Hi. The installation diagram does not exist. Only a bad figure in the manual. May I have a clear installation instructions or diagram, please?

I agree with you. I also did not find it very clear. My advice is to pay close attention to what to what is written not the diagram. It is very easy to install incorrectly otherwise. Also before you remove faulty sensor - not how the wires are attached and label them before removing. That way you can install replacement without instructions. Finally - new time delay switch is touchy. I would set it to middle position. Good luck.

has temperature compensation?

It may have temp compensation but locating it over an opening that is venting a pool area is beyond what the design is set up for. Ron

Does it work with regular led lights or only with dimmable leds?

This sensor works similar to a simple on and off switch. If it is dark and motion is detected it turns on. After a set period of time it shuts off. The load is irrelevant as long as it does not exceed 300 watts. So yes, this will work with both dimmable and nondimmable LED bulbs however, you will not be able to dim the dimmable bulbs.

Where is the unit screwed in to? Thanks..

This is not intended to screw into a light socket as you seem to surmise. It is intended to be attached to a knockout hole in an electrical box (either indoor or outdoor). You will then attach its wires to power and the lights to be controlled within the box in accordance with the instructions in the package. If you are not comfortable with home wiring, then I suggest you have the unit installed by an electrician. Adjustment of these devices is tedious to ensure that detection of what you want to detect (presumably persons) is detected and what you do not want detected (leaves in the wind, animals, noise, etc.) is not detected. This involves orienting the fixture and adjusting the sensitivity; this is a two-person job with whatever ladder you need to reach the device as it is installed. You may find that you need more than one sensor to do the job; it's just not possible to have a reliable detection region that is wide and thin. And, it cannot detect around corners. Good luck.

Brand	HALO
Color	White
Power Source	Corded Electric
Item Weight	5.92 ounces
Maximum Range	70 Feet
Mounting Type	Wall Mount
Battery Description	Battery not included
Compatible Devices	Light
Manufacturer	EATON
Global Trade Identification Number	00044427006337
UPC	044427006337 783961747404
Part Number	MS180W
Item Weight	5.9 ounces
Product Dimensions	2.75 x 3.5 x 5 inches
Item model number	MS180W
Is Discontinued By Manufacturer	No
Style	Classic
Finish	White
Material	Plastic
Pattern	Sensor
Voltage	120 Volts
Wattage	120 watts
Installation Method	Flush Mount
Item Package Quantity	1
Type of Bulb	LED
Plug Format	A- US style
Certification	CSA
Special Features	Motion-Sensor
Usage	Walkway
Batteries Included?	No
Batteries Required?	No
Description Pile	Battery not included
Warranty Description	2 years.

HALO MS180W 180 Replacement Motion Security Sensor Floodlight, White

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة