Thermal Grizzly Kryonaut - 1 Gram - Extremly High Performance Thermal Paste - for Demanding Applications and Overclocking CPU/GPU/PS4/PS5/Xbox

I used this for my GPU Nvidia 980ti SC, My temps before applying this was reaching around 88 degree celsius. Once I applied it, I couldn't believe the improvement. I was benchmarking on furmark and the GPU did not exceed 76 degree celsius! Great product! Note: This product isn't as slimy as the normal thermal past, it does come with a spatula to spread, but be gentle because it's very sticky and maybe a little difficult to spread. Ensure it is spread across the GPU die. (For CPU, the pea drop should be fine since the die has a heat case to protect it)

This thermal paste is unbelievable, its like magic it fixed my throttling laptop cpu. For reference i have an Intel I7-10750h (laptop edition) and the temps were fluctuating between 80 C and 96C while gaming on moderate to intensive games, which is insane. After removing the old paste and applying this new paste the temps went all the way down to 40 C and a max of 80C on very intensive games (same goes for the GPU). Size wise it is very small i was shocked at how small the thing is but the performance is what matters. Application was easy enough, just make sure to press slowly not strong and watch out cause its a little sticky and might go all over your motherboard be slow and careful. Apply a very thin layer and spread with spatula (as thin as possible ) and you are good to go for many years to come as I've heard it stays for 2 to 3 years so thats another plus.

Good for pc building

Always used the same thermal paste

Overheating 3080ti went from 83-84 celsius to 75 MAX under extreme load

Good

Did a lot of research online and this thermal paste consistently came in the top recommendations from hardware tinkerers and electronic engineers. I bought this to replace the 7-year old thermal paste on my Dell XPS 15 and was not disappointed. After cleaning off the old paste and applying this new one, my laptop fans now kick in much later, less often, and run at slower speeds as the paste does a great job transferring the heat to the fans Remember, heat is the enemy of electronics and this is the enemy of heat. Worth every cent I paid for it as it improves the longevity of my laptop

Not even enough for 1 cpu

Die Thermal Grizzly Kryonaut gehört für mich ganz klar zu den besten Wärmeleitpasten auf dem Markt. Ich habe sie für meine CPU verwendet und konnte direkt spürbar niedrigere Temperaturen feststellen – sowohl im Idle als auch unter Last. Die Konsistenz ist sehr angenehm: nicht zu flüssig, nicht zu zäh, lässt sich sauber und gleichmäßig auftragen. Mit der 1-Gramm-Spritze kommt man für mehrere Anwendungen aus, je nachdem wie sparsam man arbeitet. Besonders für anspruchsvolle Systeme, Gaming-PCs oder Overclocking absolut empfehlenswert. Die Wärmeübertragung ist hervorragend und die Paste bleibt auch über längere Zeit stabil. Wer das Maximum aus seiner Kühlung herausholen möchte, macht mit der Kryonaut definitiv nichts falsch. Klare Kaufempfehlung!

✅ Points positifs : - Excellente conductivité thermique, améliore très bien le transfert de chaleur. - Parfaite pour processeurs, cartes graphiques et dissipateurs thermiques dans PC et consoles. - Facile à appliquer et étaler uniformément. - Quantité de 1 g suffisante pour plusieurs applications si utilisée avec parcimonie. - Très populaire auprès des passionnés de hardware pour overclocking ou refroidissement optimisé. ❌ Point négatif : - Prix plus élevé que les pâtes thermiques basiques (mais on sait pourquoi !) 👉 Résumé : Une pâte thermique premium très efficace pour améliorer les performances thermiques des composants, idéale pour les configurations exigeantes, même si le prix est un peu plus élevé que la moyenne.

I bought this paste for 3 different devices: an Asus G20CB desktop, an HP Pavilion desktop, and a 2021 Asus G14 laptop. After verifying that the paste was authentic, application was pretty straightforward and easy since it came with 2 different nib/spatula tips for the syringe of pate. I basically run stock after removing the bloat, no overclocks or anything, but I still wanted to repaste due to improvements to temps. Because of that the 2 desktops didn't see much difference, 3–6-degree Celsius give or take for the CPUs and GPUs. And even now, it is still holding the same temps as it did underload as it did when I 1st repasted it. My G14 however did see a sizeable improvement from what it originally had; CPU saw a 13 degree drop and GPU saw a 5-degree drop. I can't really say if it was because the factory liquid metal application was botched or just old, but this paste does well enough to keep the CPU from going past 85 degrees since before repasting my highs would sometimes reach 100 degrees and prevents my fans from turning into jet engines. It did last a good 13 months before temps are starting to slowly climb, so I will need to repaste soon. Will probably try Hyronaught this time since others reportedly say that it is better for laptop use due to higher idle and heavy load temps. Overall, it is an excellent product (if authentic, BEWARE OF FAKES). Yes, it is expensive, but the performance results do speak for itself and the reputation that it gained as a go-to by known overclockers is warranted; but it is ultimately up to you how much you value that improvement and if it is worth the price. For me however, despite not being an overclocker, it was worth every penny since lowering those operation and idle temps is just another way to have my last longer.

Uit vele testen op YouTube bleek deze de beste te zijn, dat merk ik ook in mijn PC na wat benchmark testen.

I expected nothing less 10/10 cooling for liquid or air coolers Great for overclocking with reasonable temps Price is a bit high tho The Market itself selles it 100 pound cheaper