Fuji Spray 9600-G - Gravity G-XPC Spray Gun

Compact spray gun fits inside of cabinets to into tight spaces, perfect for water based paints and urethanes, works great on horizonal surfaces due to the cups ability to swivel in almost any direction even for overhead spraying. Very easy to clean, Great spray gun!!

I purchased a Fuji Spray Q5 about five years ago now and love it. When I ordered it, I decided to go with the T70 cup gun which is an awesome gun also. I thought that I would mostly be doing cabinets and such and that the larger capacity would be beneficial. It is a great gun, but I have always struggled a bit when I had projects that needed to be sprayed parallel with the ground and projects that were in close quarters. When I ordered the Q5 I debated on ordering the 96-GXPC swivel cup gravity fed gun along with the package to address these situations, but funds were tight at the time and the entire package is not inexpensive even with only one gun. I finally broke down and ordered the 9600-GXPC and have used it on my first project. Oh, how I wish I would have purchased it a long time ago! This gun is a dream to use. It sprayed the lacquer used on this project perfectly with the 1.4mm included needle and cap set. The swivel cup was awesome as I had to spray straight down on the letters of the solid wood sign I just completed. Clean-up was easy and straight forward just like my other Fuji gun and the finish turned out flawless. I probably will order a 1.0mm needle and cap set in case I decide to shoot any super fine finishes, but the standard needle and cap will do great with most clear finishes I would imagine. Can't be happier and I highly recommend this gun if you have a Fuji HVLP system!

I have an approximately 15-year old Fuji Q3 with an SC-1 siphon spray gun (all aluminum gun), and I was looking either for a conversion kit to turn my current gun into a gravity spray gun or for a newer gun to add to the tool chest. I contacted Fuji one evening, and Derek Campbell responded the next morning and answered two or three follow up questions during that same day via email. He told me what conversion kit I could buy, which currently offered gravity feed guns would work with my turbine, and what minor modification to my Q3 I would need to make, so that the newer non-bleed guns would work with my older Q3. All that required was drilling an existing 1/8" bleeder hole out to 3/16", which was located in the manifold outside my Q3 case. That was easy. I build furniture and cabinetry as a hobby, and I picked the G-XPC, as the tilt-feature for the gravity cup will let me spray in any direction, including upside down inside case work. I used the new gun with my old Q3 this evening to spray M.L. Campbell MagnaKlear, which is a pre-catalyzed conversion finish, on some Andersen Woodwright double-hung window frames and sashes we are installing. I sprayed half this evening with the new gun and half last week with the older siphon gun. The G-XPC was absolutely fantastic. The spray pattern and volume were easy to adjust, and the finish went down flawlessly. I was a little worried at first when I ran some straight lacquer thinner through the gun to clean it out and test the controls. It dripped around the large threaded collar that holds the spray nozzle in, however it didn't drip at all with the MagnaKlear running through it, even with it diluted 25% with lacquer thinner. After 15 years, my Q3 is still going strong, and I am very happy with the service from Derek at Fuji and with my new G-XPC.

I've been using a Campbell-Hausfeld HVLP system for many years and always wanted a quality gun rather than the $35 item that came stock. I spray water based finishes on acoustic guitars and I'm finding that the adjustable fan size on this Fuji seems to allow me to use much less finish product. I ordered the extra #3 air cap/needle set as I was told this might work better with a water base finish. In practice I prefer the stock #4 set up as I was having trouble with finish drying between coats in the very small apertures in the air cap. The #4 cap gave me nice spray spray quality without the "dryout" problem. I'm using KTM-9 finish. I chose the gravity gun mainly because I don't need more than about 8 ounces finish capacity. In retrospect the standard gun with the large cup below the gun may have been a better choice for me as I find the fact that the gravity gun needs a stand annoying. I purchased a stand from Amazon which works OK but overall this gun seems a little clumsy when you're not actually spraying with it. Since this Fuji is my first quality spray gun I found that there is a definite learning curve as it has more latitude of adjustment hence more latitude for fouling up. It's worthwhile to take a few practice runs with your finish material before you commit to a nice work piece. One little problem some previous reviewers mentioned was finish leaking from the cup lid, my unit also leaked even after a modest tightening. I intend to buy some extra gaskets and pressure tubes before my next project Somehow I got finish material in the pressure tube on a couple of occasions. It's about a 15 minute job to clean and dry them but if you have a few extras it's way quicker. The Fuji manual recommends keeping extras on hand. Despite some minor problems while learning this new tool I'm quite happy with it. It is obviously well made and just feels like a quality piece in your hand.

I have been using the Fuji Spray system for many years. Several years ago I upgraded to a larger turbine so thicker paints were spraying better. I thought I had lost my spray gun in a recent move and ordered a new one off of Amazon. It arrived in only 3 days - Excellent service! I am excited to be able to spray cabinets again with the great finish the Fuji system provides.

Received my GXPC HVLP gun today. What a game changer, so little over spray and so easy to control. I have previously been spraying all my projects with IWATTA guns, compressor fed, I could get a good finish but always a lot of over spray and excess air. Can't wait to get my other air cap sets that I have ordered. Thanks fujispray for a great product. Regards Bruce

Bought this to replace my old gun which had an air leak, great finish quality every time.

Second day shipping. As fast as I expecting. Because I can not wait, I did a test painting of cabinet side board with water base paint. The result is good and reaches very corner spot. I am happy with the gun.

First time using the G-XPC 9600 I found it was much easier than my T70 in tight spaces. Played down a beautiful finish on the TV stand i had just made. Well worth the investment.