HUANUO Single Monitor Arm, Adjustable Desk Mount for 13-34 inch Screens, Holds 19.8lb, 22.44 inch Max Height, Full Motion Swivel Monitor Stand with VESA 75x75mm and 100x100mm Compatibility

I had just recently upgraded to a 34" monitor and was looking for away to add two peripheral monitors to the setup. I wanted a monitor mount that could fit to the side, but also above and behind the main monitor and this accomplished the results flawlessly. Having installed other monitor arms before, the ease of installation for this one was swift and easy. The arm is steady and strong and provides many different angles and movements. I highly recommend the product for its quality, easy setup, and functionality. This adjustable monitor arm should cover all your needs without worries.

I've developed some back issues and need to be able to work standing. I started looking at motorized sit/stand desks and stand desk converters, which all seemed over-priced, wobbles, and break after some time. This adjustable mount is a very economical alternative at $38. I'm 5'8", and it raises enough that I can view my monitor standing. My head is slightly tilted down, which is comfortable for me. If you're taller though, it may not work as well as a stand-up monitor. Actually, I would not recommend it for someone taller than myself if you're trying to achieve a stand-up solution. I bought a mouse/keyboard riser as well.The unit is very sturdy once it's all in place - raises and lowers easily after adjusting the tension. Only thing with the assembly is that the screw holes which attaches the clamp to the riser was not threaded on my copy. I'd recommended using one of the screws to thread each hole before assembling, for sanity sake. I added one zip tie, which probably is not necessary. The built-in cable management is awesome!Very happy with this unit. I'm curious to see how long the gas piston is going to last.

I only have had this for one day, I will update if anything changes.comes with different ways to mount and all seem very sturdy.build quality seems very good and does not shake and vibrate like other monitor arms I have had in the past, even though this one is half the price. That alone makes this worth buying. The decorative caps and cable routing covers are well thought out and make this product so good-looking on a clean desk.things to be aware of:This will not work properly for LG gaming monitors. the monitors are recessed in the back and will not allow proper mounting even with this VESA mount. The company has tried to compensate by including plastic spacers, but they are still too short (or the screws are too long). I had to fix this by adding washers and it works fine.This product has excellent cable management, but I am running an HDMI cable, webcam USB, monitor power cable, and Display port cable and they Did not fit! you will have to run cables along the outside of the arm. You can see this in my pic.Lastly, none of the adjustments on this are easy, they all use Allen wrench so adjusting tension, removing cables from the cable router, or changing the height on the pole can not be done quickly.because of the sturdiness, lack of vibrating when typing, and cable management I would easily recommend this monitor arm.

(I also own the dual-arm version of this mount and some of the review is the same since the products are very similar)This is a pretty good monitor arm mount. It is sturdy, went together fairly easily, and holds my monitors steady.This company has a version that is identical to this one except it has two mounting arms and the vertical post is slightly taller. The arms are compatible between them. Both are good products despite the Chinesium brand name.When you install this, I highly recommend releasing some tension on the gas cylinder in the arm *before* you take the velcro strap off that holds it tight during shipping.The C-clamp has a very wide range of thicknesses it can work with. Unless you have a freakishly thick desk, I doubt this will not fit.The only other issue I could see is if you have a melamine or MDF desk. These are commonly called "particleboard" and are the cheap stuff from IKEA or Office Max. Melamine and MDF are great because they are dimensionally stable: they do not warp based on temperature or humidity. However, their shorter wood grains mean they are not as strong as real (unprocessed) wood. I custom built my desk out of solid 3/4" (19mm) oak. I have two of these mounts and one of its big sisters with two arms. They are all torquing the wood since the clamps are off-center from the monitors, but there is no warping and everything is straight and level because oak is strong.I am not saying this product will not work with melamine or MDF. It will probably be fine. However, the desk may fail eventually. It might warp from the twisting force of the clamp. It might break - unlikely, but possible. This is just something to keep in mind, and is more of an issue due to the desk, not the monitor arm.

I have a big 32", heavy, LG monitor. It has an enormous stand, whose foot takes up my whole desk. This beast of a stand fit exactly into the mounting square on my monitor. It doesn't cover, or interfere with any of the connections on the back. My connections are adjacent to the mounting recess. The shipping weight of this monitor is 22.8lbs. Minus the packaging, that puts the monitor in the 19-20lb range (11kg).The setup was easy. It was maybe four steps. It is sturdy, and the gas spring has plenty of strength. The mount allows for adjustment in all directions: rotation, tilt, turn, and height. It will rotate vertically, for portrait orientation. It mounts either by edge clamp, or by drilling a small hole through the desk and bottom clamping. I chose edge clamping. It holds just fine, and sits discreetly off to one corner. I finally have my desktop back!Great item.Great stand.

Great product.Good design.Very well built.Easy to install.