Cen-Tec Systems 94709 Quick Click 16 Ft. Hose for Home and Shop Vacuums with Expanded Multi-Brand Power Tool Adapter Set for Dust Collection

LONG STORY SHORT:Great dust collection solution for your average, at-home wood shop. I'm a hobbyist and DIYer, so a commercial dust collection system would be major overkill, but this system is wonderful for keeping the dust manageable in my garage/woodshop. The quick clip system and multiple adapters make it super easy to switch from one tool to the next, and keep the power tools runnin. I've got adapters on my DeWALT Miter saw, my battery powered Circular saw, and my batter powered Sander. Just take the vacuum hose from one, and clip it to the next.PROS:-Quick Clip system is awesome, so you're not shoving a rubber connector on to every tool, just unclip, and re-clip into the next one.-Hose connector is designed to allow the hose to spin freely, so the hose isn't twisting as you change angles (most noticeable on the sander)-Long 16 foot hose makes it easy to leave your shop vac relatively in one place, and be able to reach multiple tools.-Air relief valve, and adjustment collar on each adapter. Prevents getting stuck on a tool.-Super easy to connect and disconnect.CONS:-Not really a con, but I wish they had sets that had more adapters for a specific type of tool line. For example, maybe you could get a 16ft hose with a "Dewalt style" adapter set. or "Milwaukee style" adapter set that works with most of their tools. I have a couple adapters that I don't have uses for at the moment.CONCLUSION:Buy it. It's reasonably priced, and REALLY helps cut down on the dust you kick up while working in your garage wood shop. **Shop Vac not included.

I connected the 16' hose to a 2-1/2" port on my cyclone dust separator and then every power tool in my wood workshop. What I found using an anemometer to measure air flow vs a hose of the same size that came with my shop vac was a 10% increase in flow. Wow. The locking system to the included adaptors is great. It's really quick-connect/dis-connect and stays connected. The included hose ends adaptors cover every tool in my shop. The hose itself is very flexible and will not kink. This hose is well worth the investment. Great job Cen-Tec.

Has all the adaptors you'd want. Fits all my shop tools, but, a little pricey for what you get.

I wanted a direct way to hook up my Makita orbital sander to my shop vac, and this hose with attachments works great! It comes with several accessories and thankfully one of them sticks onto the dust port of my sander fairly well. It took me a bit to figure out how I could attach the other end to my shop vac (the included attachment is TOO SMALL for the 2.5” opening on my vac), but I found that if I reversed the brush tool on my vac I could stick this hose with attachment into the brush. There is also an attachment that fits my belt sander. The hose is long, durable and pretty flexible, so it’s easy to move around and I can hold it in one hand while sanding with the other if needed. The quick connect coupling is very handy and allows me to unclip so I can use the hose for general clean up. So far it’s been a dream — using pads from 60 to 220 grit are essentially dust free sanding.

This is a great kit for the home owner /Diyer who dosen't have the room or need for a dedicated dust collection system. This is just what I was looking for to turn my shop vac into a dust collector. I have the Ridgid 11 gallon smart cart shop vac and this kit fits and works great with it. I just disconnect the factory ridgid shop vac hose and connect Cen-Tec hose. The fixed connector on one end of the hose fits into the shop vac port perfectly. The other end of the hose has a quick connect fitting that allows you to connect one of the different sized adapters. Now I can use my shop vac as a dust collector for my DeWalt 10" contractor table saw, my 12" miter saw and all my other hand tools that have a dust extraction port. The adaptors are made from a flexible rubber that stretch slightly to allow you to tightly fit them over the port on your tool. I like that the hose is a smaller diameter than my shop vac hose. The smaller diameter produces a very strong suction at the tool end. Plus the inside of the hose is smooth so your debris and dust will not get stuck in the hose like they do on a regular ribbed hose. I am glad I purchased this kit. It works great for my situation.

I cannot believe I've waited this long to buy this attachment. It's AWESOME!!! I'm using it to sand walls and to sand sheet rock compound. It fits perfectly on my Dewalt orbital sander. It keeps the sandpaper clean which saves replacing the sandpaper constantly. I used the many adapters to attach different vacuum attachments to suck up the sanding compound while repairing sheet rock. You do have to listen to the shop vac the whole time but I wear ear muffs so it's not too bad. They send lots of adapters to choice from. I can't wait to use it this summer when sanding wood. It's a game changer how clean you feel when you're done sanding. Saves a lot of time cleaning up. A MUST HAVE!!

I was looking for a flexible and adaptable hose solution for my dust collection setup, and this kit delivered. My Ridgid Shop Vac is connected to a Dust Deputy and I wanted a flexible hose to connect to tools. The included connectors allowed me to seamlessly integrate it with my SawStop blade guard, Ryobi sliding miter saw, Festool sander, and Makita track saw – a huge time-saver! The adjustable airflow collar is a brilliant feature, especially when sanding, allowing me to fine-tune the suction. The hose is also remarkably flexible and feels very durable. For the price, this kit is an absolute steal and a must-have for any workshop