Lutron Caseta Smart Lighting Auto On/Off Motion Sensor, Lutron Motion Sensor for Dimmers, Switches, and Fan Controls, No Wires Required, PD-OSENS-WH, White

Wow. I just don't know what all these reviews are on about. Look, I get that if you expect something to work one way and it doesn't, you're going to be upset. And in that way the negative 1-3 star reviews here are valid. I'm here to tell you why I think this is a 5 star product. I'm a Homekit user. When I built my system up from the ashes of a prior ZWave setup, I made a big decision: anywhere I had a lamp, I'd use a Hue bulb. Anywhere I had a switch, I would use a Lutron Caseta switch. I don't have any need/desire for color in my lights, so this worked perfectly for me. My primary goal was to automate every single light in my house and do it as cheaply as possible. It's been 3 years now and there's one thing I'm certain of: Caseta products are the best home automation products ever made. I have NOT ONCE had a problem with my Caseta products, and the Hue stuff gives me constant headaches. The only motion sensors I have in my house are in my laundry room and hall closet. They're Hue sensors controlling Hue bulbs in the Hue app (Homekit is completely incapable of programming occupancy correctly - the biggest oversight in a platform full of problems). As I mentioned, I have frequent problems with all the Hue products, so I was THRILLED when Lutron announced their Caseta motion sensor. I think I literally jumped up and down, I was so excited. Imagine my disappointment when I checked out the reviews on Amazon and Reddit! Everyone hated it! I couldn't believe it! But, as I mentioned, I consider Caseta products to be the best ever, so I took a chance on the sensor...and I'm glad I did. Look, I'm using this thing in a room where I actually don't want to use a light switch. I'm using it in my garage workshop, and I've had it installed and operating for 2 weeks now. I can tell you that in my setup it has been nothing short of flawless. It takes less than a second for the lights to turn on when I enter the room. Less than if I'd used a switch. I have the sensor set to pick up minor movement and I have it set for a 5 minute timer. I have not ONCE had the lights turn out on me while I was in my garage. And that's pretty important when I'm using a freaking table saw. Even when I'm on the opposite side of the room standing very still in front of my wall-mounted computer, the sensor is able to pick up enough motion to keep the lights on. The entire time I've been writing this review, I've been standing 15-18 feet from the sensor with my back turned to it, and my slight movements have been enough for it to catch. On the flip side, I know that the five minute time-out is working perfectly. See, we have a fridge and freezer in our garage, so we regularly come out here to get something. I've had plenty of times where I've come back to the garage anywhere from 7-15 minutes later and the lights were off like they should be. Again, I'm not doubting the people who don't like this sensor. I'm assuming that if I walked into the room, the lights went on, then I walked out of the room and turned them off from a switch and then walked back in a minute later, the sensor wouldn't turn the lights on. I can see that complaint and I think it's reasonable. I just wanted to offer this counterpoint to argue that in my situation it's far and away the best possible option. SUMMARY: If you have a place in your home or business that you only want controlled by motion and not switches, this is the sensor for you.

I don’t usually write reviews, but this product nailed a tricky setup. Our long basement storage area has 3-way switches at both ends—one inside and one outside the space. I wanted motion-activated lights, which can be tricky with 3-way wiring. The long space and two entries eliminates using switch mounted motion sensors. The Claro Smart Light Switch and sensor made it simple. Wiring instructions were crystal clear. I swapped the inside switch, added the jumper to the outside "dumb" switch, paired the sensor with a quick six-second press each, and it just worked—no app needed. I placed the sensor where it could see both doors, tested it, and it detected motion perfectly. Set the timeout for one minute, and the lights behave exactly as I wanted. If you need motion-activated lighting with a sensor away from the switch, this is it. Simple, effective, and reliable. Pros: Works with 3-way switches Sensor can be placed remotely from the switch Accurate motion detection at longer distances Easy setup—no app required Clear wiring instructions Cons: Limited if you want full smart-home automation with multiple Claro devices If you want the second switch to act like a normal switch you'll need to replace it as well with the Claro Accessory Switch

When I read the press releases from CES 2020 about this product, I was exciting to add this to my Lutron Caseta setup at home. Before I purchased the Occupancy Sensor, I had a Lutron switch that I would use to remotely control my back patio lights. With the Occupancy Sensor, I could now have the patio lights come on when there was motion detected. The installation was a breeze. Adding the Motion Sensor was just as easy as adding any of the other Lutron Caseta devices that I have. What I noticed is that on the back of the Occupancy Sensor unit are a number of LED's and buttons for various modes. How these are set/changed, I did not see any directions on the included paper instructions. The instruction on how to program these settings are found in the Lutron app under the "Edit Device" -> "Sensor Settings Instructions" that is listed at the bottom once I've selected the Occupancy Sensor icon. It seems that since the default settings are most commonly used, Lutron did not include the directions on the paper copy. After placing this in my backyard, moving around in its field of view would turn on my lights. Since I set my Timeout value to 5 minutes, the lights would turn off after 5 minutes. It was easy to install and works great! Here are some things that I wish I was able to do with the Occupancy Sensor. 1. Place in a wet (outdoor) location. (i.e. Have an IP65 (or greater) rating) The Occupancy Sensor does not appear to be water resistant. There are many holes in the back of the case (LED lights, buttons, and (what looks to be) test points). Having some way to make this IP65 would be nice; especially since I currently have this mounted outdoors. Even an IP65 case that I could place this unit into would be nice. 2. Be able to disable the Occupancy Sensor based on a scheduled time. When I came out in the morning (when the sun was out) and walked into the field of view of the Occupancy Sensor, the lights came on. I'm guessing that since there is no light sensor, the Occupancy Sensor is always active. It would be great if I could set a schedule for the Occupancy Sensor to be (for example) active at sunset and in-active at sunrise

Like all Lutron Caseta switches and accessories , they light up my life—literally and emotionally. My house is basically a disco of reliability. I’ve got more of their switches than friends at this point, and not one of them has ghosted me… or flickered.

We got this to go with our home network of Smarthings etc. We’ve tried other sensors but they never worked properly. This one works great. We’ve programmed it for 15 min. and off from late evening til 7 a.m. You can still use the wall switch, but if you turn it off by the switch it takes 15 minutes to automatically come on again - but you can still use the switch to turn it on…so not a big problem.

Can use the motion sensor to operate any Lutron modules or trigger a “scene”. This is the simplest most idiot proof smart home system available since x10 went defunct, IMO.

I use this motion sensor to turn the smart lights on whenever someone enters the bedroom. While it works great 95% of the time, sometimes (5% of the time maybe) in the middle of the night, when the room is dark it doesn't detect a person until they get VERY close to the sensor. I haven't been able to figure out any pattern or reason why it does this, and it's very rare, but it does happen. Other than that, this sensor works fantastic for its purpose.

Works great. Thought there might be some concerns. But has worked great from day one and two months later no issues