Question 1

What does p and m mean? If Have 3 dc fans wired in parallel, which ports would be appropriate to install the wires into. And where to install power?

Accepted Answer

Pwm stands for pulse width modulation.  It's a way to take the available power from the battery and mange the power delivery to the device.  Instead of the battery discharging at 100% rate, the power is being sent out in on/off pulses.  This reduces the battery drain.  The frequency of the pulses is selected by the user when turning the control knob.  Some devices will work well with this (dc electric motors with this unit) and others may not.  The benefits of this are: (1) Battery efficiency - This scheme is commonly used for motors powered by batteries to achieve significant improvements in battery life.  I use mine (50 amp version) to run my older trolling motor.  My batteries can last even double the amount of time by dialing back the knob so that I'm sending out a smaller percentage of the power than 100%.  So, for example, if I chose to have the control set to 40% of max I would achieve a significant improvement in battery life.  This also means that the motor would run slower.  There is a trade off in performance, but it heavily favors battery efficiency.  The way I use it, is with a voltage meter readout to observe it's performance.  I've been able to deduce that the most efficient gear to use on my trolling motor is the fastest gear.  Once I know that, I turn the dial to achieve the speed I want to go instead of achieving the same speed in a less efficient gear.  I watch the battery meter to observe how fast the battery draw down is happening over time and choose a top speed that I'm willing to live with as a trade off of power versus battery life.  Why this works is because batteries are most efficient when the discharge rate is the slowest.  If I'm maxing the battery discharge rate, I'm reducing the battery run time. There is a sweet spot where the battery is happy and the speed is acceptable.  (2) Infinite variable speed.  This offers variable speed to a motor that only has one speed or several geared speeds.  If you couldn't quite hit the right trolling speed in a fixed gear, you can nail the speed with this variable speed control.  (3) Some units also have polarity reversal, which means that I can flip that switch and the motor will go in reverse.  If a person fashioned a remote steering system for the trolling motor, the trolling motor tiller handle wouldn't have to be touched.  It could operate remotely from another location in the boat.  Some newer motors have this feature built in, so this device wouldn't have any benefit.  A different application would be to have a 12 volt power supply and a 12 volt motor (old treadmills can sometimes have the motors).  Hook up the 12 volt motor to a drill press, lathe, bandsaw, etc. and the device would now achieve variable speed.  This is really useful for these tools.  In the case of a bandsaw, a typical woodworking bandsaw witht the right blade can run slow enough to cut metal.  The simpler way to have this effect for those tools would be to get an AC version of the pwm.  This would still work, but would be more ideal for someone willing to retrofit the tool.  It would be good for alternative energy users (solar, wind, battery banks).

Question 2

How many wires come from the potentionmeter and can you add on to them?

Accepted Answer

3 wires. tiny voltage divider...  this is all based on a 555 circuit driving 3 mosfets in parallel.

Question 3

Will this work with 2 power wheel motors?

Accepted Answer

As long as the power wheels motors are within its voltage range, yes. Just be careful not to feed them more voltage than they are rated for, or use a power supply whose voltage is matched to the spec of the motors

Question 4

¿nesecito para regular pulidoras cual es recomendable?

Accepted Answer

Este aparato es muy servisial y creo que si lo puedes usar en las pulidora rregula la belosidad

Brand	RioRand
Manufacturer	RioRand
Product Dimensions	8.64 x 5.84 x 3.56 cm; 127.01 g
Item model number	7-70V PWM DC
Part Number	RR-MJLK-FBDG
Number of Items	1
Colour	Green
Material	copper
Included Components	NO
Batteries included?	No
Batteries Required?	No
Item Weight	127 g
Guaranteed software updates until	unknown

معلومات عنا

خدمات العملاء

دعم العملاء

الوصول الإقليمي

القانونية والسياسات

اجتماعي

احصل على التطبيق

RioRand 7-70V PWM DC Motor Speed Controller Switch 30A

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة