T9 WIFI Smart Thermostat, Smart Room Sensor Ready, Touchscreen Display, Alexa and Google Assist

If you have never used a thermostat with remote sensors, you really don’t know what you are missing. It is great being able to place sensors inside of rooms instead of having to hope that your hallway is the right temperature. That really only leaves two choices of thermostats, the Honeywell T9/T10 or Ecobee. We recently moved into a brand new house with two separate HVAC systems, one for the main level and basement, one for the top floor with the bedrooms. The builder pre-installed Honeywell T6 thermostats, which left a lot to be desired. They worked well with the Ring system that came with the house, but that control is limited to the mode and temperature. You either need to use the touchscreen on the thermostat or the app to make the most of it. Due to the way the T6 was installed in contractor mode, I could not get them to connect to the Resideo app. The T6 also does not support remote thermostats, which really is a game changer. There are a couple of differences with the T6 compared to T9. T6 has battery backup (I don’t really care as long as it doesn’t lose its programming). T6 connects to Z-Wave, which makes using it with a security system easier (plus Ring only supports two thermostats if they are connected to Z-Wave). Both connect to wifi and both should work with the Resideo app, but I could not get the T6 into the right mode to set it up. T9 has remote thermostats, T6 does not. I wanted more control so I decided to upgrade to the T9. The best part is that it was literally plug and play. I removed the T6 and plugged the T9 into the same wall adapter. I was able to immediately connect it to the Resideo app, which is really what I wanted. The Resideo app is actually not bad, it gives me full control over both thermostats. We have purchased additional remote sensors and have two for each thermostat, I really like being able to place them in bedrooms since we usually have our doors closed. I work from home and have one sensor in my office, one in our living room. I did find that occupancy detection doesn’t work as well as I had hoped because I use a space heater in hopes of saving money and that means the office is warmer than the rest of the house. In the summer and on weekends it works a lot better. With the Resideo app you can easily tweak the settings from anywhere and you can program each day individually. If days match it groups them, but they don’t have an easy way to remove customization for a day. That is nice because I try to go into the office one day a week. I wish I could program heating vs. cooling different for things like the fan because in the winter I want it set to circulate upstairs, in the summer I want the fan off on the top level during the day so I’m not moving the hot air around as much (those vents are in the ceiling), in the winter I want more air circulation. In my previous house we had installed an Ecobee 3, the first model with Apple HomeKit support (which we never used). The Honeywell T9 is competitive with the Ecobee in most of the features you will actually use, but that Ecobee had a couple of features the T9 does not. First, Ecobee supports accessories, for example, you could use it to control a whole house humidifier (I wanted one but never bought one). T9 doesn’t do that. Second, Ecobee can use occupancy to control whether your house is in home or away mode, which would be useful for our top level since nobody is in the bedrooms during the day. T9 uses geofencing, which has a lot of disadvantages in comparison (everybody needs it on your phone, cannot distinguish between home and on that level). Newer Ecobee models add even more sensors and even Alexa. Ecobee also lets you tweak how often the fan runs, Honeywell just has circulate, which runs on their schedule. Ecobee also looks more premium than Honeywell. The T9 is functional but not as modern of a design. Their sensors are large white blocks that really stand out when mounted on a wall. Considering all of the white Ring products I have, it kind of fits in, though. I probably would have chosen Ecobee over T9 if the price was similar, but Ecobee is nearly double the price and their remote sensors are more expensive as well.

