Silhouette SILH-Blade-DEEP SILH DEEP Cameo 3 Blade, White

Great

I bought my Silhouette with cutting 2mm craft foam in mind. I tried to get it to work with the autoblade but it couldn't quite do the job. Once I got the pressure settings right this worked perfectly. I peeled the excess off the cutting mat and all my shapes stayed put. It has a manual adjustment and the numbers don't line up quite right but craft foam calls for the deepest setting so it's not difficult for me to get it set right. YMMV.

Producto de calidad, buen servicio del vendedor

EXCELENTE CALIDAD

This blade is technically for the Silhouette Curio, though the Cameo can use it as well, as long as you understand the Cameo's limitations. The Deep Cut Blade is perfect for thin craft foams, felts, thin magnets, and some other materials under 2mm thick. It is not a ratcheting position blade, the depth setting is a smooth turn, which may help you get the precise thickness you need as it is very important for thicker material to be as accurate as possible. The potential issues I have found is that first off, you must realize that the Cameo only has so much cutting power. The Cameo can only push down on the blade with 210g of force, a little under half a pound. You won't be cutting through real chipboard or plastics with this thing, the Cameo is a craft cutter, not a water jet. The second is turning radius. The deep blade can cleanly cut basic simple shapes in thicker material like foam, though it can snag or miss inside corners. While you can do pretty much anything you can think of with some thought as to make certain cuts, I suggest that continuous cut lines do not have any turns that exceed about 80 degrees. You can do 90 degree cuts like squares, but the corners wont be as sharp as you would expect like paper. The 3rd thing is more of an issue if using with the Cameo, is that you may have to trim your material area to fit under the white rollers. I cut my foam to fit just inside while stuck to the cutting mat, and I don't have any issues. If anyone is wondering, Creatology 12x18 foam sheets use the 19-20 setting, force 33 and speed of 4. You can probably go faster if you have smooth turns in your cuts. The last thing is the price, which is way overpriced. I bought a graphtec holder and 15 blades cheaper than this thing. Too bad the graphtec doesn't cut as deep, otherwise I would tell Silhouette to craft themselves a bridge and jump off it.

I bought this specifically to cut leather and I can honestly say it did the job. My regular silhouette blade didn't come close to cutting my leather scraps but this deep cut blade cut it like butter on the first try. I can't speak to the longevity of it as I've only used it for the past month. I also can't say if it works on other thicker materials like chip board or foam. For the cost, this is worth it!

It was great product. Just wish that silhouette made more accessories for this machine.

Ya recibí los artículos, gracias.

Perfecta

جيد جداً

Me gustó porque me ha ayudado a entregar un trabajo de mayor calidad y con menos pasadas, es una excelente herramienta para quien tiene cameo 3.

We purchased this blade as a replacement to the autoblade that comes supplied with the Cameo 3 and, honestly; it just works. We're using this in a commercial environment (a retail store offering personalised items) and thus even under the moderate to heavy use that it has received using glossy vinyl it still cuts as if it were brand new. We do recommend cleaning the blade, of-course, but with its manual adjustment it's actually easier than the autoblade making this a significant improvement.

Bom produto, recomendo.