TOGGLER Toggle TB Residential Drywall Anchor, Polypropylene, Made in US, 3/8" to 1/2" Grip Range, for #6 to #14 Fastener Sizes (Pack of 100)

I've used scores of these over the years. They hold solid, easy to install and use. And they are reusable. Unlike pop-toggles, these don't have a part that drops behind the wall if you need to remove the screw. These are the poly- plastic wall anchor only. You need to purchase screws separately. I purchased number 8 screws to go with these on Amazon. Amazon's choice; #8 x 1-1/2" Phillips Pan Head Self Tapping Screw, Pan Head Sheet Metal Screws Wood Screws, Stainless Steel 304 (18-8), 100 Pack. Work perfectly together.

I think these are the best plastic anchors for heavy objects. It is slightly more work then a screw in anchor, but there is no risk of a faulty spinning anchor, and it holds much more weight.

I had to end up using a 3/8” drill bit instead of a 5/16” drill bit. I was unable to get them into the smaller hole. The product itself worked great.

I've used these for years and have had no call backs due to failure since I found these .I've installed many one sided toilet paper hangers and they really put the anchors to the test .I used to get call backs all the time with other fasteners but since I found these the problems have vanished.

I've had tons of anchors rip out but these are great and I swear by them! Make sure to get the screws to go with this and you're good to go.

Works better than most wall anchors. I seem to go through a progression of using regular wall anchors, stepping up a size when they fail, and then going with these. I'm thinking for tougher applications, I will go with these from the start. I would have been nice if they included a drill bit with the box.

Having been an electrician, installing commercial telephone, network, and A/V equipment for decades, I've tried many wall anchor products. You can't beat a standard plastic anchor for small loads; but when you need to mount something heavier, Togglers always work. If I am installing several Togglers, I'll use a cordless drill to make a small hole first, but in any case, I use a 5/16" flat blade screw driver to punch an "X" through the wall to create a square hole, then tap the folded Toggler in with a hammer. I do this to create a tighter fit vs. using a 5/16" drill. Please don't forget to use the included tool to expand the wings against the back of the drywall. If you loose or break the tool, just use a finishing nail, inserted head first, to expand the wings (just tap the pointed end with a hammer). Togglers also are a great repair for a failed light-duty drywall anchor, since the Toggler will usually require a larger hole than the previous anchor. The one thing which will almost guarantee failure of a Toggler is to not use the correct grip range. If you attempt to use a 5/8" to 3/4" Toggler in 3/8" to 1/2" drywall, the Toggler won't come out of the wall, but it will never pull things flush with the surface of the wall. Beyond that one limitation, Togglers are one of the best low-cost anchors made.

Works great. Like it should

This type of wall anchor was included in a fixture that I installed for someone and at first did not use them but later did after mine were too large and close together. Forced to try these I found they were strong and well made and held well. So much so I decided to buy a large quantity of them.

◼️使用感 らくらくボードアンカーで取り付けできない(内壁から躯体の隙間があまり無い)時の代用で使用しています。 壁内で開くタイプなので他のボードアンカーに比べたら頑丈さは折り紙付きです。 施工もしやすくとても信用のできる素晴らしい商品です。 あとコスパがいいですね。

Best type of anchors i tried yet.

取り付け易さ、強度が最高。 当分の間、トグラーのお世話になります。

These work well. The pin provided to push the wings outward should be metal, not plastic. Sometimes the wings are hard to push out.