Titan Attachments Medium-Duty 60" Clamp-on Pallet Forks, 46" x 4" Fork Length, Rated 4,000 LB, Easy to Install on Loader or Skid Steer Bucket

Being that I am a Jack of All Trades and a master at a few and do metal fabrication and own about five welders I considered designing and building my own forklift attachments for my large farm tractor. I thought let me check on line at my usual two places, Amazon and EBay, which I did and these titan forklift arms caught my eye, especially with the middle brace stabilizer to prevent the arms from doing the greeting arms move, spreading open. Anyhow I ordered them and I just received them. Actually I was upstairs in my house and it sounded like a car hit my house. I ran downstairs looked out the window to see the FedEx truck pulling away and thought to myself that loud thump was my new set of forklifts. I opened the door and bent over to lift the five foot box up and was it heavy. First thought heavy duty for sure. Anyhow I just opened the box and was amazed at the quality of the build and the heavy duty construction. I must say way beyond my expectations for sure, and I dare say that counting my time and material I could not have built them for what I paid on Amazon. Very Impressive. Welds are industrial, not real pretty, but fully functional and acceptable. No weld splatter pimples. The forks I ordered are the 60" ones with about 43" of workable fork, the other 17" is used up by bracket attachment. The forks themselves are constructed out of what looks like 1/8" steel square tubing. Don't be fooled by the 1/8" because since it is in the form of a square tube design it is very,very strong . The large threaded handle clamp rod is about 7/8"-1" galvanized rod, and the horizontal green painted handle is about1" as well offering great gripping power and strength when torqueing the forks down onto the bucket. It appears that there is a slotted key hole which is designed to receive a chain of maybe 3/8" or 1/2" links to possibly further secure the forklifts by inserting chain into the keyhole and wrap the chain up and around the back of the bucket for further bracing or work as a safety catch to keep forks secure if one of the handles loosens up, preventing the fork from falling off of the bucket lip. Only a guess. The key advantage to these forks is certainly the middle stabilizer bar. I can see myself in the future modifying these forks to fit my needs, possibly welding on hooks, "D" rings etc. I would highly recommend these forks to anyone and you won't regret it. A word of caution. These forks will attach to any size bucket and certainly would be overkill for a small tractor and maybe dangerous as well adding to much forward weight to your tractor especially if you lift a real heavy object. Smaller tractor owners should opt for the 30" forks, offering a little better weight balance. Good Luck everyone. Wjhit

I installed these on my Massey Furgeson GC 1725. Install was quick and easy. The Massey has a bucket that is nearly an inch thick so I have had issues with some other bucket attachment items. Not these. They slip on easy and clamp down secure. I got the spreader bar with mine and it keeps the forks from swaying or bowing in or out. The forks work very well and far exceed the capacity of my tractor so I'm not worried about them bending or breaking. Welds were all down nice and beefy and there are no cracks or missing spots. Even the paint job is well done. I lifted some branches with zero issues, and even tested it out on a 400 Lbs kids fort I built years ago. The forks are hard to see when the bucket is lowered or tipped down but with some back rails and practice this will be easy to use (I have run a fork truck, and loaders with SSQA forks so I do have experience with fork use). I only need forks once in a while and this represents an amazing deal for occasional use fork needs.

Heavy duty, works well. Only complaint is trying to get the clamp screws tight enough where they don't let the forks move. I have to use a small, maybe a foot long, piece of pipe for leverage to tighten the screws. Overall sturdy, good value.

I purchased these forks to transfer bucked trees and brush with my B-series Kubota and...(drum roll)...to my surprise they arrived only two days after my order, even in the midst of this pandemic! It literally took fifteen minutes to unpack and install these forks on my bucket with only a Crescent wrench. Minutes later, I was happily moving logs, limbs and brush I had accumulated this winter to my burn pile, avoiding days of laborious hand-dragging of heavy, gnarly oak branches. First impressions: 1. Poorly packaged in flimsy corrugated cardboard in which the forks had punched through. Fortunately, no parts were missing or damaged. However, as the FedEx driver was unloading, one of the forks slipped through the ripped end crashing to the ground just inches from his foot. This could have been a disaster! 2. Forks and stabilizer are of heavy-duty, high quality construction. 3. Design is thought-out, including options for chains to reinforce bucket and for adding a backstop to prevent load from rolling back on to bucket and damaging exposed hydraulic hoses. 4. Printed instructions with drawings were included, although not really needed as installation is intuitive. 5. Bucket clamps are very substantial and, in my case, I was able to cinch down by hand without need for a pipe lever or hammer. (I checked tightness periodically during work and clamps held well.) However, if using with heavy loads on bumpy surfaces, I would recommend the extra effort and use of chains. 6. Great value! One of the best price-to-quality accessory purchases I have made for my tractor that should serve me well for life.

Adding forks to a bucket is a mediocre compromise at best. However, if you don't use them often and you don't use them to lift really heavy things, then this is a cheap alternative. Especially for those of us who do not own tractors with a quick disconnect buckets. I purchased mine with the stabilizer bar and also purchased super heavy duty ratchet straps with chain on each end to connect to the bars, wrap around the bucket, and hold the bars in place. Once that is all installed, these we decently solid for my purposes. I was helping our church to lift and move commercial blow up play houses. These are 400-500 lbs and are very difficult to move because they are floppy even with tied up. This made moving these a breeze and was well within my weight limits. Do not kid yourself, these are not the same as real pallet forks on a quick attach base. Also keep in mind that adding these to your bucket will make them much longer and therefore lower your lift capacity of your loader. For me, only using them for 400-500lb load once or twice a year, they work just fine.

These forks are exactly described, easy to install and very useful. We use them for moving hay and for moving obstacles for riding clinics. Much better than dragging the obstacles and messing up the riding surface.

quick attach, works well

Got all I was promised and came in two days. I put enough weight on to lift the loaded rear wheels of a 50 hp Kubota tractor and did no damage.