VIVO Dual VESA Bracket Adapter, Horizontal Assembly Mount for 2 Monitor Screens up to 27 inches, MOUNT-VW02A

Very simple to put together with not very many parts. It's extremely sturdy and has held my two 27" monitors in place. It's able to hold the tilt angle well and has a wide range. The bar is sightly curved and allows you to easily slide the monitors and adjust the tilt (L/R) so that they always do flush in the middle. There is no vertical height adjustment. I wish it came with a small bar that would allow you to mount it across two studs instead of drywall anchors. I ended up buying a small piece of wood from Lowes (20" x 6" x 1/2") and mounting that on the studs and screwing the mount into that. There's no kind of quick release for placing or removing the monitors from the mount, but at this price I would expect that.

The mount is only rated up to 27" monitors, however I was able to fit my thin-bezel 32" monitors without much issue. The only complaint about the mount that I have is that I found it to be about an inch shorter than expected, which is probably because of the curve in the arms. The 32" monitors I used are almost exactly 14" from the center of the mount to the outer edge, for a total of 28" center to center, which should have left about 4" of total space, or about 2" on either end of the mount. I ended up having to remove the end caps and push the monitor mounts out to the edge of the bars, but I was able to get both monitors to fit without issue. I also ended up mounting this to a flat TV wall-mount bracket, which worked wonderfully. I HIGHLY suggest using a wall-mount TV bracket (and a flat one, not one that tilts) as a backer for this mount if you plan on using using heavier monitors or larger monitors. This will give you the extra weight-handling for heavier screens, as well as an easy way to adjust left to right if your wall doesn't have a stud in the exact center of where you want to mount it. I had considered knocking off a star for the total width difference due to the angled bars, but I'm using the mount outside the recommended specs, and it still works perfectly for my use, so I'm keeping this at 5 stars. For reference the monitors I'm using are LG 32GK650F-B.

I purchased this to replace a dual monitor stand that was taking up alot of desk space. While this can be mounted to a stand I purchased with the intent on mounting the wall. I ended up doing what most people do, and securing a solid piece of wood to the wall in 2 studs and then mounting the unit into the wood. With that being said, if the manufacturer had the option of including a plate that the mount could slide horizontally to allow monitors to be easily centered I would definitely pay more more this product. I knocked off a star because when assembling the unit the screw holes for the arms were filled with the black enamel making it difficult to start the screws. I had to spend some time working the screws in before I could secure the arms. Otherwise, this unit was very easy to assemble.

Product works as mentioned, and looks great. I have 2 27in curved monitors and it’s holding them up well. Only downside isnt necessarily the products fault, but it definitely takes a couple minutes to get the monitors centered and even. Just as a tip, the mount is too small to reach 2 studs, so i cut a 1x8 to 38 inches and drilled that to the wall, and mounted this on top of that. The 1x8 can only be seen from side view.

I was looking for a simple dual monitor wall mount for two 19.5" monitors which would fit a 34" wide cheapo desk from Hayneedle. This completed my perfect home office setup. I needed to lift my monitors so I could do video conferencing while also using my monitors. Now I can have all three screens open, without having my laptop block what's going on with the other two. Super easy install, very sturdy, great price. If you don't need an arm this is a great choice. The individual VESA mounts both articulate so you can get perfect tilt and/or rotation you're looking for.

I needed something to directly mount dual monitors to the wall without cumbersome articulating arms getting in the way as once it's mounted I'd have no need to move anything. This fit the bill and was crazy cheap as well. I made a simple back plate out of scrap plywood in order to span the studs and give it a secure mounting position where I needed it. This is an absolute MUST for safely mounting! The monitors I used were pretty light weight but anything larger would not stay if it weren't for the secure mounting. Ultimately I'm super happy with how it turned out. Once the cables are cleaned up with a cable cover this setup will look killer!

This monitor holder worked ok after I modified it a little. The screws are mediocre quality i.e.- The head strips when attempting to tighten. I replaced plastic "washers" with steel lock washers so the clamp would hold without slipping. The frame is sturdy enough.

Good solution to install dual monitors on the wall. I wanted to reclaim some space on a small desk and this worked great. The metal construction felt sturdy, well made, and was easy to assemble. I made a small modification, drilling some centerline holes to allow mounting to a wooden stud in the wall. After that, installation was easy and took under 30 minutes. The kit came with cable management clips too. No way to beat this for the price!

Perfect monitor mount, simple and strong, thankyou

Lovely bracket. Holds 2 monitors nice and sturdy

Excelente producto, fácil de instalar y muy resistente

I picked up the VIVO Dual VESA Bracket Adapter (horizontal mount) to run two monitors on a single stand/arm, and it’s been a solid upgrade. The bracket feels sturdy and well-finished, and once installed it holds both screens securely without flexing or feeling sketchy. Assembly was straightforward, and the VESA mounting points lined up properly. After mounting, it made my desk setup look cleaner and more organized, and it’s a great solution if you want a dual monitor layout without buying a whole new stand. It also makes it easier to keep both screens level and evenly spaced. A couple of practical notes: make sure your stand/arm can handle the combined weight of both monitors, and take a minute to measure your screen sizes and spacing so you get the positioning you want. Once dialed in, it stays put and feels rock solid. Overall, it does exactly what it’s meant to do—simple, strong, and a great value for a dual-monitor setup up to 27"

Was wary due to some reviews. Fixed two large monitors to it no problem. Lined up together a treat with a good viewing angle. Good cable clips and end caps. Was actually really impressed with the quality.