VERSAF Double Sided Tape Heavy Duty, 1/2" Clear Acrylic Mounting Nano Tape with Strong Adhesive, Removable for Wall Decor Art, Carpet, LED Lights, Car Glass, DIY Crafts, Poster (10FT)

Our bathroom mirror had an imperfection ripple in it at the bottom 1/4”. I just hated looking at it. The cost to replace the mirror was $1400. I found a brushed nickel mirror strip from an online site that matches exactly to the Schluter tile edge frame. The tape was a perfect answer to get it to stick to the mirror. Since it is clear you don’t see it in the reflection of the mirror. Peeling off the red film is a challenge. This worked. Take a metal strip (nail cutter handle and put the edge of the tape on it. Use tweezers to pull the corner of the red tape off. It may take a while but it will come odd. Pull off what you need and use it but leave and inch of extra red film at the end for the next time. Keep it in the plastic bag so the edges don’t collect dust. Solid product.

This tape is really good. It sticks very well and holds it in place. The thickness is perfect. I use red a lot for all of the wiring harnesses bundles. The heat resistance is ok for what I need them for. The durability is as good as anything out there. I really use the color red a lot and it serves it's function to help organize the wiring bundles.

It was what I wanted in terms of size, quantity and price. Users reported it difficult to remove backing were probably referring to subsequent uses. The thin backing is nearly invisible so I can see how some might get frustrated. Another reviewer suggested to leave a bit of backing exposed by folding the end of tape on itself to make it easier to grab the backing for next use. That worked for me. Yes it is very sticky, I consider this 'once and done' since repositioning would be difficult if not impossible. Think vinyl sticker "stickiness". I placed the tape at the start knowing where I was going to end up. I unrolled the tape as I went, pulling off a couple inches of backing as I pressed in place. When I reached the end, I made sure to leave some exposed backing. Don't remove all the backing at once. If you do, the tape will stick to itself and stretch as you try to maneuver into place. I applied the tape to the backside of a metal microwave door face plate. The hardest part after removing the mfg adhesive on the plate, was landing the taped-up plate exactly where it needed to go on the 1st try. 4 stars due to minimal packaging, no instructions or product specs.

This tape works well, it is great for crafts and household needs. It is also easy to use.

Love this product, was used to hold the cover of the passenger mirror of my car that broke and so far rain and shine it’s still in place in Miami Florida weather!

Do not use for wall hanging! Wanted a renter friendly way to hang some light things on my wall (less than 1lb), everything has since fallen down.

Very cheap tape. Cheaply made. When you get down to 3/4 of the tape it’s start tearing apart on all sides and holds no adhesive left. Lucky for me I bought 4 or else I would have been left empty handed and upset with the project I used it for. I only suggest it if you use very a little tape. If you need the whole roll, this is not the tape for you. 4 out of 4 rolls stop sticking and break after 3/4 use. Won’t buy again 👎

This tape is super strong! Highly recommend. I needed to hold some acrylic sheets to my pantry doors and it holds well even without the screws I used. I mainly used the screws only for decoration but the tape would have held it in place.