I wanted a thermostat that I could program, not on that was self programming to my schedule (large internet company one). This is it! Works great. I have a heatpump system, and had no problems hooking it up. It has a weekly schedule if you want to set five days easily, or you can do all seven separately. I set mine for weekday and weekends (two schedules). Has four daily slots (rise, leave, home, sleep), but looks like you can add more. I bought two room extenders, and they work great. I have an older house, and the thermostat was in a hallway that was off the main area. The room extenders are great as they were easy to add and let you tell the thermostat what to weigh on heating/cooling decisions. Are you in the living room or your office all day? Set the thermostat to look at that sensor. Your bedroom hot at night? Set the schedule to look at the hall and bedroom when deciding to come on. The main reason I bought this was the auto switch between heat/cool and the fan circulate mode. I hate having to babysit the thermostat on freezing nights and hot days. The Auto switching is great. The auto circulate fan setting is great. It will circulate air about twenty minutes an hour just using the fan to keep the house at a good temperature so it doesn't have hot and cold spots on those times when you are on the edge of the temperature range. I use it for the night. This thermostat is not the most attractive, but I would recommend it. The only issue you may have is that the thermostat always seems to be back lit. Not sure if that is adjustable, but I love it because it acts as a soft light in the middle of the night for guests on the way to the bathroom. Great product.

Our home came with a "dumb" T6 thermostat. But being a newer Honeywell thermostat model, the backplate is the exact same as the one that came with this thermostat. So installation was literally pull the old face panel off, and snap this one on there, plug and play, 30 seconds job. Setup was incredibly easy too, the step by step setup on the screen is pretty intuitive. There were a lot of reviews saying if you have a mesh WiFi, or any system that's got the 2.4Ghz and 5Ghz band combined it would not work, and that worried me at first, because I want to have my device under one SSID, and I have several APs on my network. But the solution to that is actually very simple, I just found a old network extender, set the extender to connect to my home network, where it can read and connect to my main combined band WiFi, and then ask it to broadcast the extension network in 2.4Ghz mode only, under a different SSID. I then connect the thermostat to that extended network, and problem solved! It is still managed by the DHCP server on my main network, the thermostat never drops offline, and I keep my combined 2.4Ghz+5Ghz single SSID setup for the main WiFi. I used it like this for about a month now and had zero issues with connectivity. I agree this should not even be a problem to begin with in this day and age, but this workaround took me less than 10 minutes to get setup and running, and half the time was trying to reset my old network extender to factory settings... I did notice the humidity sensor is a bit off though, it reads high by about 10% compared to my other humidity sensors in the house, and those 3 are all in agreement +-2%. And it's not just the thermostat itself, I bought a separate room sensor for it afterwards, and that ones reads about 10% high too, so maybe it's just how they are calibrated by Honeywell? But anyways, that's not the reason why I got it to begin with so it doesn't matter much to me. Overall very happy about the thermostat, the only show stopper that worried me initially was the WiFi situation, and that turned out to not be a problem at all.

Because I have owned both Nest and Ecobee thermostats previously, this review specifically compares the Honeywell T9 to those products. Here is where the Honeywell T9 is superior to the Nest or Ecobee - Price/Value: The T9 is priced very well compared to the other options and offers most of the same features and benefits - Installation and Setup: The T9 was incredibly easy to install and configure for our home. I have experienced none of the internet connectivity problems mentioned in other reviews. - Remote Sensors: The Nest does not have this feature. The Ecobee does. It is a great idea and makes it possible to more easily balance the temperature throughout your home. Here is where the Honeywell T9 is inferior to the Nest or Ecobee - Design: Both the Nest and Ecobee are aesthetically more pleasing though the T9 is certainly not unattractive. The T9 main unit does not detect your presence in the room and thus requires the use of a redundant remote sensor if you want to program the system to recognize whether a room is occupied or not. As a result, the display remains active at all times instead of toggling to “on” when it detects movement and “off” the rest of the time. - Mobile App: The Honeywell App is easy to use and straightforward but not quite as impressive as the Nest and Ecobee Apps when it comes to features and flexibility. Some of your preferences can only be programmed on the thermostat itself. - Auto Learning: Both the Nest and the Ecobee will learn your living patterns over time and create a schedule that matches those patterns. The T9 simply offers a manually programmed schedule or Geo-fenced option. Overall, I am very happy with the Honeywell T9. It is a great option if you are looking for a more affordable option to the Nest or Ecobee units. Since I have a dampered HVAC system with 3 separate zones in our home, the lower cost of the T9 was substantial and worth the savings.

Very helpful. Works well. Need an electrician to install and C wire or else battery runs out quickly.

I have been slowly converting my home to a "smart house". So, I have experienced a lot of smart device successes and failures! That said, the T9 has certainly been a success! By success, I mean it provides all the modern features you would want from a wifi connected device, plus a few features not offered by the competition. I found it easy to install and super easy to configure. I appreciate that it supports either 2.4 or 5 GHz wifi networks. I also found the display to be of high quality, and it was as easy to use as my iphone touch screen. I also use the Resideo phone app to control the thermostat. I found the app to be intuitive and easy to use. Here is what sets the T9 apart. The remote temperature sensors!!! We have two rooms that are often 3-5 degrees different from the rest of the house. One of them is our bedroom. I placed a T9 remote sensor in each of the two rooms, and the two rooms are already much more comfortable. Because the T9 allows you to setup the thermostat temperature control at the base unit on the wall, and/or at the remote sensors, I have greater control of the temperature in our house. When using the remote sensor(s), the T9 allows you to select which sensor is used to control the thermostat. The remote sensors can be configured to work in one of two ways: 1) become operational when they detect a person is in the room 2) just to operate as a temperature probe for the room. This is important because the T9 allows you to change how and when the remote sensors are used to control your HVAC system. As a "programmable" thermostat, you can select the desired temperature based on the day(s)-of-the-week and the time-of-the-day. However, the T9 also allows you to select which temperature sensor is used to determine the room temperature during different times of the day! Here is an example: We have three T9 temperature sensors (one at the thermostat display and two remote sensors). During the week days, we use the average of the temperature between all three sensors. At night we only is the remote sensor in our bedroom to control the temperature. On the weekend, we only use the remote sensor in my "office" if someone is in that room. Otherwise, the average of the other two sensors are used to control the temperature on the weekend. The ability to select which sensor (or combination of sensors) are used to determine the control of out HVAC system has been a game-changer, and it has really helped us make our home more comfortable! One more thing. We wanted a small thermostat that blended into the background of the wall. The T9 does this wonderfully. Unfortunately, many of the other modern thermostats want to make a bold statement with their glossy black appearance (also with their large size, and as they stick way out from the wall)! Making a bold statement may be fine for an expensive car, but it is not what we wanted from our thermostat. Last thoughts: Many other reviews cover the need for a "C-wire", or the fact that you may have to do some wall painting when replacing an older thermoset. I'll just remind you to consider these things before buying the T9. However, if you have isolated rooms in your house that vary in temperature, then the T9 with the optional remote sensors is a great option for you! Oh, BTW. The remote sensors stick to the wall using 3M Command strips (provided with the device). They are battery operated, and they claim to have over a year of battery life on AAA batteries. They connect to the main unit using a proprietary wireless connection.

The unit looks good and is easy to install. The temperature was kept accurately, but cycled on frequently to do so. No temperature swing setting available. The accuracy is a benefit to comfort but is harder on the HVAC equipment. Unfortunately the unit only lasted 9 months. The display unit would black out multiple times per day. The circuit and breaker all checked out fine, as did the wiring to the thermostat. It is a faulty unit. We will see how the warranty works.. I will update the review accordingly. **Update** Honeywell refuses to provide any repair, replacement, or refund. They asked for me to provide them with information from the thermostat settings menu. I explained that the information wasn't available as the thermostat is no longer hooked up. A temporary replacement unit was installed after the T9 was found to be defective. Honeywell then stated I'd need to provide an invoice that detailed exact voltage readings that were taken from the dead unit. I didn't receive an invoice with that information when it was diagnosed. I'm certainly not scheduling and paying for a 2nd technician visit to perhaps receive help from Honeywell. I'll be shopping for my next thermostat and it won't be from Honeywell/Resideo.

