Fruit Crusher Portable Apple Pulper Grinder, Manual Juicer Mill for Wine Cider

Very easy to assemble make sure you only hand tighten until completed assembly then fully tighten at the end. Fits together really well and works well over a big brewers bucket. Could do with a frame assembly to hold it ridged when doing harder apples as needed 2 people for this. But it crushed 100 pounds of apples with no problems and it is easy to clean.

Some sharp edges and 2 of the captive nuts had disappeared so I replaced them with rivets. Sometimes difficult to align the machined holes. It is better when fixed to e.g. a wooden frame, as it did not fit the press well, as shown in the description. When smaller pieces of fruit were added they mostly went straight through, so I would advise 1/2 apples for example. The plastic grinder was a bit of a surprise but OK as long as it's harder than the fruit. Got through about 25Kg of apples in a couple of hours, pausing to press the pulp, producing about 8.5 L of apples juice. Reasonably easy to clean with a pressure hose and brush. Now the hard part is waiting for the juice to ferment...

Assembly captive nuts not very well fitted, some fell out on assembly and a bitof a fiddle to get back.The so called blades are plastic and do not cut fine enough, steel blades as seen on you tube are far surerior. Dismantling and repacking for postage fora refund is too difficult, so I will just put apples through 3or4 times.

Very happy with this, assembled in 10 mins and although some edges are sharp it's really well designed and constructed.

A good quality product that save a lot of time, works well.

Excellent customer service from Squeeze Master. Bought one of these in February and only got round to putting together about 10 days ago and well outside return window. Unfortunately some of the screws wouldn’t hold and a couple snapped whilst assembling product. Contacted company who promptly sent me a replacement item. Excellent service

From the start I found it difficult to align the holes, to assemble the hopper. Yes I could have replaced the captive nuts with rivets, but why should I have to?Spend the extra and get a better quality crusher.

Is a very useful tool around the farm. Especially if you are a wine or vodka maker. The quality is not so bad, is a decent one, the only downside is that the blades are made out of plastic and not metal as described. Good and easy smash for grapes or any other soft fruits. Overall I'm happy with the product. Thank you

The welding quality of some nuts is very poor. Couple of these nuts detached effortlessly when gentle pressure was applied to tight the screws into the nuts. Also, the alignment of the holes and nuts were not very precise, which took lots of effort to put together all of this crusher. Not very happy with the product considering the price I paid for it.