Ringke Fusion Compatible with iPhone SE Case, Crystal Clear PC Back TPU Bumper Drop Protection, Shock Absorption Technology for iPhone SE (2016), iPhone 5S (2013), iPhone 5 (2012) - Clear

I've never used cases on any of my devices before. When I buy a phone or pda part of what I'm paying for is something that easily slips into my breast or pants pocket with minimal fuss.I was planning to give my iPhone 5 to my wife and get the new iPhone 5S when it came out when I noticed I'd somehow dented one of the corners on the 5. For myself I likely would not have minded but I wanted to pass on as pristine a device as possible so I decided to get a case to protect her "new" phone.I tried a couple of other cases for a few days and was not at all happy with them. They either separated (different materials on back vs edges not properly bonded together), they made the buttons difficult to use or the case made the device unacceptably bulky or "grabby" (i.e. could not easily slide it into my pocket).This case has none of those issues. The construction is top notch. It fits perfectly with no gaps or loose spots around the perimeter of the phone.If anything it's actually easier to operate all of the buttons, not only the top button but also the volume buttons on the side as well.You can feel that the "TPU" material that protects the edges has a bit of give when you squeeze it with your fingers, but it doesn't have that rubbery tendency to "attach" to fabrics or collect dust that you find with more rubbery materials.The minimalist design meant that, while I now had a larger phone, it was only minusculely so. The clear back (on the model I chose) allows the Apple esthetic to still come through.I liked it enough to transfer the case to my new iPhone 5S and I will be keeping it on there going forward. I had to take the case off a couple of times to clean out some grit that made its way in during the transfer and the multiple on-off actions did not affect the fit at all - something that I was a bit concerned about.My wife immediately tried a case (didn't like the black of my case) loaned to her by a friend and it's just junk. Gaps around the sides and next to impossible to turn off the phone via the top button.The model of this product that I bought is currently all messed up on Amazon (cannot order as Prime even though it says it is) so you need to order from on of the other options and pay extra to ship it but at only $9 for the case in the first place... eminently affordable.

This is a great case for the iPhone SE. The case went on easily, fits tightly, and all of the buttons are easily accessible, as are the charging port, speakers, etc. This case has already protected my phone from falls of 2-3 feet twice. The case is thin & sleek, so it is a good compromise between protection and minimal bulkiness. This Ringke clear case shows off the rose gold finish of the iPhone nicely so the phone is protected but looks great. And the bumper protects the screen nicely when the phone is put screen-side down, thus preventing scratches on the screen. The only thing that makes this less-than-perfect is that the plastic finish (TPU) is smoother & a little more slippery than a silicone-type finish. In the end, I am instead using a TPU Gel Rubber Silicone Case from Love Ying, which feels slightly easier to grip. The reason that I had to get the SE is because most iPhone 5 slipped out of my hand and died, so 'grippiness' is important to me. I also tried the TPU case from JETech and it is very similar to this one from Rinke Fusion.

I have been using the case for about two months now and I am generally satisfied with the product and would happily recommend it. But you need to align your expectations with the $10 price tag.What you will get:1. A well designed and manufactured product that does everything it should, to a point (more to follow). I chose a clear case that is as slim as it can be that doesn’t obscure the beauty of the phone or obstruct any features or functions—camera, buttons, connecter, etc.2. A case that fits the phone well—not too tight or too loose. The soft and flexible TPU “bumper” enhances the grip and provides cushioning from “light” impacts.3. A co-molded (A plastic molding process that fuses two materials together seamlessly.) hard plastic (Polycarbonate, or PC) back that shields the back of the phone and reinforces the phone to reduce the chance of structural damages (display is a different story) when dropped.4. A strap holder at the lower left corner that enables you to attach a wrist strap which is something the older cell phones used to have. I like it.But with the pros, there are some cons:1. As mentioned, the soft TPU bumper and hard Polycarbonate back are co-molded. It is visually pleasing because the joint line is hardly visible. But the joint line is often a weak line as well where if the case is under too much stress, the two materials could separate. But you don’t need to worry too much about it in normal use.2. As you should expect, the soft and thin TPU bumper provides only limited impact protection to the phone even if the case itself survives. I suspect that a “perfect” 3-foot (or higher) drop, at the corner, onto a hard surface such as concrete, the display will likely crack. If you anticipate frequent drops, you should consider buying cases that are more robust. They could cost 3 or 4 times as much, and bulky. You just need to pick your priority.3. Polycarbonate is strong and tough. It doesn’t break easily. But it is also a relatively “soft” plastic material, which means that it is easy to scratch. Fortunately the four corners at the bottom are slightly raised by the soft TPU. This will prevent or minimize the scratches to the back of the case as long as you don’t jam it with other hard objects in the pocket.I consider a $10 case sacrificial. If it provides good services for a year or longer, I am happy. I will just get a new one when it is beaten up. The reason it does not get 5 starts is that I think the description oversold its “Drop Protection/Shock Absorption” capability. With high impact, the case may survive, but your phone may not.

Le dio vida nueva a mi celular, deja ver la estética limpia del diseño de Apple pero le agrega un toque de color en los bordes.Llevo un tiempo usándola y se ha mantenido en buen estado, se me ha caído un par de veces el celular y no le ha pasado nada (No han sido muy fuertes los golpes, aclaro.)El plástico se siente de buena calidad, no se ha amarillado en absoluto como con otras fundas de plástico mas barato, tiene una resistencia bastante aceptable a los rayones y los botones después de un tiempo se han mantenido intactos y funcionales.

I got this case for my girlfriend after using the same case for my phone. I've had my case for months now and it's the best device case I've ever used. The profile is slim. The sides have a grip that allows you to easily hold on to. But not too grippy, allowing it to slide it into your pocket. I've dropped my phone half a dozen times without any issue(knock on wood). The highest of recommendations.

È una custodia di notevole qualità con bordo semirigido nero e fondo in plastica trasparente. La utilizzo con IPhone SE space Grey con il frontale nero che si intona alla perfezione con il bordo nero della custodia, risultando esteticamente molto leggero. La costruzione è ottima, molto positivo il fatto che a distanza di quasi sei mesi non si apprezza alcun deterioramento e la plastica trasparente del fondo non si è quasi per nulla ingiallita. Ne consiglio l'acquisto.AGGIORNAMENTO Feb 2020: dopo oltre 18 mesi di uso continuo la custodia è ancora in più che ottime condizioni e la plastica trasparente non si è per nulla ingiallita. Davvero un prodotto consigliabile.

Best

Price is at higher side but it's really great case for iPhone 5s. Would recommend to buy. Don't forget to look for colour options, I got the option of only black case. It's been more than 3 months I have been using this product. The fit is perfect and met my expectations. It's worth buying