XPEL Door Edge Guard Protection Film Roll, 3/8" x 100' - Car or Truck Doors, Protective Barrier Against Minor Scratches, Paint Chips, Door Edge Impact, and Dings - Prevents Damage and Possible Rust

invisible protection. Easy to use, recommended.

3 years ago I installed this tape in my 3 cars and the tape looks like new. My friend saw my car today and I told him about the tape, he said wow looks very nice, so I shared him the link and he is buying one.

Pretty easy to install and you can’t barely see that it’s thereIt works well

This film is pretty thin, I reckon no more than 8 mils thick. However, that's pretty standard thickness for PPF. Anyway, it's not designed to be bulletproof, it's designed to protect the door edges from mild dings should you (or your kids) be careless with door swings.If you plan to install this on a white car, you have to accept that dirt will eventually and permanently accumulate on the film edges, creating a black line along the edge of the door. For other colors, this will not be as noticeable.To prep the surface before installation, make sure you use a 70% isopropyl alcohol to clean the edge off. This film will not stick to oily or dirty surfaces. Do not use 99% isopropyl alcohol. 99% IPA evaporates too quickly to adequately dissolve any greases or oils. Besides, it is usually reserved for cleaning electronics that cannot tolerate water.Equip sufficient illumination to improve visual accuracy of film installation or you may end up with rather wavy looking film edges.After my installation experience, I realize there is a limit to how far you can stretch this film to accommodate curves. If the curvature is abrupt, it is better to cut the film short and resume with a new end. Make sure every end has its corners trimmed to prevent them from rolling up over time (such as during a car wash). As you apply this film along the edge, you want to adhere the center first. Once the film is laid across the entire continuous edge, use your thumb to wrap the film around the edge.

I have used a similar product before and highly recommend applying this to keep the edges of your car doors looking new. They also provide a little protection for the car doors in the neighboring space should you lose your grip on your car door and it bounces against your neighbors door. Just don't rely on it since it isn't designed to prevent you from dinging your neighbors car door. Recommend ordering a narrow width...1/2" or less. Clean the car door edges with isopropyl alcohol, wipe it dry and the tape adhesive will keep the tape securely in place. Your car will only require about 3' or less per door.

Best product, very easy to apply

I got the 3/8th inch film. It's relatively easy to install if you take your time, and 3/8th is just enough to have just a little bit on each side. The downside to this is that the tape seems to thread rather easily -- you'll have tiny threads that stick off the edge of the tape. Whatever cutting process they're using to produce the tape doesn't seem to make clean cuts all the time.It's not a huge deal and you can generally just pull the tiny threads off, but it's a bit annoying.Other than that, install is simple, it's very hard to see, and 100 feet for 20$ is a pretty good deal. I don't know how long it will last yet, but two years seems reasonable.

Muy resistente y fácil de instalar