For a recreational cyclist, is this or the Finish Line dry lube better?

This stuff is the thin liquid oil that flashes out some dirt and then stays on the chain to lubricate it. It will remain on the chain even after some water gets on it as oil repels water. Dry lube is different. To use dry lube first you must clean the chain. Then apply dry lube. Dry lube does not last as long and does not resist water But it also does not attract dirt lie oil does. If you clean the cain every 100 miles or every week and there is no rain, dry lube is good. This 1-step is for those wanting to get the job done and not mess with their chain so often. Most cyclists would have 2 or 4 different kinds of chain lube and use one when they are in a hurry (this one is good for that) and another for when they have 30 minutes or an hour to do a full de-grease and tooth-brush cleaning and lube.

How do you use this? I’m new to bikes

Put your bike in a stand so you can spin backwards. Protect the floor(you are going to be dripping dirty oil). Back pedal (by hand), and slowly drip Finish Line onto the chain while it is running. Do this until the entire chain looks wet. Then keep running for a bit longer to work the oil in. Then, using a rag or paper towel, gently grab the chain while still pedaling backwards by hand. Watch that you do not get the rag caught up in the sprockets. Do not get your fingers caught up in the sprockets, or any other body part. It will hurt. Consider nitryl gloves, as chain dirt is really dirty. I usually repeat this 3 times every 100 miles. It will save your chain. Change out your chain when it reaches 1/8" (3mm) stretch to save your sprockets. Watch utube videos on chain cleaning and bike maintenance. Keep up on it and your bike will last 30 or 40 years or more.

can you clean your chain with 1-step cleaner/lube and then follow up with 1-step dry for lubricating?

Yes, this is the ideal application for 1-Step cleaner and lubricant.

Can i put this inside a chain cleaner? Do i need dry lube too?

You’d have to run that by the chain cleaner manufacturer. I’ve never used a chain cleaner, just dish soap and warm water, then finishing with the chain lube and a wipe down.

Material	Specialty Compound
Brand	Finish Line
Package Information	Bottle
Liquid Volume	120 Milliliters
Item Weight	0.25 Pounds
Recommended Uses For Product	Chain lubricant
Specific Uses For Product	Bicycle Drivetrains, Extreme Conditions
Item Form	Liquid, Spray
Global Trade Identification Number	00036121005037
Manufacturer	Finish Line
Unit Count	4.0 Ounce
UPC	036121005037
Number of Items	1
Item Package Dimensions L x W x H	5.59 x 2.32 x 1.26 inches
Package Weight	0.12 Kilograms
Item Dimensions LxWxH	2.5 x 1.25 x 5.5 inches
Brand Name	Finish Line
Suggested Users	""
Part Number	FIN-D-TOS04001
Model Year	2009
Style	4 Oz
Size	4 oz
Sport Type	Cycling

Finish Line

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة