5 Pack BESTTEN 2-Gang Screwless Wall Plate, USWP4 Glossy Off White, Decorator Receptacle Outlet Cover, Decor Switch Plate, H4.69” x W4.73”

What a wonderful design. Not only it’s affordable and well made. It cover the gap between the light switch really well. It’s looks modern and clean finished. It’s easy to install to replace the old cover. I don’t like the old style with the screw shown. This does the job and not flimsy.

Looks great. Clean edge and no show screws

very difficult to remove...

I used there plates to replace a number of wall plates which had been used for years in Hawaii. The old wall plates were the style with the small screws at their tops and bottoms (on the exterior surface), and those small screws were leaving rust stains. Kinda ugly if you ask me. So I replaced them with these wall plates and really improved the looks of the outlets and switches in my Hawaii home. Some reviewers have complained about the color. If you are installing brand-new switches and outlets, well I suggest that pay a bit extra and get the wall plates from the same manufacturer. In my case some of my switches and outlets have been replaced over the years and even the original stuff had no doubt changed color. Since I wasn't planning on replacing all of that hardware, I was happy with these switch plates even when the color was a bit off. Switches and outlets have a portion which protrudes and is supposed to fit within the rectangular opening in the wall plate. The protruding portion of an older switch in my home was bit big to fit within the rectangular opening in the wall plate, so I had to fuss with that a bit to get it into the switch opening of one of the wall plates. But for the most part I did not have remove any of the older hardware (which was doubtlessly from a variety of different manufacturers) to install these wall plates. So why another reviewer stated that "you must have totally remove the outlet from the wires to install" is a mystery to me. Maybe they had an unusual situation to deal with, but that definitely wasn't the case with me. These plates do seem to protrude a bit more than plates from other suppliers as mentioned by someone else and sometimes the fit between the protruding portion of the switch/outlet and the rectangular opening could have been better, but it wasn't a deal breaker for me. If looks and color are important, then buy the brand which matches your hardware. But these wall plates where quite adequate for me and look many times better than the old rust-stained plates that they replaced. So I am pleased with the result.

Looks great, easy to mount

They are right, the color matches Leviton switches so perfectly. I had previously installed Leviton cover plates and they have ever so slight color difference between the switch and cover plate which for me is very noticeable. So I was super excited to give these a try and the reviews are right. They are cheaper and match Leviton so well. Would recommend these over the Leviton plates.

Just recently moved into a newer house. All the switches and recepticals were that creamy almond color. Spruced things up a bit by instaling these BESTTEN wall outlets as well as the paddle switches for the lights. NUMBE ONE-> BE SURE TO TURN OFF YOUR BREAKER TO THE SWITCH/OUTLET YOU WILL BE WORKING ON! Safety is not second here. Most of the wiring in the house was 14 AWG so the wires just slid into the back! Others were the 12 AWG and needed to be screwed to the side mount screws. Also since the attaching screws are under the faceplate, the look is so clean. Makes the house look super modern now!

Recommended

Pretty decent. I got these since I installed a couple of Kasa smart switches which have a similar squared off cover, and I wanted a cover for the bathroom switches to match. Easy enough to put on but scary to try to pry off. The cover bends quite a bit before the tabs let it go, so you need a long, thin plastic pry tool to take these off slowly and safely. The light switches themselves are a bit more inset than I would like, but I don't think you can make adjustments for this. A bit annoying since there are a couple of reset buttons on the bottom of the smart switches that I'll need a tool to access. Overall, does improve the aesthetic.

Work as they should but looks great.. no screws

These are amazing and what an update it gave to my home. Love how they look.

Installation facile, et ça fait un beau fini. Je le recommande pour l'esthétique.

I love the finish and it looks really good