Question 1

what the difference between this and the polycrylic??

Accepted Answer

I use both for different reasons. This oil base is more durable against wear and water rings than polycrylic for things like table tops and countertops. It is easier to get a smooth finish when brushing because it dries slower and flows out flatter. It WILL impart a warm, yellowish finish that is visible on lighter woods, and it will create a darker patina with age. It gives a warm, amber glow to medium or dark wood finishes. This quality may or may not be desirable. It usually only requires two coats. Use it for durability, a warm, aged patina, and ease of application towards a smooth finish.

Polycrylic is not as durable and can show "elbow wear" on table tops after a few year. It will stay crystal clear on white woods, but can impart a milky sheen on darker woods. It dries fast, so you can sand between coats much quicker than oil. However, that can make it tricky to brush it on and get a smooth finish, especially if you brush back over it when it gets tacky. It requires minimum of 3 coats, 4 for long durability. on wearable surfaces Use it when you need a crystal clear finish on light colored woods, and fast drying between coats is desired.

Question 2

Will it be very shine and smooth for the surface after I use? thanks

Accepted Answer

Yes.  I recommend first using a 600 grit sandpaper to lightly remove old finish. Remove all dust with a damp cloth, and then lightly spray on first coat (Thin coat best).

Wait 24 hours to dry. Next lightly sand using a 1500 grit sandpaper, remove all dust with a damp cloth, and then lightly spray on first coat (Thin coat best). Repeat this step two more times. Glass feel may require additional applications. Remember thin coats.

PS: If you choose the brush method, do not use sponge brushes since it is more likely to leave bubbles, use a good quality sable hair brush. I did a bar top decades ago applying clear polyurethane with about 20 thin coats in the first year about once every other week and I left a penny at the end of the top and coated over it until it disappeared ant the bar top was so smooth. The top was red mahogany that is probably still a luster for the new owner. I could slide a bear from one end to the other end.

Question 3

Can this be used on floors?

Accepted Answer

Yes, this oil based polyurethane fast drying is absolutely engineered for hardwood floor and definitely in high traffic areas. I used the water based polyurethane in the dining room and this is the hallways, this looks so good and is holding up better than expected.

Question 4

what is the best way to apply this

Accepted Answer

Use a bristled brush. Those sponge brushes leave bubbles in it.

ASIN	B000VZLF58
ASIN	B000VZLF58
Best Sellers Rank	#14,056 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #14 in Household Wood Stains
Brand Name	Minwax
Color	Clear
Compatible Material	Wood
Coverage	250 sq ft/quart
Customer Reviews	4.6 4.6 out of 5 stars (13,426)
Customer reviews	4.6 4.6 out of 5 stars (13,426)
Date First Available	7 August 2012
Department	Stains & Sealers
Finish Types	Satin
Global Trade Identification Number	00027426630109
Included Components	MINWAX - 27426630109
Item Dimensions	10.8 x 10.8 x 12.4 centimeters
Item Type Name	MINWAX - 27426630109
Item Weight	1 Pounds
Item model number	63010444
Liquid Volume	32 Fluid Ounces
Manufacturer	The Sherwin-Williams Company
Manufacturer	The Sherwin-Williams Company
Material Type	oil based
Model Name	63010444
Model Number	63010444
Product Dimensions	10.8 x 10.8 x 12.42 cm; 453.59 g
Recommended Uses For Product	Interior
Size	Quart
Style Name	Satin
UPC	027426630109
Unit Count	32 Fluid Ounces

Minwax Fast Drying Polyurethane Protective Wood Finish, Warm Satin, 1 Quart

التفاصيل

الوصف

المواصفات

المراجعات

الأسئلة الشائعة