We remain fully operational. Our teams are working around the clock to ensure your deliveries continue safely.
قم بتنزيل التطبيق
معلومات عنا
حقوق الطبع والنشر © 2024 Desertcart Holdings Limited
قم بتنزيل التطبيق
🔋 Power up smart, stay connected longer!
The EEMB 603449 lithium polymer battery delivers a reliable 3.7V and 1100mAh capacity in a compact 34.5x51x6.3mm form factor. Designed with precise connector polarity and PCM safety features, it’s UL and UN 38.3 certified, making it an ideal replacement battery for Bluetooth speakers, GPS devices, smart home systems, and more. Lightweight at 22g, it offers long cycle life and dependable performance for the tech-savvy professional.
| ASIN | B08FD39Y5R |
| Amperage | 22 Amps |
| Antenna Location | Acaia scale, Arduino Board, Bluetooth speaker, Corsair HS70, ESP32, Garmin Nuvi 880 GPS, Parrot car speakerphone, Radar alarm, Radio, Wimius system, Wireless mechanical keyboard |
| Battery Capacity | 1100 Milliampere Hour (mAh) |
| Battery Cell Type | Lithium Polymer |
| Battery Weight | 22 Grams |
| Battery capacity | 1100 Milliampere Hour (mAh) |
| Battery cell composition | Lithium Polymer |
| Best Sellers Rank | 2,602 in Electronics & Photo ( See Top 100 in Electronics & Photo ) 74 in Rechargeable Household Batteries |
| Brand | EEMB |
| Brand Name | EEMB |
| Country of Origin | China |
| Customer Reviews | 4.5 out of 5 stars 1,338 Reviews |
| Item Dimensions | 34 x 51 x 6 millimetres |
| Item Weight | 0.03 Kilograms |
| Manufacturer | EEMB Co.,Ltd |
| Model Name | LP603449 |
| Model Number | LP603449-PCM |
| Number of Batteries | 1 Lithium Polymer batteries required. (included) |
| Number of batteries | 1 Lithium Polymer batteries required. (included) |
| Recommended uses for product | Acaia scale, Arduino Board, Bluetooth speaker, Corsair HS70, ESP32, Garmin Nuvi 880 GPS, Parrot car speakerphone, Radar alarm, Radio, Wimius system, Wireless mechanical keyboard Recommended uses for product Acaia scale, Arduino Board, Bluetooth speaker, Corsair HS70, ESP32, Garmin Nuvi 880 GPS, Parrot car speakerphone, Radar alarm, Radio, Wimius system, Wireless mechanical keyboard See more |
| Reusability | Rechargeable |
| Unit Count | 1.0 Count |
| Unit count | 1.0 Count |
| Voltage | 3.7 Volts |
T**H
Works well
works great and good value
A**D
Great replacement battery.
Great replacement of the battery in an old car hands free Bluetooth speaker found in storage after years which was no longer charging or powering up. Had to snip away the wire connector plug to allow for direct soldering to circuit board but this was straight forward using snips. The battery arrived precharged at 70% level confirmed once connected to Bluetooth and offers a higher maH to the OEM battery replaced. Size and fit are great as expected.
J**Y
Does not fit Acaia scales as descrbed
Bought this as the specs matched the battery in my Acaia coffee scales and the description said it was suitable for them, but the connector is the wrong size; the Acaia use a smaller connector. I swapped the connector over from the old battery was a bit of a hassle. Otherwise the battery seems good, no issues with it so far. A relatively cheap way to get your scales working again.
R**E
Lead never again
Charges faster the lead weight a fraction of lead holds way more charge than lead. I'm never going back I have 3 bat packs for my wheelchair the other 2 will get changed to lithium so happy for the change. More charging cycles just better in everyway
J**R
Perfect replacement for a NUX Mighty Plug Pro
A great battery to replace a failed (blown/inflated) battery on a MUX Mighty Plug Pro. Just snip the connector off (without shorting the battery out!) and solder the wires to the contact points after removing the old one! It is slightly smaller than the original in length, however the battery that comes in the NUX from the factory is a custom battery, so an exact replacement is not commercially available. Very happy!
M**L
Check the polarity (I had to swap pins in the plug)
I'm glad I checked the polarity of the connector before I connected it to my Arduino microcontroller boards as they were reversed. The battery was delivered as described as described in the product listing but three of my boards (genuine Arduino and an Adafruit) all had the same polarity. I managed to pull the pins out of the plug and swap them. I was going to but a charger but I don't know what the standard is for these batteries. Do RC applications use a different polarity vs Microcontroller applications?
N**A
Fixed my problem
Purchased to replace a dead battery in a mini bluetooth keyboard and it now works perfectly 👍
M**N
Item as described
Item as described
ترست بايلوت
منذ شهر
منذ أسبوع