Build 3D Printer Resin High Resolution Non-Brittle Tappable Engineering Resin

siraya tech resins have always worked very well for me. after i ran out of siraya tech fast resin i decided to give anycubic resin a try and it had alot of failures in printing and was very brittle. both the siraya tech fast resin and their build resin are far more durable. as you can see from the pictures i printed some functional parts for my longer lk4 pro fdm printer. the color adds a unique look when parts are thin as the resin is a dusky translucent. then the solid parts have a very nice glassy black quality to them. siraya tech list this resin as tapable and it certainly is. the various fan shrouds and air ducts i resin printed for my filament printer had to be drilled and tapped. and all went well. this resin has good toughness and overall strength as well. very good resin for models and functional parts. all resin prints shown were printed on my longer orange 10 at .05mm layers and a 10.5 second cure time per layer. 60 seconds on bottom layers. edit 1/12/2020; i have since added some models i printed of the mandolorian a hollow bust, and a full figurine. i have also printed with this resin an xbox series x battery cover for a friend and some functional parts for my reloading table. it is still my Go-to all around resin.

This is hands down the best resin that I have used. It works great for printing out small and delicate details and it's strong enough to use for functional prints. While so far, all of Siraya Tech's resins have been great, this one is my favorite and the one that I keep coming back to over and over. It was easy to get it dialed in starting off with their recommended settings with just a few tweaks. Printing everything in these pics using a Elegoo Mars 2 with great results. This resin is also a little forgiving of the temperature. I've printed at 20ºC without issue. You can also mix this with Siraya Tech Tenacious (90% Build and 10% Tenacious by weight in grams) to make your models a little more drop proof if needed. As long as they keep making this resin, I'm going to keep buying it!

So far, the easiest to use resin with consistent results.

This prints super clean, honestly some of the best detail I've had. It has a hard, glossy finish, and while it is trappable and easy to drill without much chalkiness, it is prone to breaking. I mixed it with about 15% Siraya Tenacious and it was still too brittle for miniature handling - elongation maybe 8-10%. This is best for stationary parts that need to be a little hard, especially things with large cross sections, but not great for things like miniatures. Would probably be good for statues, as it prints and holds fine details VERY well. When printing, slow your lift speed. I found that it tends to tear itself apart/shear when printed at higher speeds. It holds overhangs and thin sections well during printing, but thin areas are very easy to break.

THIS STUFF IS THE BEES KNEES. This stuff barely wraps. Pro tip: in your CAD, shell and rib your parts (as opposed to printing solid blocks). That will reduce stress on the part and any warping if any. Pro tip 2: if you have lychee premium, use the project support function. It will outline your surfaces in supports and you will have even support for parts that need to be flat. Resin is viscous. Cleans easy, ~4sec layer per 75um layer. Depends on the surface area of your part too

I got my first ever resin printer and could not get a successful print to save my life. I re-leveled the bed god knows how many times, tried lubricating the FEP film, tried changing the number bottom layers and exposure times, and nothing worked. Finally I decided to switch resins and since I saw some good reviews about siraya tech resin I figured I'd give them a try. My very first print after switching resins was a success!! I had been at my wits end thinking I'd never get to use my resin printer and their resin saved my sanity. They've earned a customer for life and I can't wait to try out more of their resins!

This stuff is amazing. I was using Elegoo ABS Like 3.0 in grey and it printed small delicate details perfectly every time but was pretty brittle even on short drops. I printed the same parts with this Build resin and it has even sharper detail while being much stronger. It feels less flexible but I prefer a more rigid part anyways. If I need flexibility I might try blending some tenacious in but this is my new standard. The profile Siraya provided is perfect for my Saturn 2. The smell is also extremely minimal, at least compared to the Elegoo stuff.

Figured I would try this resin for some bolt on detail pieces for an r/c project, since it is advertised as being tappable, which is a BIG deal for what I use it for. I can confirm this resin does accept threads very well, whether it be by using an actual tap (preferred) or a self-tapping screw. My first print (an engine bay for a 1/16 scale truck), using the same settings I use on almost all resins, turned out so well I just ordered a second bottle, because I know I'm going to be using this resin often. Very impressed. And as previously noted, the color is more of a blue/purple translucent, it gets darker the thicker the piece is. Most of my prints end up painted so that's not an issue for me, I'm more concerned with it's durability, which seams to be FAR better than standard resins. Thank you SirayaTech!

価格、品質、出力のしやすさ、どれもとても良いです。 二次効果せずに1年以上適当に放置しててもクラック入りません。（水道の近くでよく濡れたりするところに出力しっぱなしのものを置いてたらクラック入りました。） タッピングも可能。m2.5、m3のタップを後から切りましたがネジ山が崩れません。

Great resin, one of the best for engeneering parts.

I needed a hard resin to print small-scale (max 15 mm diameter) gears: the Siraya Tech Build was recommended to me and it is _excellent_!

Da quando uso siraya non sbaglio una stampa Ottima viscosità e a quel prezzo è top Da provare pure la trasparente Per me è n.1 nel settore resine

QUALITY!