Siraya Tech Build 3D Printer Low Shrink Resin, Smoky Black, 1kg

This resin is fantastic for printing highly detailed parts, as well as smooth, simple forms. It adheres to the printer bed well, and separates quite easily once the print is done. Highly recommend.

This is hands down the best resin that I have used. It works great for printing out small and delicate details and it's strong enough to use for functional prints. While so far, all of Siraya Tech's resins have been great, this one is my favorite and the one that I keep coming back to over and over. It was easy to get it dialed in starting off with their recommended settings with just a few tweaks. Printing everything in these pics using a Elegoo Mars 2 with great results. This resin is also a little forgiving of the temperature. I've printed at 20ºC without issue. You can also mix this with Siraya Tech Tenacious (90% Build and 10% Tenacious by weight in grams) to make your models a little more drop proof if needed. As long as they keep making this resin, I'm going to keep buying it!

Tried with default settings, poured straight into the vat in a 78* house, didn't work worth a darn. Tried again, warmed the bottle up for 30min in a sinkful of hot water and changed my print settings to match the spreadsheet on their webpage, worked beautifully! Printing on an elegoo Saturn, the smell is a bit strong, kinda like a salon doing perms. Have yet to test the print, but just carving away the supports with a pocket knife I can tell it's tough.

Excellent detail but it's a bit brittle. I mix in 15% tennacious and get much better mechanical properties with no loss of detail. It machines nicely for secondary cleanup. I use gun taps in my mill to tap threads down to 0-80 with no problems.

siraya tech resins have always worked very well for me. after i ran out of siraya tech fast resin i decided to give anycubic resin a try and it had alot of failures in printing and was very brittle. both the siraya tech fast resin and their build resin are far more durable. as you can see from the pictures i printed some functional parts for my longer lk4 pro fdm printer. the color adds a unique look when parts are thin as the resin is a dusky translucent. then the solid parts have a very nice glassy black quality to them. siraya tech list this resin as tapable and it certainly is. the various fan shrouds and air ducts i resin printed for my filament printer had to be drilled and tapped. and all went well. this resin has good toughness and overall strength as well. very good resin for models and functional parts. all resin prints shown were printed on my longer orange 10 at .05mm layers and a 10.5 second cure time per layer. 60 seconds on bottom layers. edit 1/12/2020; i have since added some models i printed of the mandolorian a hollow bust, and a full figurine. i have also printed with this resin an xbox series x battery cover for a friend and some functional parts for my reloading table. it is still my Go-to all around resin.

So far, the easiest to use resin with consistent results.

Figured I would try this resin for some bolt on detail pieces for an r/c project, since it is advertised as being tappable, which is a BIG deal for what I use it for. I can confirm this resin does accept threads very well, whether it be by using an actual tap (preferred) or a self-tapping screw. My first print (an engine bay for a 1/16 scale truck), using the same settings I use on almost all resins, turned out so well I just ordered a second bottle, because I know I'm going to be using this resin often. Very impressed. And as previously noted, the color is more of a blue/purple translucent, it gets darker the thicker the piece is. Most of my prints end up painted so that's not an issue for me, I'm more concerned with it's durability, which seams to be FAR better than standard resins. Thank you SirayaTech!

Quality of prints on my 3d Printer were dependent upon initial set-up and adjusting settings to get optimal/best results. I used cones of calibration and did around 5-6 initial test prints to tweak my settings to get the best results on my Elegoo Saturn S. I attached a screenshot of my settings that gave me optimal prints. One other note. When homing/z'ing my printer, I homed my printer to my FEP, meaning, I fill my vat with 1/4th full of resin, and then home my build plate, followed by setting my z-axis setting. So far, zero failed prints and amazing results. Resin matters. Hope this helps, and all the best.

0.5mm以下の精度を求めないなら こちらのレジンはとても良いと思います フィギュアとか色々印刷してますが 印刷しやすいと思います 結構ずさんな設定でも失敗しにくく 硬さや靭性もそこそこあって壊れにくい とても良いレジンです

Great resin, one of the best for engeneering parts.

Excellent resin burns out pretty good Ideal for small to medium size prints

Très facile à utiliser, rétraction quasi nulle, pas d'odeur ou alors j'ai le nez bouché ;-) très résistante, bref j'adore cette résine pour mes pièces techniques qui doivent subirent des pressions de plusieurs kilos.

Da quando uso siraya non sbaglio una stampa Ottima viscosità e a quel prezzo è top Da provare pure la trasparente Per me è n.1 nel settore resine