BianchiBelt Keepers

Overall real good handcuff case. Not really made for the ASP cuffs but work great with peerless cuffs. I still use my ASP cuffs with this case but you have to break it in a bit so that it will fit better. Here's a tip that worked for me. Lock your ASP hand cuffs and then put them in the holster. You'll see that you have to apply pressure but they fit. Leave them in there during your RDOs and take them out periodically and put them back in. They should be stretched enough by the time you go back to work. Again, this is only an issue with the ASP cuffs because the peerless fit just fine. These are quality handcuff case for the price. I do recommend.

Loved this product so much i bought two! Definitely takes on the wear and tear you put them through. Easy to use, light, and perfect for the price. Other cuff cases I've bought were no where near the quality of this pouch. If i ever need to buy again, I'm buying these.

Work great with my cuffs and comfortable

Great handcuff case, keeps my cuffs in place snuggly. Be warned they CAN be pulled out, and have come out during combatives. Nonetheless I do like them for everyday carry.

Cuffs fit snug and deploy perfectly

I bought this for the open top design because I don't want to have to struggle when I need to pull these quickly. I love the durable feel of it and I've practiced drawing my cuffs from here a few times using my link duty cuffs. They pull out smooth without feeling too loose. Gives just enough hug. There is.a small groove at the bottom to fit one or two cuff keys in easily. I keep one in and the other somewhere else on my person just in case or use my universal pen cuff key. I will say that once it fell out and didn't realize till my next shift when I found out a coworker found my key and put it aside for me. This was most likely my fault when I took my duty belt off and put it on the fllor of a stall when using the restroom I must've dropped it carelessly and didn't see my key fell out. Be careful I suppose. I've been mindful since and it hasn't happened again. Always have a spare somewhere else like I do for this reason. It can happen with any cuff pouch. That's just good advice for any officer.

I have S&W model 100's and it kind of upsetter me when i received this case cause my smith's weren't fitting in the case properly or when i forced them in, it would be extremely difficult to take them out of the holster. I talked to other officers at work with the same case but they both had Peerless model 700's and they told me it might be the bulkiness of the smiths, Though they DO NOT have this problem with they peerless. I was so convinced to switch to peerless and have my smith's in my back pocket as back up or something, When on my day off i figured, oh hell with it i might just give it one more chance before i spend the $40 on new cuffs. Well here's the trick folks, And it worked good for me and it still works great with a tiny set back. So the cuff that you're going to have closest to your body or duty belt as i should say, Close it to about the third or 4th to the last tooth on the cuff. The cuff away from the body or the one furthest away from the duty belt close it just enough that there is no teeth from the cuff showing. Place them together facing which ever way you're going to place to for ejecting them when they need to be deployed in an arrest (Don't put them in yet) Now slide the chain part in and rapidly smack them down at the top of the cuffs as if you're slapping them downwards in to the case. They're easy to deploy and i haven't had a problem with them yet. Hope this helps all you S&W people lost out there thinking there's no use to this case.

Its a nice holder but it almost holds the cuffs to tight. (S&W 100's) Maybe its just a "breaking in" period and it will get better but the way it is now you really have to push and pull to get them in/out. Although once they are in, they are in and aren't coming out without some major pulling. So you don't have to worry about losing them while running or something. Fits perfectly on my 2" belt UDPATE: So after some use I have more to add, There should be velcro on the back to hold it to the duty belt (I have velcro on the inside of my belt) which would help to better hold it in place. It has a tendency to slide around right now. I did add my own velcro to help hold it which is working good. I said above that they fit to tight, well i sat down and tried to figure out the best way. If you have one swing arm facing one way and the other the opposite way they seen to fit better. It also helps to try and slide on cuff in a little way before you start the other one. I'll post some pictures for reference. It seems to make them come out easier too. If you put them in facing the same way its almost to tight and has a tendency to racket themselves further closed, causing the end of the swing arm to start poking out, causing them to get stuck and held up upon removal.

Los grilletes no entran…

El material es muy resistente y de calidad

Love these cases. I bought 2 for my duty belt. My only complaint is that there is no velcro so the cases slide along the belt (but I am being really picky here). Recommend to all my brothers and sisters in blue!

Better than expected. Pearless fit perfectly. They dont fall out and stay secure. Easy to remove when intentional. Came right away.

Buen producto, estoy muy contento con el y funciona bastante bien ya que sujeta los candados a la perfección.