Lian Li Pc-O11Dx 011 Dynamic Tempered Glass On The Front Chassis Body Secc Atx Mid Tower Gaming Computer Case Black

The case is well made with good airflow. The case arrived on time but at the time of purchase it was overpriced therefore the lower rating. I would recommend buying directly or from a seller with reasonable pricing.

I've now built 4 PCs in the past 7 years or so, and this is by far the best case in which I've ever built. If you're considering this case, you're probably here because you've immediately noticed how stylish it is. It's just as pretty and sleek in real life as it is in photos, so if that's your primary concern, go ahead and make the purchase. However, what isn't readily apparent in photos is just how high quality the materials are. The sleek brushed aluminum panels are solid and pleasantly hefty, though not so heavy they weigh the case down unnecessarily. Further, they all slide into place and lock one another together in an impressive, intelligently designed way so that the case remains solid even before applying the thumbscrews to lock everything down. This is more of a big deal than it sounds—nearly every case in which I've built (even the expensive ones) feature some kind of annoying rattling, or a panel or fan screen that doesn't quite fit as snugly as you'd like. As the PC ages and the fans vibrate everything continuously over years of use, this tends to create rattles and light ambient noise that will annoy you more and more over years of usage. I'm now nearly 6 months into using this case, and I've got 9 fans in it (probably overkill, but let me live). I'm a heavy gamer, so those fans are often spinning at 100%, and this case has zero rattles whatsoever. Airflow is superb and it keeps components clean. I have used cases in the past which featured plastic windows and had poor airflow, this case has solid, heavy glass, and airflow is impeccable. It's also got superb layout for easy cable management and PSU mounting, and although it tucks the PSU behind the motherboard, I haven't noticed any heat issues from this location, as fresh air is amply supplied via properly located vents in the case. I've heard people say building in this case is somewhat difficult, but it's been by far the easiest case for me to build in out of others. Whether this is due to my growing skill at building multiple PCs, or because the case is better designed, is difficult for me to say. But I don't consider myself a master builder or anything like that (I build only for myself and for pleasure), so I'd lean towards the latter. I've gushed enough, so to summarize, I'll say that this case looks beautiful, it's impeccably designed, the materials it uses are superb, and it's easy to build in. It's also far cheaper than some of the other top cases on the market. Lian Li has made a fan of me. The only way I'll ever replace this case is if Lian Li releases a better model. You really can't go wrong with it, unless you need an optical drive. But who needs an optical drive in 2020?

Features & Specifications: Lian Li's PC-O11 Dynamic is a gorgeous chassis with large tempered glass panel, outstanding water cooling support, and a surprisingly reasonable price tag. Exterior: Sharp eye readers will remember that the Lian Li PC-O11 Dynamic was awarded 'Best Value PC Case' award at CES 2018. This chassis, designed in collaboration with renowned extreme-overclocker Roman "Der8aur" Hartung, features steel-and-tempered-glass construction, with a brushed-aluminum accent panel. The chassis measures 450 x 275 x 450 mm, is painted black inside and out, and weighs in at just under 10 kg. The top of the chassis is flat and, with the exception of a 5 by 15-inch row of ventilation slots, is featureless. There are no handles, buttons, slots or ports on the top of the PC-O11 Dynamic. The aforementioned slotted vents span almost the entire length of the left-hand side of the chassis, front to back. The right-hand side of the front of the chassis is covered by a brushed aluminum panel that is home to two USB 3.0 ports, microphone and headphone jacks, a power button, and a single USB Type-C port. The majority of the front of the case is covered by a 420 x 220 x 4 mm tinted tempered glass panel. The fact that this chassis is equipped with a full-cover tempered glass side panel isn't anything special, many cases these days have one or more glass panels. But it's the rather ingenious way the tempered glass panels are attached to the case that makes this chassis stand out. The tempered glass panels can only be detached once the top panel has been removed. This is clever design minimizes the possibility of dropping a glass panel during installation or maintenance, and the lack of traditional thumbscrew fasteners gives the PC-O11 Dynamic a sleek and stylish look. Those of you concerned about airflow need only to look at the panel on the opposite side of the case, where you'll find slotted vents, identical to those on the top panel, covering both the front and back of the stamped-steel panel. Just as with the glass panels, the top panel has to be removed in order to gain access for clearing and maintenance. The rear of the chassis is home to eight expansion card slots, a motherboard I/O area in the center, a mounting location for a bottom-mounted PSU, as well as an opening for two 3.5" hard drive slots. The bottom of the case has three filter-covered mounting locations for 120mm fans, as well as four large, rubber-lined plastic feet. The PC-O11 Dynamic features a solid fan filtration system. Every intake fan mounting location in this chassis is equipped with a large washable magnetic filter. Overall, these filters do a good job preventing dirt and dust particles from entering your system. Cooling: When it comes to cooling, it is a bit disappointing to discover that the PC-O11 Dynamic doesn't ship with any fans from the factory. Obviously, this can be remedied by the end user, but it would have been nice to see at least one fan included with the case. In total, this chassis can be equipped with up to 9 120mm fans, or a combination of two 140mm and 6 120mm fans. AIOs and radiators up to 360mm can be installed in the top, side and bottom of the chassis. When adding an AIO or Rad in the side mounting location, the Rad can be installed (with fans) in the primary compartment or, for a cleaner look or to make room for other components, the fans can be mounted in the main chamber with the Rad in the secondary chamber.

بس المشكلة حجمة كبير ولازم تشتري المراوح كلها

Es un gabinete bastante amplio, con materiales de alta calidad, ya que se siente bastante robusto y fuerte, muy bonito diseño. La verdad es totalmente diferente a otros que he visto en cuanto a materiales, antes tenia un Corsair Obsidian D500 que es amplio y de buena construcción, pero el Lian Li se siente de mayor calidad, los cristales son mas gruesos de lo normal ya que son pesados y se tiene la posibilidad de quitarlos fácilmente sin necesidad de desarmador, en cuanto al manejo de cables hay espacio suficiente para realizarlo sin complicaciones. Este modelo tal vez lo único malo que le encuentro, es la falta de posibilidad de montar un ventilador en la parte trasera, la cual fue agregada al modelo actual (XL Rog), pero por lo demás estoy bastante contento y mas, cuando lo adquirí a un super precio (3305.15 pesos) ya con envió incluido y totalmente nuevo.

Had it for over a year now No problems, just works