Tenacious 3D Printer Flexible 405nm UV-Curing Resin with High Impact Resistance Standard Photopolymer Resin for LCD DLP 3D Printing (1000g, Clear)

Wow! Incredible resin Paired with the siraya fep film I am getting cleaner looking, crisper prints with less warping Bang for your buck!

Great resin to mix into the cheaper abs to reduce breakage works well on my ELEGOO

This resin is xlnt and prints beautifully with the correct settings. One thing to note is this resin needs to be used at least 26Deg Celsius for best results. At first I tried it and room temperature was 22 deg and I got bad cracks and layer separation. Then I bought a resin printer heater and set it to 27 deg c and let the resin in the vat and the printer warm up for 30 minutes then printed and then everything was perfect with no setting changed beside the temperature. Strong with a little bit of flex. Odor is I would say medium compared to others, It's not odorless but also not strong as well. So I would say medium-low odor compared to other resins so all in all very good. Sirayas stock settings work well on the MONO M7.

Super durable, flexible, without loss of detail. I mixed it with a ABS like resin to reduce the price.

I'm experimenting around with some new resins, and this stuff so far has been extremely easy to work with. The settings provided by Sirayatech worked with minimal, if any tweaking and I've not had any failures since I started, they seem a lot more durable than the previous resin I was using as well. Only thing is that I didn't care for was that it wasn't as flexible as I liked, so currently I'm trying to mix with Sirayatech flexible to get results I'm happier with. The only things I noted that aren't a real issue to me, is the odor seems to be a bit stronger than the other resins I've used, but I keep my printer out in the garage so this isn't really an issue to me. It was a darker gray as well than what I was expecting going off the picture, but that makes no impact to me personally. I'd recommend giving it a shot, so far I've been getting a lot of mileage out of this resin.

This resin isn't rubbery. Let's get that out of the way first off. It's not like printing with NinjaFlex on an FDM printer. Parts that are made with this resin will deform, but it takes a little effort, and they go back into shape, but it takes a little time. They are more like soft plastic than rubber. But that deformation and give makes them incredibly strong and able to withstand heavy impacts. This would be a great material for outer casings or bumpers or tubes that needed to have some give to them. Resin from resins printers is often really brittle, and this can be added to some other resins to make them much more usable and less liable to break. You don't have to print with 100% Tenacious (although the items I've posted above are), as you can mix it in to add impact resistance to other resins -- and that's really where its primary value lies. Alone, it's a kind of whitish/clear resin that's not clear enough to be see through, but not opaque enough to be white. It's a bit soft, so it can scratch relatively easily. It doesn't yellow heavily, but it's more the colour of 'natural' PLA filament. It also has a kind of strange refractive colour that looks very blue to purple in daylight. I'm not sure what causes that, but it's interesting. Overall, though, I'm super pleased with this resin. It's a great addition to the arsenal of Siraya resins (Blu being the one I use most, followed by Sculpt and Tenacious in a head to head with both of them being more commonly used as additives to other resins for my stuff). It's a spectacular flexible resin for the price.

It wasn't obvious to me that the Easy Grey Tenacious has different properties and cure times than the other Tenacious colors, because they're all sold under the name "Tenacious." I wish it were stated clearly, because I wasted quite a bit of resin trying to troubleshoot. I had read so many reviews about people mixing Siraya's Tenacious with their Fast resin (or other brand resins), so I was confused that adding Tenacious Easy Grey to my Fast resin didn't make any difference in durability. I decided to try printing with just the Easy Grey (not mixing it with any other resin) and followed the curing guide for Tenacious on Siraya's site... which says to cure Tenacious prints for 25 minutes (!). That seemed crazy to me, but I prefer to test manufacturer guidelines before experimenting. There was no alternative cure time for the Easy Grey. Unsurprisingly, the prints were extremely brittle and broke with the tiniest bit of pressure. I E-mailed Siraya about it and they said: "First, Tenacious Easy Grey is not exactly the same as Tenacious Clear. It is easier to print and has excellent flexibility compared to standard model resins. But it is not more flexible and stronger than Tenacious Clear. Second, Tenacious Easy Grey is engineered for high impact resistance, ensuring models are both flexible and durable, so you don't need to mix it with Fast Grey because it has better mechanical properties. For the issue you mentioned, you can try to reduce the curing time to 10 minutes because the smaller model requires less curing time. If the curing time is too long, it will get hard." I don't understand why Siraya doesn't clearly outline the different properties and cure times between the different Tenacious colors. Or just market the Easy Grey as its own line. It would be very easy for them to clarify it up front, and it would save their customers money and frustration.

Printed quick and easily on my Saturn S4 U, and had a nice flexibility to it when cured at room temp, but when cured in 60C water the hardness increases, and barely has any flex to it. It has a nice rigidity with enough elasticity which seems like it will resist shatter when under stress. Feels like it rivals Siraya Tech's Blu Nylon Black when it's been heat cured, which could make it a good value alternative. Has a nice transparent smoky blueish purple color.