C2G Wiremold Floor Cord Management Kit, Corduct, Cord Protector, Wire Organizer and Hider, Rubber Cable Cover and Concealer, Gray, 5 Feet, CDG-5

Well made. Works well on carpet. Good value.

I live in a small apartment with no washer or dryer so I keep 2 small Haier units plugged into my kitchen, with the wires running across my hallway. For a long time, we just covered the wires with a rug, but now that we have cats who love to tangle themselves up in rugs and sometimes pee on then, it was time to make an upgrade. The cord protector did arrive rolled up tight and hard to flatten, but we just rolled it in the opposite direction and put some weight on it for a few minutes, and it flattened out just fine. If it had stuck, I'd have just doused it in hot water or used a hair dryer to relax the rubber. We trimmed ours into 2 pieces and managed to fit 2 cords into each part, which totally solved our wire problem. We didn't use any adhesive because we need to be able to sweep under that area, but haven't had any issues with it moving or sliding. Overall, solid product! Wish it was a little cheaper, but whatever.

Thanks for clarifying — since this Legrand Wiremold is designed as a floor cord cover (not just a wall channel), here’s a revised take: --- Keeps cords safe underfoot, but a bit lightweight I picked up this Legrand Wiremold floor cord cover to deal with some cords running across a walkway. At 5 feet, it’s a useful length for most small setups, and the ivory color doesn’t stand out too much on light flooring. It definitely makes things look tidier and reduces the tripping hazard. The low profile helps it blend in, and the channel is just wide enough for a couple of standard power cords or several thinner cables. Cutting it to size is pretty easy with a utility knife, and once laid flat, it stays in place decently on hard surfaces. Where it falls short is durability and weight. The plastic is thinner than I expected, and it has a tendency to shift around if people walk on it frequently, especially on smooth floors like tile or wood. I found that taping down the ends helped. It also doesn’t handle bulky plugs very well—you really want to run just the cord itself through. Bottom line: A practical, inexpensive solution to cover and protect cords across the floor, but you’ll likely need to secure it better if it’s in a high-traffic area.

This is a low cord cover. I was trying to get one that is as flat as possible. It only holds one thick cord or maybe 1-3 small standard cords. I had to almost bend it in half backwards to get it to open to put the cord in but it worked and is giving me the results we hoped for. I have not used the adhesive as I am using this on carpet. I did have to lay this out in the sun by a window and have heavy things on each end to straighten it out but I expected that based on other reviews. I bought two and had to cut one shorter. It was very difficult to cut because this is very sturdy plastic but I got it done.

This is a good product with one significant problem. The material is heavyweight, it's easy to insert cords in the back groove, and the beveled edges reduce tripping hazard compared to just having a bare cord running across the floor. The problem is that the product arrives tightly coiled in the box, and the last foot or so is actually coiled in the reverse direction, presumably for some efficiency in the manufacturing process. The result is that the last 1 1/2 to 2 feet are bent in an S-shape, and the material doesn't return to flat, even after being out of the package for a while. I tried bending it back into shape, setting it out in the sun in the hope that the heat would help it settle, but it remains stubbornly bent. The curve is so strongly set into the material that the included adhesive tape won't keep it stuck to the floor. I'll probably have to just cut off the last foot or two, but then I'll end up with a much shorter cover than what I ordered. Good product, but the poor way it was sent means I can only use about half of the strip.

Works well. Leave it stretched out in the sun for a while to help it lay flat. It cut easy with a sturdy pair of scissors.

Wiremold for protection of wires that need to cross foot traffic areas so that people do not trip over the wires. The construction of the wiremold is such that it prevents the slippage of the wiremold on the floor very well, though this is NOT adhesion. It has no Drying Power other than it may keep the cable from becoming saturated with water that may be spilled on the floor. The material is such that it appears to be very sturdy in protection of the wire on a high foot traffic area, and keeping it all safe.

Good

Tip - lie in sun or a warm area to straighten out before use

Great item to have and hubby hasn’t complained about the wire across the floor.

Use it to cover air pipe for my fish tank across the living room, works every well. However, it's not ivory, more like light brown. So if you have white floor tile and was thinking of masking it, sorry!

This cable management cover is perfect for keeping wires organized and out of sight. It’s easy to use, durable, and makes my setup look so much cleaner. A simple and affordable solution for messy cables—highly recommend!