2Pin LED Strip Connector Kit for 8mm LED Light Strip

A simple instruction page would have been appreciated, but we got by. We used the T and L connectors. For some reason, these install "upside down" which means the little lids that clamp down to the wire are on the underside when they have adhered to a wall. Also, the "bite" these have on the LED tape is very small - about 1/8" - one LED strip pulled out when we were holding this up to tape to the wall. If the "throat" of the tape "channel" was twice the size - say 1/4", it would help to align and it could have a much bigger "bite" on the end of the LED tape to hold it better. All in all - an average product that could have been excellent with just a little more forethought into the design. The contact points that contact to the LED tape are minimal - if they were twice the size that would create a much more reliable connection too. For the price, these worked - but I would have gladly paid more for an improved design.

These could not be easier to use and function 100% for my project. I needed to use 3 wire sets, 7 90-degree angle and did not encounter any issues. Highly recommend for the 2 wire LED strips.

Maybe it was just me but I wasn't completely sure if I was buying the correct size connectors for the LED strips that I had, but it did end up being correct. My LED strips were 8mm wide, the metal pins being about 5mm apart. These '8mm' connectors fit just right. I do wish there were more of the 'T' connectors and more corner connectors. There are a LOT of wired connections which I will use in the future but really it's those 90-degree angles that LED strips don't like to make that I needed the connectors for. I'll probably look for another set that offers more of these specialty connectors but as for this set, the quality is good and I received exactly what is in the listing photo.

These were the perfect solution for my installation with 90 degree corners and a requirement to extend the Led strip utilizing the end connector and associated wires. This product worked exceptionally well and installation was straight forward.

Good to connect multiple light strips together.

Used for putting LEDs in closet. I have never had such a painful experience putting on lights. The connectors don’t even pass a current half the time and to be honest would never do this again

Got these to go with some tape lights bought locally--12v, 8mm wide, seemed like a match. Works great! only slightly tricky bit is getting the edges inserted under the guides in the connectors. Depending on your tapes, YMMV, but this works great for me.

Solid connection. Easy to use. The wire jackets are annoying to strip though. Even with a wire stripper. I don't usually have that much problem. I had trouble making contact with the DC connector with the tiny leads they had. Everything else was great. I liked that the corner connectors have a little flex to them.

El material es bueno con referencia al costo, su tamaño y facilidad de uso hace que el trabajo sea más detallado y rápido. Trabajar con el soluciono el problema de unir varias líneas en una sola continuidad.

Nice product