Yocaher Drop Down Longboard Complete Cruiser 41.25" x 10" w/Premium Black Grip Tape, Heavy Duty Aluminum Alloy Truck, 71mm Longboard Wheels, and ABEC-9 Bearings

Nice grip tape, good wheels..even decent bearings. Very giftable. Came well packaged. Very happy with the quality and overall looks.

I have been skateboarding from 12 to 17 and then I gave that up for snowboarding and this season will be the 25th season. I bought this longboard because I wanted to get into it after seeing the kids around town flying around on these incredibly cool boards. Even for someone as experienced as I am on board, I believe this was a perfect purchase because I didn't spend $200 or more without knowing that I really want to see this through. I gave four stars because of the obvious the bearings and bushings that are super low quality ( your basically just paying for the wood anyway) . However for a mere $15 you can upgrade to name brand bushings and Bones Reds bearings which is what I just did today. Holy crap, speed wise its a night and day difference . I want to get into bigger Hills and maybe start sliding but at my age I am perfectly fine I'm just carving up the streets for now. Before you go buying a brand name board which is what I normally do. I am one of those people who will spend the extra $100 for the name because I believe you get what you pay for. But in some cases like this it make sense to go mid level before dropping twice the $$. I'm going to keep this one until I run into the ground because the board construction is very solid and I love the shape. The trucks are okay too and will do the job and until they break. I'm not going to complain. Again I recommend buying bones Reds bearings and a medium skateboard bushings when you buy this setup now. IF you wait your only impeding on learning because they really are such a big difference. You will not be disappointed in fact you'll be totally stoked. IN every other review it says that you will want to replace the bearings and bushings and bones are the most inexpensive while being an all around industry standard. Good luck with whatever choice you make and ride on.

I’m learning how to ride a longboard as a middle-age right of passage. Actually, I don’t want to keep my bike in my car as a skateboard is much more compact, but I digress...This is a great beginner board and it’s totally on you to take it to the next level, it needs some tweaks!First, put some Mach 1 78’s on this thing to increase your speed and clearance. SPEED IS SAFETY, the faster your board THE EASIER IT STAYS UNDER YOUR FEET. With new wheels come new bearings, spend the $20 for a set of Bones bearings.I just doubled the cost of your board. Adjust accordingly.Next, you’ll need to turn. It still won’t carve 100% until you adjust the trucks and bushings, some cone bushings $5-$10 will help, but if that’s not enough you may need some trucks with more carve in them. I just loosened the nut on mine as much as I can safely go and I still can’t pull a u-turn on a standard neighborhood street, you’ll want to look up an upgrade that will help you lean into the turns. This is very important as there’s no kick on this thing and it’ll take a while before you’re comfortable with a slide. Before any of that happens, you gotta carve the turns.I’m using mine to commute a couple miles through a midtown neighborhood with gentle hills and light traffic. I’ve been riding for two months and I’m still watching YT videos and dialing it in.In time, this will be one of the best and most versatile boards on the market, but it needs to be tuned for what your needs are and your current skill level!Hope that helps!

Great board. Highly recommend

Disappointed is all scratches up right out of the box , no padding around it and the box it came in was a bit excessive..

I've had this board for a couple of months now and feel I can give a better opinion on the board, having spent some time with it.I should preface this review that I'm a male, 5'9" in height and weigh 260 pounds. This board is an excellent beginner board; it took me roughly 2 days to feel confident with my stance and balance with the board. I was cruising the street and sidewalks within the week. This board has zero flex, but it's supposed to be that way.For pushing and general cruising, this board needs work. I spent more money tweaking the board to my satisfaction for pushing and cruising than the overall cost of the board. First and foremost, the wheel bearings need to be replaced (Bones Reds) as well as the truck bushings; the bushings affect your "carve" and stability (> 90a durometer). The stock wheels are not great, but any lower (65 mm - 70 mm) sized wheels (78 - 86a durometer) give a significantly better ride (less pushing).The board comes with risers between trucks and board to prevent wheelbite. These risers can be cut in half or replaced with 1/4" shock absorbers to give more stability.In summary, if you intend to push and cruise this board stock, and be over 250 pounds, be prepared for a workout. My problems may not be present for someone < 200 pounds.I hope my review helps you in your decision.

I am a freshman in college now and I wanted something to get to class with. I could have gotten a bike, but I wanted to learn something new as well. I learned the basics on my friends board and then purchased this one. The board itself was in an OK condition upon acquisition. I'm not sure why, but it had a few scuff marks on the grip tape; could have been from shipping? The bearings on it were absolutely terrible, but I had bought some Yellow Jacket Stripes to put on. While putting on the bearings, I found mine was missing a speed ring as well. I'm very pleased with the quality and performance of the board, but it was sold almost as if it was renewed, which is not specified in the title of the product. Anyway, it's very easy to learn to use, and supports 230 lbs with no problems. Just get bearings for it.

Was great except the grip tape was already bubbled an cracked when I went to fix it.

Awesome Board, First time longboard and easy to ride!

the good: this drop down deck is 9ply and thicker than the Atom 9 ply drop through I have, the Yocaher doesn't flex under my '6"3 225lbs and is great for a 49yr old beginner that doesn't quite have the balance or skill to push off on a top mount deck. The grip is thick good quality and the trucks and bushing and wheels all appear to be good quality.the bad: the bearings are noisy and binding and have no spacers, its an easy swap out. The grip tape was bubbled up on the deck contours, another easy fix just poke with a pin and press it down.the worst: the box it came in might as well have been tissue paper, it was busted open, the deck had broke through and one end of deck was all mashed up and only one end of deck is wrapped in bubble wrap for some protection. I put bump guards on both ends regardless to minimize any damage I might inflict but seriously they should pack this better.overall i'm pleased with this product but if it had arrived with any more damage than it did i would be sending it back

Took about a week of rides to fully break in, but it's a great starter / intermediate board! The wheel bearings are pretty good so you do roll for a decent distance before needing to push again, great at maintaining your current speed as well. I've had it for about 8 months now and don't have any complaints, so this board definitely met my expectations.

It could use replacement bushings(probably something softer), and better bearings, but aside from that I'm absolutely thrilled with this board! The deck is much higher quality than I had expected, and the wheels are much nicer than the ones shown in the preview image. It can't quite keep up with my other board in terms of carving and sharper turns, but it's a lot more stable and for the price I'm really impressed. I ended up gifting it to my girlfriend as a starter board and she's been out with me regularly ever since with minimal issues. Definitely recommending this purchase! Just count on picking up some new bearings and bushings in the first couple months, and you'll be golden!

Estoy muy decepcionada por el producto ya que fue un regalo de cumpleaños para mi hijo, la tuve guarda para su cumple y en menos de una semana de uso la tabla se despegó y cada que la usa mi hijo pareciera que fuera a Quebrarse, es una pena fuera de tan mala calidad, y lleva mas tiempo sin usarse y guardada. Ojala que el provedor le invirtiera en sus materias y en vender productos de calidad.