Happybuy Wire Stripping Machine DA 0.06 inch -1.5 inch,Wire Stripper Machine 11 Channels 10 Blades, Automatic Wire Stripping Tool with Manual Hand Cranked Industrial for Recycling Copper Wire

Excellent large volume stripper..Strips 2/0 and larger wire to smaller 14 gauge and romex. Strips Solid and stranded wire. Also strips knob and tube wiring. I was even able to strip as small as 2” pieces of insulated wire. Easy to first remove romex jacket. Unravel wires, then run single wires through stripper. No issues so far after 24 hours of use. Easy to adjust. Emergency stop works fine. Arrived in a wooden box with foam in excellent condition. Saved hours and hours of manual stripping. Manual stripping is for your time on the job. Not cashing in your copper.

Stripped 600s for two days and this thing never blinked an eye. Also strips smaller wire just as good. Easy to use and setup, don't need a manual just adjust depth of blade and send it.

A perfect machine for start a new friendly environmental hobby. So easy to use and relaxing. It's a little bit noisy especially if you set it in a small room, better to use in an open space.

This machine is aweomse. I found if you run the wire through twice than the copper almost falls out of the plastic casing making it 10x easier and less painful to strip the wires. I would deff. recommend and would 100% buy this machine again.

For the price you can’t beat this. We absolutely put this thing through a torture test. Had enough scrap that we knew it’d pay for itself with the one haul so we were brutal to it. Had some 750’s with medium voltage insulation and the thing was working like a tank to the very last piece. For the price this things unreal

Something must’ve been wrong with it, as it would make noise only at certain positions of the blade, and a liud noise at that. Had to return it.

This thing stripped hundreds and hundreds of feet of wire for me of all sizes with ease.

I'm happy with the wire stripper itself but I did not receive an owner's manual and I tried to contact them and they are not helping me with getting me an owner's manual