How long is the cure time for this sealent?

The back of package says to apply a 1/16-1/4 bead and finger tighten bolts until it starts to squeeze out then let dry for one hour. After that torque to spec.. Allow 24 hours to fully cure before filling with fluids and returning to service (allow more time to cure in cold or very dry conditions). I followed these directions and it worked perfectly.

Can this be used on a subaru cvt transmission oil pan?

I used it on a Kia Transmission pan after I changed the transmission filter. That was about 30,000 miles ago. I also used it on a Dodge Grand Caravan Transmission pan around 10,000 miles ago and have had no leaks. I cleaned both surfaces lightly scraping the factory gasket off and then used brake cleaner to clean both surfaces, then put a bead on the transmission pan and let that just sit for 10 minutes then installed the pan, torqued the bolts close to specification. Be careful not to over tighten and snap a bolt off. You can get them out but it sets you back awhile. After I install the pan. I pull the transmission dipstick and pull the drain plug out and let it sit 24 hours to cure in 55 degree or above air. Refill your fluid to the factory level and you should be good until your next transmission service for a filter change.

Material	Silicone
Brand	Permatex
Style	Thermal
Item Weight	85 Grams
Item dimensions L x W x H	8.9 x 3.9 x 1.7 inches
Water Resistance Level	Water Resistant
Item Form	Liquid
UPC	068622681106
Unit Count	1.0 Count
Number of Items	1
Color	Gray
Manufacturer	Permatex
Model	Sealant
Item Weight	3 ounces
Product Dimensions	8.9 x 3.9 x 1.7 inches
Item model number	81180
Is Discontinued By Manufacturer	No
Manufacturer Part Number	81180
OEM Part Number	81180

Permatex81180 Automatic Transmission RTV Sealant, 3 oz. Tube , Gray

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة