Hopkins Towing Solutions56200 Plug-In Simple Towed Vehicle Wiring Kit

Very pleased with the quality and price of this product. Installation instructions were generic and not vehicle specific, however, with the help of You-Tube I was able to install the harness. It took me longer than anticipated, but that seems to be my norm. Some knowledge of simple trailer wiring is beneficial. Once the product was installed it worked perfectly. Wiring from the rear lights to the front of the toad / dingy was time consuming as there were no specific directions given on the instruction card. I would recommend this to others as it works well and is inexpensive. Doing it myself saved me $150-$200 in comparison to having an RV dealership or trailer hitch shop performing the work.

One warning, If you're not installing it on a GM vehicle with the factory wiring harness you will need hopkins 40985 Multi-tow harness connector. Makes conversion from a plain 7 pin connector to a dual 7/4 a snap, and way better than having the 4-flat connector hanging loose under the truck.

Plenty of installation videos on you tube make installation easier. No problems with this product. The harness went in easily. Watching someone else do it first answered a lot of questions and showed tips and tricks I wouldn't otherwise have known.

Wiring harness came with instructions & was fairly easy to install. I installed this on a 2016 Jeep Wrangler. However, I had to drill a hole to put the harness into the right tail light compartment and then fill the hole back with expanding foam. The instructions lead you to believe that you just drop the wiring in place. It also took more wire ties than were included to fasten the wire underneath the vehicle. But, once complete, everything worked as advertised.

Worked perfect for towing our 07 Jeep Wrangler unlimited behind out motorhome. 30 minute install. Phillips screwdriver and a pair of wire cutters for trimming zip ties.

Much easier to install than I anticipated. Watching the YouTube on the process was easier than the written instructions. As always a great quality product from Hopkins.

The plug and play is simple but routing the wiring in our Jeep Wrangler was not so much. Although now that it is done it works great and will always be tucked away. Won't have to mount and dismount magnetic lights for every trip.

Super easy to install works as intended

Nice product. Lots of wire. I removed the 4 pin end and used a 6 pin because I needed another lead leaving the wrangler to the RV. Would recommend. Great to have the diodes to isolate the towing vehicle. Be advised if you are towing the wrangler and using a readybrake or other mechanical brake system you need to isolate the wranglers break lights with a relay otherwise when the signal lights are activated on RV the brake pedal in the wrangler will over ride that turn signal with a solid brake light.

Excellent fit on 2018 JK. NEEDED IT ON JK TO TOW BEHIND MY MOTORHOME. ....VERY PRICEY....SHOULD BE ABLE TO OFFER AT A MORE REASONABLE PRICE.

Amazon shows this part to fit a 2018 jeep wrangler. It does not work it has been advertised as the correct part on AMAZON. Hopkins (the producer) said it is the wrong part, It should be PN 56210 not 56200 as shown on Amazon. How do i GET MY MONEY BACK?

Worked great very fast delivery. Now we can tow behind the motorhome.

Easy to install, works great