I just had a new AC system installed into my condo and had been using a nest 3rd gen thermostat for the last 7 years. The HVAC guys told me that I should consider switching my thermostat due to the amount of service calls they've had where the nest was the culprit. So I did some shopping and came across the Honeywell T9. I decided to pull the trigger and order it. So far I like it alot over the nest, seems to react to temperature changes more quicker than my nest. Things I like about the T9: - Can be paired with external sensors (purchased separately) that can be placed elsewhere in your home to have the thermostat use those for temperature readings versus relying solely on the main thermostat. - The T9 can monitor the main thermostat and sensors you select- it will then create a general average ambient temperature between the main thermostat and the other sensors for a master home temp to reach. Thing to note on this is - do not place the sensors in direct sunlight and also place them on interior walls so they are not falsely reading heat from sunlight or a cold draft from a vent or thinly insulated exterior wall. When you enable scheduling on the thermostat, you can schedule time frames for high and low temps and which sensors to monitor and what time to monitor. -The thermostat connects with Accuweather to tell you the weather forecast for the day / week you can see from the master thermostat or from the Resideo app.This is based on the zip code you enter during setup. -While you can have the thermostat turn the blower on for your air handler or run it randomly to help circulate air to cut down on energy consumption - it does not let you specify a time frame or a schedule for the fan itself. I miss that with the nest where I could tell the system to run the fan for X amount of minutes every hour. With the T9 you can either specify the fan to AUTO which tells the fan to turn on when a call for heat or AC is made or you can select CIRCULATE which will tell the fan to kick on I think for 30 mins every hour to help circulate air. - Geofencing in the resideo app is nice, it will bring up a map based on the address you provided during setup. You can manually create a geofence around your home, where the app will use the location services on your phone to see if you are within the geofence boundaries to use your home temps. You can then specify temp ranges under the schedule to use while you are away. When your phone passes the threshold of the geo fence you specified AND you have enabled scheduling on the thermostat, the T9 will then stop using your home temps and switch over to away temps that you set in your away schedule. You will also get a notification on your phone that you have left the Geo area and that Away temps will now be used. Some things to be aware of : - During setup you may get bombarded with some windows on the thermostat AND in the app and it is possible to miss setting the correct number of stages for hot and cold for your HVAC system- I had this happen where I inadvertently skipped over the Cooling stages- so even though I had wired up the AC to the thermostat- the T9 did not think I had an AC due to me skipping over it during setup due to being bombarded with popup windows. Its an easy fix though- from the Thermostat if you go under Advanced Settings, you can interface with the Heating and Cooling stages, all you need to do is make sure you have at least 1 stage added for both heating and cooling, or more depending on your specific system. You can add the missing stage under the settings which will add the missing mode for Heat or Cold, then you should be good. -With the Resideo app,note that your usage data takes a few days to display. When I first installed my T9 it took like 3 days worth of the system running to generate data, Honeywell really needs to improve this. With my nest, energy consumption for the day would be ready the very next morning. It would be nice to have a more real time view into this to adjust my thermostat accordingly so its not using too much energy. Overall I am happy with my purchase, paired with the new AC, i feel like im using close to 50% less energy than I was before. -

J'ai été plus d'un mois sans être capable d'enregistrer mon thermostat dans l'application Honeywell Home App. J'ai contacté le soutien technique d'honeywell home par téléphone et par messagerie instantané. Réponse rapide et très courtois et ils ne niaisent pas avec les détails d'usage. Cependant ils n'ont pas été en mesure de trouver le problème et il m'ont suggérer d'effectuer un retour/échange. Dans une ultime tentative de dernier recours, j'ai effectuer une 4e fois une remise a l'état d'usine et cette fois j'ai choisi l'anglais comme language de configuration. Je ne sais pas si c'est vraiment ce qui a fait fonctionné le couplage avec mon application, mais cette fois ça fonctionné donc si vous avez le même problème que moi essayez ça.

En general funcionan bien, y la app ayuda a su manejo a distancia, pero después de un año tienen fallas, y es imposible encontrar datos de servicio para repara o aplicar garantía. y ya me empezó a fallar el segundo termostato

This thermostat is not able to control the fan speed if the AC unit. Two options only: either off or full speed. Very inconvenient.