathroom remodel. All down to the studs, all involve stud removal and repair. Again, not a pro and working solo. This tool allows me to work solo more easily, even if I go back over some of the work with convention nails. Still no jams, or any other issues I am no a "pro" but I am a fairly experienced do it yourselfer. I have used the nailer on 3\4 red oak flooring, 2 inch nails right through the face, no problem. Poplar base board and door molding, no problem. Light, easy to use and easy to adjust. When shopping for this, I saw the flip out stud guide and thought "goofy" - wrong! It is ridiculously convenient when installing baseboard (again, not a "pro"). Further into "not a pro" territory, a couple of reviewers are giving low marks due to the nails. One because they cannot be bought locally and that would be a deal killer if I was going to run through a couple of thousand a week, but I'm not. The other guy thought the nails were of poor design or finish. That one is more troubling, but I have not had a jam or a problem with a nail not holding, yet...

This is my fifth Bostitch product and by far my favorite. My first brad nailer and finish nailer have seen their better day and have now been replaced. This finish nailer has a great design, does what I ask it to do, and at a reasonable price. A perfect replacement to my 25 year old aging and dead Bostitch finish nailer.

Built a new home and I used this for all of my finish work. Works excellent!

I just unboxed it two days ago & only shot a dozen or so nails just to get the feel of the gun. All the features work as advertised, and it was simple to adjust the nail depth. The only minor complaint I have is that the gun was advertised to come with 3 no-mar tips, and it only had two. Other than that, this is an outstanding nail gun.

I have 4 other Bostitch nailers. Unfortunately they continually need work to continue using them. I bought this one because it was on sale and I didn’t have anyone to recommend a better brand. It uses the same FN nail as the original one and Bostitch has decided to discontinue making the o-ring kit and bumper that I need to fix it. It was nice and not plastic like this one. I had problems with a stapler and the repair shop took some o-rings and stretched them to get it working. I bought an o-ring kit and it is still working. The triggers on the Bostitch won’t handle 100 psi and they blow out, needing replacement that I have become good at. I gave this one a “1” since the gun comes in a case. I am hoping that since it is a Bostitch that it will work right out of the box without problems.

Great tool. Price is perfect. Quality product

Exelente compra

I have too many brad nailers...this is my first "finish" nailer. I had a lot of mdf baseboar to install, and my brad nailers couldn't put one nail through it. This nailer was perfect for the job. It jammed once (100's of nails into the job) but it has a feature that opens up the nose of the nailer, and makes that an easy fix. I should have bought this a long time ago.

This thing works like a Champ. Love it. Made putting up sheets of plywood so easy. No jams really. When it does, it's easy to clear up. 15awg nails are so strong and hold up well. The 16inch spacer works nice.

Great tool, very powerful and i love that you can shoot it from any angle without having to compress that silly safety that the old guns had