SE Prospector's Choice Pre-Scored Trimmable Sluice Box Matting with 3 Different Riffle Types for Gold Prospecting, 10" x 27"

This sluice mat is heavy enough to be easily clamped down into my sluice without it flapping up when in use. The different patterns of ridges are even and of good quality. The sluice mat overall is made of good quality rubber material.

I build most of my own equipment, it's the best way to figure out what is (or is not) important to how something works. I wanted to build a lightweight sluice to be able to carry with me when I hike, so I solvent welded together some pvc boards and bought this mat. It's held in place by part of a carpet bar and a bolt with wingnut. I did a couple of trials to get my setup dialed in, stopped to wash the mat with soap, and then adjusted the amount of slick plate it had in front of it. I placed it in series (at the front) with the tailings flowing into a plastic drop riffle sluice, and from there into my bazooka gold trap. I then proceeded to feed 10 5-gallon buckets of 1/2" screened dirt with an average of ~7 specks/small flakes per pan through the sluice. Here's what I learned: 1. It works (well) with a wide variety of water flows and angles. 2. It's fairly quick to process material (doesn't have to be fed that slowly 3. I could excluded the largest rocks while digging and skipped classifying, if I hadn't built the box with a crossbar... ...the mat won't really hold anything much larger than the size of the hungarian riffles. 4. It's tolerant of many shapes of gold (coarse and oddly shaped pieces, flat flakes, foil like bits, and powder down to below 75 mesh... ...I don't have a finer screen, so I don't know how small). 5. I lost around 3% of the gold that I fed through the sluice, with fairly heavy water flow and feeding it kinda fast. Almost everything I lost stopped in the first riffle of the drop riffle sluice... ...which led me to routing a couple of drop riffles in the pvc sluice box bottom. I did collect some ultra fine gold in my fluid bed sluice, but nothing of size made it that far. 6. It can be difficult to clean the mat, and generally it has to be removed from the sluice and rolled backwards in a pan or bucket to get everything out of it. 7. The pre-scoring on the back of the mat makes me a little bit nervous when I have to manipulate the mat for cleaning... ...it seems solid enough, but it's a little surprising every time I see it. 8. A small brush is good to help get the bubbles out of the finer parts of the mat when you set it up. 9. It needs to be washed, with soap, when you first get it. It was easier to handle and worked better after I washed it. 10. The color does show gold pretty well, when I'm lucky enough to get something big enough to see... ...or enough fines to fill the first riffles. After some tinkering, I determined that it's much smoother (and more gold stops in the first section) if it has at least 6" of slick plate. I've been using this in a sluice now for a week long vacation (took 4 sluices, wound up liking this one the best for my area and available flow), and I've netted almost 3 grams of fines with it. I like it! I'll update this at a later date if I have anything to add.

I bought this to try it out. It worked but I ended up buying gold hog matts

Works great and you don’t have a bunch of stuff to pan out it cuts out a lot of stuff that you end up having to get rid of with the miners moss stuff that used to be in the sluice box

It came folded and warped. Still trying to get it to straighten out, but doubtful so far. It does catch gold, seen it. Just those awful warped riffles. Is this normal? or should I order a replacement? It does work, but could work better if not so warped. My first guess was that is was warped by high heat from the mold, then folded and packaged before it cooled off. Not rolled into a tight roll for shipping. Other than that, It still works, and I love that it does catch gold.

Using in my mini 6" highbanker with a 2,000 gph 12 volt pump. This Matt works fenaminal at catching the even finest gold my loss out the end doing about a 95% capture rate.

After trying , with some success , other matting , this mat has the configuration that I was looking for. Planning to update review after trying it out. I am expecting good results .

The mat I received wasn't cut very well. The main edge (not the side with the pre-scored line) isn't straight and is a bit warped leaving a gap between the mat and my sluice box. It doesn't seem to lay flat so I am a bit concerned with how it will perform although the variety of riffles look promising. In addition, the color of the mat is a bit darker than what's shown in the photos - not a huge deal. A bit disappointed but we'll see how it does. **I'm using this mat in place of the carpet, expanded metal and metal riffles, in my Royal Mini Highbanker.

Thanks

My husband is happy mention it's a good product and it's going to do the trick

I expect a higher quality dude

Parfait! Exactement ce que je cherchais!

Produit défectueux, gros trou dans le centre du produit! J ai contacté le vendeur et dit que tout est ok! Je ne le recommande à personne! Très mauvais service à la clientèle!