🚀 Elevate Your Efficiency with Ease!
The Field Tuff Fast Change Hitch System is a robust and versatile solution designed for tractors, compatible with Category 1 and 2 hitches. Weighing 18.8 pounds, it features a durable powder-coated finish and includes all necessary hardware for quick and easy installation. The system allows for swift attachment and detachment of 3-point implements, ensuring enhanced stability and productivity during agricultural tasks.
Compatible with Vehicle Type | Tractor |
Finish Types | Powder Coated |
Material Type | Alloy Steel |
Item Weight | 18.8 Pounds |
B**C
Good quality. Works as advertised.
Installation was easy. I did buy some different bolts that were just a bit shorter. This helped when I was trying to keep the latch open with the loop retainer for disengagement of the implement. I have a kubota, other tractors may not need this modification. You will need a longer top linkage. I bought a 20 inch center segment top linkage and this works for all of my implements.
R**D
It really should be an adjustable "sleeve" that fits over if and adjustment bolts to better line it up straight
Overall it works as advertised but the side to side and up and down movement could use some work. It really should be an adjustable "sleeve" that fits over if and adjustment bolts to better line it up straight. But it does what I wanted it to and makes attaching implements easier.
D**N
Product quality
All of the tapped holes[threaded],I had to retap them total of 10 holes because you couldn't screw the bolts into them,very poor product we'll see how it works on the tractor!!!Hopefully better than the holes,very dissatisfied with Tuff Brothers product and delivery....2days late!!!!
N**N
Works ok on very small tractors.
It’s durable, you just need to use it in very small, garden type tractors. It works great on my small Kubota, but I didn’t like it on my 50hp Kubota.
T**K
These work great!
SO much easier to put attachments on the tractor with these. Considered Deere's quick hitch but not all implements are compatible so with these the only thing left to connect is the top link which is pretty easy. The only negative is they put the implement farther from the back of the tractor by a few inches so this affects the weight balance but worthwhile trade off.
M**K
Not Strong Enough Even for Light Work
I used these for about 4 hours with a box blade doing general road work. The bolts bent which allowed the quick hitch to flop around like a broken wrist. I adjusted several times only to end up in the same situation each time. Look closely at the picture these are only one sided so there is no inside support, other than the one inch bolt, to prevent these from moving around. Just not worth your time or money. Wish i could send these back but after only 4 hours they are beat to crap, the plastic (yes plastic) retention straps are gone as is most of the paint.
S**Y
I like this system a lot
This system makes it much easier to line up the pins on the implement. There is still some work to do on the ground but you don't have to be levering the implement into place. I like this system a lot. Not all my implements have the hitch pins at the same width.It is easy to adjust the width of the lift arms as needed.
J**E
Work Fine
These fast change hitches work fine but they do add to the length of the three-point lift arms. They were a little difficult to install on my Kubota tractor but they serve the purpose and they are lower priced than the competition.
J**.
Quick hitch
I did not use them yet but they seem to very good quality
N**D
Not a great design but it works!!
Update3 - After the winter they are still on my tractor and have held up! I use zip ties to hold the lever closed with the snow blade and attachments that might jump out otherwise.Update2 - I found the snow blade jumps out of these hitches a lot.Update - I’ve added a star because I’ve done brush cutting, discing, and now plowing with these quick hitches and so far they are holding up!I didn't realize that these quick hitches are not enclosed - meaning that the hitch only covers one side (the outside) of your three point arm. The inside is exposed. Long story short, all the sheer and other forces rest on the adjustment bolts. I can't see this holding up under a lot of regular implement stress (such as plowing and mowing).They are a knock-off of the Pat's Easy Change, but the Pat's are enclosed and use shims - much stronger than this design. I am anxious to try them out. I got them mounted but it was too dark for me to try them.Tips - use lots of loctite. Also use washers - this set doesn't come with any.
S**D
Five Stars
Je n'ai pu essayer très longtemps mais tout fonctionne bien pour l'instant
D**Y
Does not work on Category Two hitches
I bought this to put on a Montana (LS) with a cat2 hitch -- would not fit. Phoned BAC to make sure it was not just me. They asked me questions like did I use the bushings etc. and in the end said "well it may not fit "off brand" hitches. I looked at other tractors with cat lift arms and figured it would not work on those either. Amazon was terrific -- took it back no problem
D**D
Five Stars
So far so good. Easy install and great price!!
ترست بايلوت
منذ 3 أيام
منذ شهر