10 String Multi Effect Processor, AmbidextroUS, Silver (Fbq800)

Le son qui sort d'une chaîne hi-fi est souvent un peu agressif. Cela semble dû à deux facteurs principaux : * Une dynamique très forte, surtout avec les CD de fabrication récente. Ce qui explique je pense la vogue renouvelée du disque vinyl dont la dynamique, bien que déjà respectable, est un peu moins forte. * Une intensité trop grande du "medium", c'est-à-dire des fréquences de l'ordre de 500 à 1000 Hz : les attaques de notes au piano fatiguent l'oreille, de même la flûte, les voix de femmes. Avec cet appareil, on ne peut pas jouer sur la dynamique, mais on a un parfait contrôle de tonalité, on peut l'organiser exactement comme on veut, et changer d'avis n'importe quand. Il en résulte un confort, un agrément d'écoute, très amélioré.

Its a nicely design product that fuilfill your music taste. Initially I was in doubt about its sound quality but when tested with my DIY dac cum amplifire it shows its charecteristics. Background noise is absolutely not hearable and sound is clean particularly at 12 db mode. Voice is clear with ample amount of bass charecterictics within. Only negative aspect is light plastic body which is not firm on its base and often get shifted from its position due to audio input/output jack cable rigidity. Also may succeptible to outside interferance due to plastic body that may allow high frequency to pick up by the internal circuits. Go for it, it will serve your purpose.

Very good device. I use it to change the sound of my electric piano towards the monitors (add more brightness and low end, and reduce some sharpness). It works really well for this! It's a virtually noiseless device, save for when you dial up the volume. At 12 o'clock input volume it sends out the signal 100% of volume as it receives it. Past 12 o'clock, it boosts up the signal. So if your output of your device is pretty low, this device will actually boost the overall volume by around 12dB. Additionally, the 9-band EQ can also boost/cut the volumes upto +/- 12dB. The buttons are pretty self-explanatory. It has a 75Hz cutoff, that will protect your speakers in case of some low frequency popping (like cable disconnect, or so). The second one, is one of those buttons that don't make a lot of sense. In/out is actually to turn on or off direct sound. When pushed in, the light is on, and all buttons and eq of this device work. When off, the sound input is directly routed to the output. In my opinion it makes no sense, because if I wanted to have a direct line, I wouldn't have put this device in between the signal cables. In other words, I think by default this led light and button needs to be OFF, and they need to change it to 'DIRECT', instead of 'In/out'. Meaning, the majority of the time, I will be using this device. The LED doesn't need to be on all the time. But anyway... the 'Input output' button allows you to select to see either input or output volume levels on the eq. It allows you to see if the input level is too hot, or the output level is too hot. The 9band eq works well, however, with the volume dialed past 12 o'clock, the device creates some hiss heard in the last two frequencies (especially when they are boosted) (8/16kHz). FBQ, no idea what this does, however all eq slider leds go off when selecting it, and when playing a tone, the frequency matching closest on the EQ slider will light up. This might be helpful for beginners, when trying to get rid of annoying feedback, or too much frequencies in the room. One can use FBQ to see which frequency offends (the led will turn on), and reduce the volume on that slider. Personally, I don't use it. Anyone with 1 year of more of sound engineering, or who is careful about the sound quality and has worked with mixers before, won't need this feat. Another issue with this is that I've found that some of these leds, actually stop working within a year time. So if you ask me, it's a useless feat, that could have been removed so that the overall price of the device would be reduced. In fact, I wonder why Behringer hasn't yet created a bluetooth operated device that can be controlled by a bluetooth phone and app. No control sliders, no buttons save for power, and perhaps 1 to 4 different modes (banks) that can be saved via the phone. This would easily half the price of the device. Anyway, further on the real device review: 6/12dB allows you to select the range of EQ amplification/cut. The EQ sliders from center up to the max will boost the signal by either 6 or 12dB depending on the slider. 6dB is for fine adjusting. 12dB allows you to adjust some signals that are seriously offending to the ear, and reduces them to a more tolerable sound, better fitting the other frequencies in the spectrum. power button back side allows for 2x mono jack, and 2x kinch inputs, as well as the same outputs. Probably the cheapest and best EQ you can buy for the money, Does what an EQ is supposed to do. Great for adjusting sound of music instruments (piano to monitor, guitar to combo, bass to bass rig, acoustic-electric guitar to stage monitor, flute microphone to mixing board,... the possibilities are endless...), home theaters, even changing the overall sound of a PA system right before the signal enters the power amps.

I added this unit to my new set-up after about 2 weeks without it. I am hard of hearing using expensive Seimens hearing aids to overcome 40 db of hearing loss. I wanted to listen without headphones, so some adjustment to the audio profile was needed. I reviewed about 10 different EQ before deciding on this one. I have been using it for over a week at this point, and I am definitely not disappointed. It is easy to use with several technical features that are useful, some beyond the scope of my application. It worked perfectly out of the box. Although the operating instructions are a little sparse, careful reading and experimentation overcomes any deficiency. I would definitely recommend this unit for play-back EQ where good control of the audio profile is required, without breaking the bank.

ちゃんと日本仕様の物が届きました。 構成はPC→本機→BOSE Companion2 SeriesIIIです。 アナログ入出力にもかかわらず、ノイズが全くありません。 またYouTubeにある「15 Hz - 22050Hz . Hearing Test」を試したところ、反応する周波数帯がドンピシャでした。 音の劣化も感じません。 少々お高い割りに本機はとても軽いので不安でしたが、結果買って良かったです。 欲を言えば、63Hzのさらに下の31Hzが欲しかったです。