0380 Bleeder Kit

This is a great product and makes bleeding brakes a one person job.Works as intended and you can pressure bleed with or with out brake fluid in the pressure tank.Only improvement I could suggest is to lable top of brake caps with vehicle it is for.On that same note the use of resealable plastic bags that the caps come in would be great as it does have the name of vehical it’s meant for but they are not resealableVery glad I got this genius toolI only had to pump up tank once to bleed entire mazda speed brakes with complete new Dot 4 brake fluid.

Received this product on March 1st used it once. I went to use it again (9/5/17) I noticed the box was damp. I tried to use the product and found they had used materials not compatible with brake fluid. The hose had rotted and was leaking on both ends and the o-ring on one of the adapters that I had used had swollen and no longer fit the master cylinder. Also the tank was leaking near the hose attachment point making it useless. Pure garbage especially considering the cost. Save you money buy elsewhere.

Product itself works as designed flawlessly. Only issues is right of the box first use the pressure Guage isn't working properly. When empty tank shows 15psi. Will have to pull it off and find one that works.Update: seller is sending new Guage to replace faulty one.

Once you use a power bleeder like this, you'll never go back to the hand suction pump method (or pumping the brakes). You should always fully replace all of your brake fluid every several years (see your owners manual), since the fluid slowly absorbs moisture over time (even if you don't open your brake fluid reservoir), and can slowly add a little sponginess to the brakes. (Probably more noticeable on motorcycles, but cars/trucks too if you are particularly observant.) A power bleeder like this, with a large reservoir, is the only sane way to do it, and to be sure you get all the air out the first time. I did my sportbike, truck and wife's car (all 2003/2004 vehicles), and noticed a significant improvement in brake feel on all.The only down side is cleaning it out when done is a bit of a hassle... you don't want to store fluid in it or the (very long) line, as there is too much air space, and the fluid will absorb too much moisture just sitting... unless you are a full time mechanic and do brake jobs every week.

Good selection of accessories to fit a wide variety of master cylinders. Makes the job simple with one person

I own an automotive and motorsports service business. We've always gotten by with one of four pneumatic vacuum bleeders or, in tough spots like upside-down, rear motorcycle calipers or hydraulic clutch setups, reverse bleeding with syringes.Got jammed up recently on an older Volvo with fixed, 4-piston calipers and no less than 10 separate bleed screws that kicked our butts worse than linked ABS VFR brakes. Hands up in resignation, I researched power bleeder options and settled on this manual pump model.It arrived two days later. Before I got there, the crew tore it open and had at it, fully bled with excellent pedal in about 10 minutes flat!It's our go-to brake and clutch bleeding tool now, saving time and maximizing revenue flow. Just in time and one-man efficiency alone, it paid for itself about the 6th use.Elegant in its simplicity and comforting in its durability, I fully recommend this unit to anyone on a budget that cannot swing the pricey pneumatic units.5 stars.

FLAT PLATE ADAPTER A LITTLE SMALL, AND JUST SEALS THE RESIVOR, BUT STILL WORKED. ALL OTHERS WORK WELL. GOOD PRODUCT

the best way to bleed your brakes by yourself