SUNLU 3D Printer Filament PLA Plus 1.75mm, SUNLU Neatly Wound 1.75mm PRO, PLA+ Filament for Most FDM 3D Printer, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool(2.2lbs), White

Sunlu filament is one of my favorites to use on my Bambu X1C. The print quality with the built-in Sunlu profile is top-notch. Bed adhesion on both PEI, Cold Plate, and BiQu Cryo plates is flawless. I did not experience any clogging, stringing, or other issues. I always dry the filament before use, given the high humidity in my location, to avoid issues, but it is probably not necessary, as Sunlu filament is well packed with a desiccant. On some other brands, vacuum packing is lost during shipment. Sunlu has been consistently great, with every pack vacuum sealed and holding a vacuum on delivery. It loaded and ran easily in my AMS 2 Pro unit.

This SUNLU PLA+ pack has been reliable and consistent with every print, and the colors all look great. The filament feeds smoothly with almost no jams or tangles, making printing way less stressful. For the price and quality, it’s one of the best filament deals I’ve used.

Sunlu PLA Plus filament is a truly exceptional product that I use daily. Its outstanding build plate adhesion, superior quality, accurate color representation, and impressive strength-to-cost ratio make it a top-tier choice that I use for a multitude of 3D printing applications. I think that If you're seeking a filament that delivers consistent results, enhances the durability of your prints, and remains budget-friendly, look no further than Sunlu PLA Plus. It's a reliable workhorse that I confidently recommend and will continue to purchase for my own printing projects. I always try and buy more than one because they get used so much.

I used to use a mix of Bambu, Creality, and some other generic brands. Didn't really have any issues with those but I have now switched to strictly Sunlu filaments. I find the colors to be more consistent for my use case. I have also not run into spool problems out of the box. I print mostly in PLA and after drying the spools beforehand I have only run into 2 problems with my prints, both probably user or setting problems. Because what I print are mostly small keychains and toys. The pricing is consistent to the market which is also an attractive point for me. So far I've used about 200 rolls, all PLA of different colors. They work in the AMS 2 Pro and regular AMS units for Bambu hardware. Pros - in my opinion this PLA is great. Good price. Consistent colors. Spools are good. Cons - they get brittle when left out of the box or dryer. Make sure to store them properly when not in use. Pretty much the same for every PLA spool from any brand.

Neatly and tightly spun, no tangles. Works for what I need it for, which is 250g+ prints. One downside regarding flexibility that I noticed is that when it is exposed to air, it becomes slightly more brittle than the PLA that I am used to working with, and it would snap a little bit easier while attempting to feed it into my printer's nozzle. Other than that, works great. Prints fast, the finish is flat and smooth.

Fantastic bundle of quality filament that has yet to give me any issues. I have run large prints and small prints through my Flashforge AD5X almost entirely with this bundle, and I could not be happier with it. Stringing has been almost non existent. Print quality at every scale has been great. Adhesion has not been a problem at all, and I have had zero clogs. This has been one of the most consistent and reliable PLA Plus bundles I have used.

I use the Sunlu brand for a few reasons, 1 the spools fit perfect on the AD5X printer. The spools are wound nice and the product moves smooth. I have had no issues with this filament so far and have purchased multiple versions of Sunlu. Great value for the cost, color is bright and amazing and no clogs at all.

It does indeed print correctly. It has decent luster, self adhesion, hasn't clogged on me, I'm not getting air bubbles, it's not all brittle, and bed adhesion is great. The re-usable spool is nifty too since you can separate it. The only issue I have is how the bed adhesion is perhaps a bit more than I'd like. What a problem to have, right?

Ankermake M5で使用するために購入しました。 全く問題なく使えています。 この製品の問題ではないと思いますが、湿度が高めの環境で印刷すると印刷の質が下がるので湿度の管理をされた方がいいと思います。

Perfect

Works really well in Neptune printer Just as advertised

Great PLA, I love how it prints on my K1 Max. It prints very well, no clogs and smooth prints.

PLA+なので、とりあえずメインとして使う印刷用として安かったので買いました。 PLAなのでトラブルは起きにくいですが、トラブルは何も起きずにいろいろな構造物で１０００ｇ使い切りました。 特に困ったこともないし、安かったし、リピートします。 ただ、このメーカー、Amazonのセール対象によくなるので、欲しいときに買ったら次の日にはセールで２０％オフだったとか普通にあるんで、その辺はフィラメント残量と相談しながらうまく買いましょう笑 PLAなんてどれ買ってもトラブルなんて起きないと思ってますけど、実際にトラブルも起きてないので、私はリピートします。 オススメできます！ ちなみに温度は200/60のありきたりな設定です。 このありきたりな設定で調整も無しにうまくいくっていうのが地味にうれしいです。