210372 Specialty Appliance Epoxy Spray Paint, 12 oz, Biscuit

This workes very well . The Finish looks great It's a very white white. Follow directions! I used indoors near a window with a fan and it was a bad idea . Smell lingered for about 12 hours.

I use a TON of this stuff to paint guns. Once baked it turns into a rock hard, satin black finish and can be textured as well. I love the 6 pack can offering which saves me a trip to the local hardware store. It goes on easily and air cures in a few hours. If baked it cures in less than an hour. The photo is of a rifle stand I welded and painted with appliance epoxy. This is the color/sheen after baking

I painted a couple of lite coats on the corroded aluminum lower forks on my Harley Davidson Electri Glide and they turned out looking real nice, very high gloss.

Ok so you need a man to apply this. The sprayer is SO hard to press down that you will leave large paint splatters because your finger gets in the way of the spray from trying to press it down so hard. There are marks from where the splatters landed multiple times. I made my husband finish it. My fridge was pretty bad before. So this did improve the look. Overall happy with the result.

I used this to refinish my laundry sink. The oder is strong so make sure you have plenty of air flow. Paint worked great. The sink looks like new.

I just used this to refresh my shower and tub. We recently had our bathroom flooring replaced, and in the process we decided to go ahead and shine up the rest of the bathroom before we had out of town company come for a week. First of all, I will say this: If you intend to use this on an appliance you are able to move outside, I would definitely recommend you take it outside to spray. If not, I would definitely suggest getting some face masks and perhaps a tarp to cover your surrounding surfaces. Also, you may consider gloves (although not a necessity unless you have super sensitive skin, but this stuff does get pretty sticky!). Make sure if you are indoors that you have plenty of ventilation! The odor is VERY potent (worse, in my opinion, than your standard spray paint). However, it works FANTASTICALLY! Here in Fl, we have extremely hard water. So the first thing was doing a really good clean of the surface, and then allowing to completely dry. I first used the primer, and then this epoxy. It took about 2.5 cans to complete the three shower panels and entire surface of the tub (inner and outer), and really I probably could have done a third can if I wanted a real shine, but I was basically just trying to spruce it up. I've included some photos from working on the surface in increments (I do NOT have good ventilation, so I had to stop and go). As well, I only have one bathroom in a home with 6 people, so keeping the tub dry for a long enough period to complete the entire thing in a day was incredibly difficult for me. I digress. I finally got it done, and it came out great. I would surely use this for my fridge, or any other surface that needed fixing up. The price point is great on this as well. Just make sure if you do the job, you do it completely and well, or it isn't going to last for as long. Wonderful. *Note, in the photos I took, you can see where the surface has been cleaned and painted, and where it has not; just trying to show the difference in appearance, quality for those on the market.

Why did you pick this product vs others?: I have used it for years with outstanding results every time Value for money: One can will last around 3 medium projects Quality: Once dried and cured, its almost bulletproof and requires sandblasting or heavy duty stripper to remove I use this to refinish small parts for various projects. I will spray the paint on, let dry, then toss in the oven for an hour at 400 degrees (ask your wife first). The finish goes from shiny to matte black and once cool, will give you one of the most durable spray paint finishes I have ever seen. If you dont bake it, the finish remains glossy and chip resistant. I have found that the tip does tend to clog towards the end of the can's life, but this paint formula gives you an outstanding value for your money. The photo I uploaded is of the matte finish once oven cured.

I had to cover these bad stains of orange on my white refrigerator. It actually works!!! I did not think it would cover. It does. I had scrubbed and cleaned it so many times and the stains would not leave. This covered it and I did not use anything to make sure it did not get anywhere else. It was so easy and amazing how it covers. The one thing I would highly recommend which I did not do. Please wear a mask when you do this and make sure all windows are open and their is ventilation, it is a MUST! Its a very strong scent but the real problem is that its so potent and it goes into your nose and it does affect your lungs. I did not realize it until I was done. My nostrils were all white and i had problem with my throat and breathing for almost a month and I have great lungs.

منتج ذو قيمة عالية ... قوي وثابت .وحماية .. المهم انه لا يحتاج بريمر ... اقرا التعليمات جيدا .رائع ..

deoes the job.

Hay que aplicarlo en un lugar abierto, no solo por cuestiones de salud sino también para no "brisear" todo lo que está alrededor, esta pintura es extremadamente pegajosa

Really nice product. High gloss black paint that looks like factory appliance finish. To avoid bubbles when applying the spray paint try to do so in lower humidity. I have bubbles because it's too humid here. Still looks nice.

Very smooth, just literally cover everything around 2-3 meters, it flies really far when u spray. But items look better than new! Thank u!