MAMX1

This thing is incredible, especially for the low price. You can have either 8 stereo or 8 mono inputs. The stereo inputs are a normal headphone out jack which is TRS. The other end I use a Y cable left & right into my the synths. With a single mono output I use a TS cable into the mixer. The sound comes out in the middle and not panned to one side. This mixer is solid, well built and extremely quiet. I heard a tiny bit of noise but found out I had the volume on both the input gain and headphone out at full volume. The noise was actually coming from my Korg Volca Drum Cannot comment on longevity of the unit but at the time of writing this I am extremely happy with my purchase.

This is a great little piece of kit with little being the key word! Measuring slightly over 6" long it packs in mixing capabilities for six inputs with virtually no noise at all (certainly my amp made more noise than the mixer added). I really appreciate the fantastic range of power options available as the unit is fed by a USB power lead. This means it can be operated by a battery pack (great for buskers) or directly from a USB plug or strip. It's stylish and sturdy metal box looks great on my desk next to the computer, but was bought to mix our band together before putting the signal into the main mixer desk and recorder. Easily balances the inputs added so that I could move from vocals, pedals, guitar, bass and ukulele without having to change the settings on the amplifier (in fact once the levels had been checked on this nifty little mixer, I could just use the volume control from the pickup whilst playing. It does 'boost' the signal making it a 'mixer-preamp' Not sure how the stereo input/output works at present as there is no facility to pan the inputs right or left. I suspect this means that they would operate as 'straight through' with any mono inputs pushed into the middle of the stereo signal - useful if you're running a stereo FX pedal through the system though. A small niggle is the lack of a clear level marker on the mixing knobs - easily rectified with a blob of Tipex (I've just discovered there is a mark but it has to catch the light). I can imagine that a multi-instrumentalist (or somebody with lots of keyboards) will love this little mixer as a "local" control before entering the mixing desk (this is the scenario shown in the instruction manual) As a lightweight, almost pocket sized mixer which adds very little or no noise, this will earn its place in my gig bag even if I'm just going to be using the two inputs for instrument and voice.

I bought this once as a sub-mixer for Korg Volcas into my main mixer. (Interestingly enough, it seems that even the "mono" Korg Volcas like the Bass and Keys actually have a stereo output that outputs the same signal to both channels. As such, and given that the Volca Drum/Sample/fm are true stereo, it's worth using stereo for all of them.) The first time I bought this, it was definitely creating noise almost akin to radio interference. It wasn't a ground loop, as I'd isolated that, everything was plugged in to the same place, and I tested carefully. No other ground loops in my setup, and I was getting the noise even with no input signals and low volume. I sent it back. Later, having looked around for almost every alternative, I re-read the reviews and decided to give it another chance. This time, I've got exactly how I wanted it. No noise. No problems. It must depend on which unit you get -- maybe the quality control isn't the best? Either way, for the unit itself, it's exactly what you'd want in a highly compact mixer. Six switchable mono/stereo inputs wieh independent volume controls and a main volume control. Sturdy metal construction and a comfortable feel on the pots. It feels well made, and looks very unobtrusive. If you're worried about noise, I'd suggest giving it a try and seeing how you do. I had definite noise on one, but the second is perfect. I haven't found any other mixer that can do this job with this form factor for any price. If you've got a few Volcas and are thinking maybe to have one or two more, this is exactly the right piece of kit. If you have a similar desire to mix together a few input sources together to a stereo output and don't care about panning, EQ, or effects, this is a great piece of kit and , incidentally, good value for money. Five stars would be my rating for the unit I have. I gave four stars just because I definitely had a bad unit before, and the reviews imply that other people have had them as well. I wish one of the bigger names would make a similar unit to give more confidence, but until then this is almost uniquely perfect for this particular niche.

I knew it was going to be compact but was surprised at just how tiny it is which is good. Build quality appears to be good especially considering the price (£30 at 18 10 23) The control knobs have a nice “drag” feel to them and feel sturdy. I purchased this mixer to enable a compact, quick and easy to set up and transport system which it enabled very well (see pics) Sound wise, at sensible input levels , the mixer is quiet with little audio quality lost. I found powering the mixer by USB lead from a laptop generated a bit of noise. Powering with the supplied cable and a 5v phone charger reduced the noise to virtually zero. Pleased with the purchase . ill report back after couple of months use.

The user manual is not very clear but the 8 channel mixer is excellent. You get 2 stereo outputs, each with 4 dedicated stereo inputs. Channels 1-4 and 5-8 each send to different outputs or all 8 can be sent to both outputs. This means you can use one of the outputs for headphones monitoring all 8 inputs or 2 separate devices can each have 4 stereo inputs. Extremely versatile. There's plenty of gain with low noise and whole thing is USB powered. I'm buying a second unit.

This is a low cost mixer unit with 8 stereo inputs and 2 stereo outputs. It is small and easy to transport, using standard 5V USB power supplies. It produces good sound with no noticeable hiss or hum. It is possible to which all inputs/outputs from stereo to mono and this provides a large range of options for connecting instruments and sound sources. Would recommend.

I purchased this to replace an old one. I had it is very small and compact and works brilliantly. i’ve got my wireless microphones plugged into it and my wireless guitar. Plus a lead to the amp plus one from my laptop all works good.

Knocked off a star as the first one was doa. Had to send it back. This could be an issue with QC standards in the manufacturing process. Ordered another the very same day and arrived in the mail the next. Hats off to Amazon for the quick delivery. 1. Build: Sturdy metal. Can presumably take a fall without breaking into two but unsure if its internals wont be rearranged if it did. Looks bigger in pictures but I was surprised that its really small and fits snugly under my synth stand and I can grab it with my hand and have a few fingers wrapped around too. Knobs are okay and looks like need breaking in but after the first time give way and become less tighter. 2. Architecture: As it says on the tin. I went for the 8ch variant. 8 mono which can be converted to 8 stereo channels with the push of a button (havent experimented yet but should be able to take 16 mono in stereo mode if receiving split signals, theoretically). Output A serves the top 4 channels. Output B serves the bottom 4 channels. The Mix button replicates the outputs across A and B. 3. Thoughts: Overall a good mixer. Low noise using the same usb cable as supplied and connected to my Sampler's USB port through a non powered hub. I am primarily using this to connect all my synths, ipad, zynthian into my sampler as it has only 2 inputs. 4. To consider if planning to use with synths: I planned on using this with my synths to play and record them stereophonically on my sampler. The guide mentions that you should use 1/4" TRS to TRS Male cables for stereo sound from your hardware to the mixer. But most of my synths have separate L and R channels with 1/4" outs and the stereo out (usually headphone) is a 1/8" mini port. So I went for bi directional Dual Mono TS to TRS cables (all 1/4" on both sides) to combine mono synth outputs into a stereo signal at the TRS end which would then go into my mixer. I haven't been able to make this work using this simple logic. IDK but maybe instead of preserving the stereo image at the mixer end the cables simply sum up the L and R of my synths. Also there is no documentation of whether or not the outputs are balanced mono unbalanced stereo and expect TRS jacks for conveying sound into outboard/external gear. Hope someone knows the answer and can help me out with this.