QWORK Heavy Duty Pipe Cutter, 1/8-inch to 2-inch Steel Pipe Cutter

Made from cast iron and steel, No plastic or aluminum. Solid as a rock so no spiral cuts like light weight cutters made from aluminum or plastic. Even includes an extra cutter. Of course, it's not tiny and takes about a 20" circle to swing it. Value for the $ is very high.

I had a quick project that required a pipe cutter. It required that I cut four 1” stainless pipes with reasonable precision. The QWORK Heavy Duty Pipe Cutter made quick work of the task with nice clean cuts. This is your basic pipe cutter. Place the device around the pipe you want to cut and slowly increase pressure each time you make a full revolution around the pipe. I suspect that people that have difficulty with the tool are trying to cut too quickly. If you really crank down too hard for the first couple of revolutions you risk squeezing the pipe out of round or spiraling out of the groove that will become your cut. My experience was perfect. I increased the pressure on the pipe a bit with each turn and the pipe quickly cut with a nice even lip. The cutter came with a spare cutting wheel that looks easy to replace when the time comes. It seems like a sturdy tool that can withstand frequent use. That said, you can spend 10 times more on a professional level pipe cutter. I highly recommend this product for the weekend DIY type.

It works but it is not professional, it is not known how long it will work

This tool worked so well!! We had a metal rolling shelf that was too tall for the closet we wanted to put it in. This tool only took about 20 mins to get 4 pieces cut and assembled. The cutting itself took less than a minute. The shelving poles already had notches that I followed to make the cut so maybe a bit trickier without that I don't know. But for us it work 10x better than I expected.

Guide wheels are crooked and doesn't even cut a straight line. Works more like a pipe threader. Quality is poor. Can't believe I paid $39 for this piece of junk.

I needed to cut several sections of 1-1/2" rigid steel conduit for a workshop project and wanted a cleaner, more precise alternative to an abrasive chop saw. From the first rotation, I was impressed. After clamping the conduit in my vise, I set the cutter in place and applied light tension with the large adjustment knob. The rollers are well-machined and kept the tool perfectly square on the pipe as I began to turn it. I progressively tightened the knob about a quarter-turn with each full rotation, and the hardened cutting wheel bit into the steel with zero skipping or chattering. The T-handle provides excellent leverage, making the process smooth and controlled rather than a test of brute strength. The most critical finding was the perfect tracking of the cutting wheel. On cheaper cutters, I've seen the wheel "walk" or spiral down the pipe, resulting in a ruined cut. This cutter stayed in its initial groove flawlessly for the entire process, producing a clean, straight cut that snapped off neatly. The resulting edge required only minimal reaming to remove the small interior burr, making it immediately ready for fittings.

It worked for my lil job but this product is made of pretty poor quality. Was kinda expecting a lil more out of it.

I had to think about my opinion on this cutter because, in the end, they refunded the money on this item. The cutter I received had casting issues and shouldn't have left the factory. I returned mine.

C'est un bonne appareil , le rapport qualité /prix est bon . Attention : il est plus gros qu'on ne le pense . Pour couper certains tuyaux , vous avez intérêt à avoir de bons avant bras . Soyez prudent si vous le commandez , il y a une petite roue de rechange pour couper qui n'est pas scotcher , et lorsque l'on ouvre le paquet elle tombe .

Worked great. Needed to cut about 7" off a bicycle service stand, inner and outer pipes. Just slightly tighten the cutter wheel as you rotate the unit a few times around the pipe. Did need to file the inside of the pipe smooth afterwards.

Top, j’ai découpé proprement des tubes d’acier bruts de 40mm de diamètre avec une épaisseur de 1,5mm. J’ai dû faire 6-8 tours et puis ca coupe, nickel et ligne bien droite ! Plus qu’à poncer pour rendre tout ca propre !

Ho fatto questo acquisto perché dovevo tagliare i tubi del nuovo sifone e volevo fare un lavoro fatto con la massima precisione. Ho quindi cercato su Amazon cosa ci fosse come attrezzatura e non ho trovato un granché come recensioni. Ho deciso senza ne arte né parte di acquistare questo prodotto. Una volta che mi è stato consegnato in n un pacco anonimo, l'ho scartato perché mi serviva immediatamente. Beh non avrei mai immaginato che fosse così grande Alle mani da il senso di robustezza, viene fornito anche di una lama di ricambio e visto i costi del ricambio è molto vantaggioso.lo scrivo perché non ho trovato questa informazione da nessuna parte. Ho utilizzato il prodotto con estrema facilità e ottimi risultati l, anche perché non avevo mai utilizzato uno strumento di questo tipo. quindi la valutazione finale è che ho fatto un ottimo acquisto

Para conducir los cortes son muy fizados y gruesos