Brad Nailer and Air Stapler, 2-in-1, 2” (Campbell Hausfeld SB504099AV)

When I opened the box, I noticed the slide seem loose. I took it out to test with both staples and brads. Never tried the staples because it severely jammed with the first brad shot. I was not able to clear the brad from the gun I immediately returned the gun.

I couldn't have finished my moulding and trim without it. I needed an air nailer, but budget was getting tight to buy a $150+ model. Found this on Amazon for $32 and it works great. The only reason I gave 4 stars is that it does misfire some. All of them do, but this one maybe more than an expensive model. Still, didn't happen too often. The depth adjustment also doesn't do much. If you were nailing in really soft wood or mdf, it might not work well because even at the lowest setting, it sunk the nails and staples about the same as the deeper setting. That doesn't seem to work.

Never used a tool like this before. Skimmed the manual, set the pressure on my air tank accordingly, loaded in the brads and started pumping nails into a test piece of wood. Took some experimenting to get the gauges set correctly and after that it worked fine. It does occasionally misfire (no nail comes out), i don't know if that is something i'm doing or its doing. If i am very focused on what i'm doing seems to work fine... after several nails once I get into a rhythm not as focused as much and that is when it seems to miss a nail (could even be I've let the pressure drop to low). Still as a rank amateur it works for me.

Placed some door trim with ease. Will be placing some other mouldings soon.Very easy to use came with the nails needed.Might not be high dollar to use every day.But it got my job done and was cheap enough to not have to get a very expensive unit just for a few boards. So far so good and worked great with a tiny little compressor and only 60psi filled 1 time.

This is actually a nice stapler, worked very well when i was doing some trim pieces in my house. I would recommend as it is a very cheap alternative however if doing a woodworking project using nice quality finished wood know that when shooting brads this will leave a indent in your wood like it shot a staple. Personally that was the only thing i dislike about the tool. You can go over with putty and cover it and you be fine but there are other stapler that doesn't do that.

I held off of reviewing until I ran a lot of staples and nails through it. I was initially concerned about the number of people who experienced jambs. I'm pleased to say that I've shot over 1000 staples and over 200 brads without a single jamb up. Don't let the price fool you, in my opinion it's an excellent product regardless of the low price.

I'm using the right size brad nails. Is there a brand I should be using? I like the gun alot. This is my 4th one in 6 months. This last time I was mad ,that I have to pay for the shipping. $27.00 to ship it back to Florida, For a 78.00 refund Or exchange. This sucks. Thank you

I purchased this nailer for a specific small project. I choose this inexpensive unit thinking I'd seldom have a use for it. I've found it very handy to tack material in position before fastening with a framing nailer in two situations. It's very light and is easy to handle while holding a heavy piece of material with the other hand. Material doesn't move as the brad penetrates as often happens with framing nails following the grain or hitting a knot. Once tacked in position, the brads prevent the framing nails from moving the material. Every now and then I actually use it for it's intended purpose of fastening trim.I'm very satisfied with the quality and performance of the tool. I've had one jam which was easily cleared with the quick release clamp (hit a knot I think). It's easy to adjust depth and quick and easy to add brads or change sizes.A great tool!

I purchased this item based on the reputation off Campbell Hausfield tools .... and was not disappointed. Works as expected and rugged enough to provide years of continuous and reliable service. Highly recommended.

Va très bien

This item jams regularly and an allen wrench is required to unjam it. You must completely run your nails through before adding another row or it will jam. Otherwise, it works fine... I have not tried it with staples yet.

Very disappointed with this product. I used on three separate occasions. In total, I had to fill the magazine with brad nails no more than five times, that's how little I used it. I also used it no more than one hour per use. The last time was last week and something jammed on the last brad nail. I took it to a local mechanical shop to have it looked at and they said that it can't be fixed.So I thought, well, no biggie, Amazon is good with returns, right? I just saw that the return window expired in November of 2020. I bought it in Sept 2020 but never used it until early 2021.I'm still trying to figure out if and how I can return it.To be honest: If they offer a replacement, I would decline as I had a similar brad nailer by the same company and it was broken when I opened the box!

Works well. A little hard to align nailer with spot to nail. Otherwise I am happy with the product.