ZIYO ZPL8997 - (12 Bulbs) LED Interior Light Kit Replacement for Porsche 997 911 Carrera 2004-2012 + License Plate Light Bulbs Package, White Dome Lights Error Free

Works great on my 997. Plenty of videos on yt for installation. Complete kit, comes with all the lights. They are polarity sensitive, if they don’t light up simply flip the light or switch the polarity and it should turn right on. Test to make sure the polarity is correct before reinstalling the light housings and you should be fine.

Awesome! They feel like they’re quality, the only real complaint I have is that the glove box light is a bit too bright, if you open that thing while you’re driving at night, you might lose your night vision, but that’s not necessarily a downside, at least you can see what you’re looking for in there. The first time I tried these, they didn’t work, but I read on another review here that it matters what side of the bulb you plug into the socket. If you plug in a bulb and it doesn’t work switch left and right sides and it should work for you…

The kit works great. There are plenty of instructions available on how to replace the bulbs so I won’t get into that. The hard lesson I learned was regarding the glovebox lamp: USE CAUTION WHEN REPLACING THE PEANUT BULBS, particularly the glovebox lamp. Here’s why: The footwell lamps and the glovebox lamp have a metal shield that must be removed to get to the bulb. After you replace the bulb, you’ll need to reconnect the lamp to check polarity and make sure the bulb works, and then pull it back out and reverse the bulb polarity if it doesn’t light up. On my car, there wasn’t enough slack in the pigtail to manipulate the footwell lamp housings with the plug attached. So I verified that the lamp worked, pulled it back out and reattached the metal shield before final installation. No problems there … But the glovebox lamp has enough slack in the pigtail to check polarity and then reinstall the metal shield WITHOUT unplugging the lamp. And here’s the hard lesson… it’s VERY easy to short the lamp while installing the metal shield before final I found numerous threads on rennlist where that glovebox lamp stopped working while installing LED bulbs. DO NOT REINSTALL THE METAL SHIELD WITH THE LAMP PLUGGED IN. There’s apparently something like a fusible link inside the glovebox microswitch, so instead of a simple fuse to replace, you’ll need to replace the glovebox wiring harness which costs about $100

I don’t typically rave about products since they need to be what we pay for. In this case, the product was substantially more gratifying than the price paid. It totally changed the feel of interior from tired old century ambiance to modern bright (not overly) feel. Easy to install and if one YouTubes a how to, could be done under 15 minutes

I'm sure you could probably spend the time buying all the bulbs you needed individually, but the time you're spending is probably worth more than than the marginal amount extra you'd pay for this set. It's exactly as described containing all the LED bulbs that you need to replace all the "interior" lights with including the exterior license plate lights. It doesn't come with much else beyond a sheet that outlines the specific location of the bulbs, so if you find yourself having difficulty performing the actual replacement you'll want to consult your manual and Youtube videos.

Great value for the money. Came with clear instructions detailing bulb placement. Works flawlessly.

These bulbs are not good for continuous use or prolonged use. The heat caused chips to melt of and slide out of place resulting in bulb failure. This happened to three bulbs from the box. Not recommended

Perfect fit and easy quick upgrade to modernize your 997. Every bulb was included along with accurate instructions