Lepro 12V LED Strip Light, Flexible, SMD 2835, 300 LEDs, 32.8ft Tape Light for Home, Kitchen, Party, Christmas and More, Non-Waterproof, Daylight White, Pack of 2(Not Include Power Adapter)

So far so good! I've purchased a couple of these to light up my shed and I have to say, pretty darn cool! No really, not hot to the touch at all!! Sorry. I cut each strip into three separate sections, used their tape backs to attach to the rafters and then wired them up to small solar station. I thought that just using the first strip was bright but when I added the second, WOW! It also helps that we painted the inside of the shed white and very light blue. Even though they come with strips of tape on their back (and which I gladly used) I also used some clear mono-filament and some small brads to zig-zag them to the rafters due to the constant hot and cold fluctuations. I've had the first set up for a while and, knock on wood, they've been working great. Easy to work with, very bright (even though I didn't go with the 5050 strips - larger LEDs further spaced) and they don't draw a lot of power. I opted for the "Daylight" LEDs because I wanted the most bang for the buck as it were. Not disappointed. I feel the warmer whites, in this particular implementation, would have looked "off" in a shed. My humble opinion, your mileage may vary. I would absolutely recommend these to anyone who is interested in a low voltage or solar lighting project. Edit: The picture shows a single LED strip (5m) that I cut into thirds. This is prior to installing the second strip. No other lighting and no special photo effects to make things look "brighter". That one strip put out a heck of a lot of light all on its own.

Good quality. Easy to install. Size is perfect for under cabinets. We usually don’t use a remote control with these lights. We connect them to a wall switch. Light level is perfect. Never had a light burn out. Only had to change out the power adapter after lights were on 24/7 for 5 years

I bought this on a lark because I'd been experimenting with LED strip lighting from a number of manufacturers, and found this unusually long LED strip at a good price. Though it didn't come with a power supply or switch, I figured I would be able to locate a suitable transformer for the 12V and 18W needed. It took some searching, and I must have checked about two dozen old transformers in my garage before finding one that had the right connector plug and electrical specs. You may have to some trial and error if you want to rummage your own power supply, or you can buy the one they suggest. So once I had it working what do I do with it? I soon found a lighting situation that couldn't be remedied with a normal lamp, but this was perfect. You have to be careful in removing the paper from the LED strip. First time I started, I started peeling both the paper and the adhesive off the back of the LED strip. But once you get it right, the adhesive sticks quite well. All of the LEDs worked first time, and still work. There was a strong chemical smell when I first opened and inspected the LEDs, and I'm not sure whether that is the adhesive or a byproduct of the LED manufacturing. Now that it's installed there is no smell. Overall, this is a great value. It's nice to be able to put an old 12V transformer to good use. The only thing missing is a switch. I'm still looking for a good way to set up a switch to turn the lights on and off, as now the only way to control them is to plug or unplug the transformer power cable or the barrel connector from the transformer to the LEDs.

When our house was built we should have had lights installed in all the closets ... but we didn't. After a recent remodel of our daughter's room I placed some LED strip lights (different brand) in her closet along with a magnetic switch to cut them off and on as the door opens, I knew that was what I wanted to do in some of the other closets. I bought these to do another closet which hold wrapping paper and photo albums and all sorts of random stuff that we need to access periodically and which can be a pain to find without proper light. A bit of soldering to wire it up to the power supply (I chose not to use the adapters that came with the lights, but certainly appreciate that I had them!) and to create a few T's for extra runs down the walls and they were done! As far as soldering, these were much easier to deal with than the waterproof versions I used on the previous project because there was no coating that had to be removed first. While I still chose to use staples to secure them to the walls, the adhesive backing on these was also much better than the waterproof ones of another brand. The lights are bright and uniform in color (even across two rolls ... which isn't always the case). They've been up for a few months now with no failures though they aren't on all that much. The reason I deducted 1 star is that throughout both rolls I purchased, there were several places where the adhesive backing seemed to be a tiny bit smaller / shorter than the actual LED strip. The result is a few random wrinkles where it bunches up a bit. It really isn't terrible and, at least for my application, isn't seen, but it also keeps them from being 5-star-worthy in my opinion. Overall, great product and price. I'd buy them again ... and probably will when I get ready to tackle that coat closet in our foyer (I HATE climbing through the attic to run wire)!

When I first opened the light I thought it looked a bit cheap and nasty. No problem though as when I tested it I was surprised at how bright it was. Fitting was very easy as the sticky backing is easily enough to carry the weight of the fitting which is very light. So I stuck it under the kitchen cupboards and connected it up to the light switch circuit and it looks fantastic as it lights up the oak flooring.

I cut these into 3 13.5" strips per tank, and they light the tanks up great! very easy to install, the adhesive backing is quite good compared to other lights ive used. they are stuck to eggcrate diffuser and were very hard to unstick if i misaligned it. Highly recommend! I even have about 3ft left over for something else i might need to illuminate. Its going to take a while to see if they are strong enough to grow the plants in my aquariums, but i have a good feeling about them.

Tack, jag är nöjd…

Très bon éclairement.

No tuve ningún problema con el producto, solo recuerda que no incluye conector a la pared y por alguna razón la caja marcaba que era luz cálida y casi me da un infarto, pero era luz fría (como quería).