Hogue Powerspeed Univ Speed Holster, Black, One Size, Model: 00500

I like the fact that the polymer doesn't scratch or mar finish on handguns. Good quality product that fucntions just as it should.

For singular purpose of a lightning fast draw, you absolutely can’t beat this holster. That said, you REALLY need to think like a gamer to use this holster. The magnets provide VERY little retention, and the barrel shroud works but removes the magnets. If you have a steel frame firearm, this probably won’t work. This holster can’t handle my 1911’s, Jericho 941, Etc. I just don’t feel comfortable on the line with the firearm barely being held in place. If you’re a steel challenge shooter and can carry the pistol to the line before bolstering, you can’t beat this.

This holster is what it is advised as ambidextrous and universal. Set up can take a few minutes. But is straight forward. The retention mechanisms is solid with positive indexing you can feel. The low ride duty belt loop is good for a range or open carry purposes. The mid ride belt loop leaves one wanting for more. ( I did find a solution by using the paddle off of a Blackhawk SERPA holster. The bolt pattern is very close and give more options for canting the gun.) There is lots of plastic in the lock. It would take a very strong person to break it (think body builder). You do have to re engage the lock when holstering but this is just training. The two concerns I would give to a potential buyer are these. One the holster gives no cover on the top and sides of the slide. So keeping the gun looking good will not happen when you in advertently bump it. And two as should be obvious. It will not permit the use of a P rail light/ laser device. All in all it is a good product. If you are looking for a outer waist holster with low profile and good security this maybe for you. And a word on longevity. I have talked to a police firearms instructor who has used this holster for 4 yrs every day without fail. Take care and I hope this review helps you.

Configured for a Glock Race Gun with holo sights and muzzle compensator that wouldn't fit a standard holster. I like the adjustments and cant. You'll enjoy this for competition or plinking. They say it is for duty use, but I wouldn't want an exposed weapon for duty use. The trigger is covered while the slide is exposed. It looks cool. There are magnets that hold the slide securely along with a separate trigger device.

If I could give this zero stars I would. The directions are very poor and was near impossible to even get it some what close to fitting my m&p9L. I paid nearly double the price to get it the next day and the seller did excellent at that. I should've just spent a little more and got a safari land 014. O well you live and you learn.

Came in a timely fashion, best price I could find anywere. Not only does it work on the two guns that I ordered it for, which by the way is a S&W Performance Center 1911, and a Les Baer Hemi 1911, but after checkin it out, I realized it works for my glocks also. Win/Win. I definetly recommend this product, and the seller. Hope this helps. Thanks.

Only one of all my belts would fit through the belt hanger, and that was a dress belt! The holster is just fine, but there is no possible way to fit a competition belt or even an EDC belt!

holds the 2011 allows for faster draws but pain to set up and does not secure the weapon very well at all while walking around the event I had to add a Velcro strap to make sure I don't dq again.

レースガン用ホルスターとして購入(勿論トイガン)。 流石、実銃用だけあり剛性も高くロックもしっかり。 ただトイガンには不向きだと思います。 こちらホルスターのフレームにマグネットが内蔵されており。銃とホルスターをロックと磁力でホールドする機構なので磁力に反応する材質でなければロックはされるがホールドが甘い(かなりブラブラ)ので当然トイガンには実用面では…です。 物は大変良いです、トイガンに向いていないだけ。あと実銃でもポリマーフレームや軽合金フレームとかの磁力に反応しないものにも不向きだと思います。 なので私はロマン実ホルスターとしてコレクションします。

Read the instructions and fit holster carefully. I had to do a small modification to improve fit. Once done the holster was secure and allowed very fast use of firearm. Some people have complained about the capability to securely hold the firearm so I tried wearing this while doing military obstacle course multiple times and firearm stayed secure in all areas..

ワンタッチで固定解除と抜き打ちが出来るホルスターを探して購入。某旅人を切欠にこの商品を見つけました。付属の工具で分解することにより左右の入れ替えや幅の調整(トリガーがードの幅で合わせる)と、ベルトに対する取り付け角度を調整可能。角度は前後への傾けが4通りと、想定されているかは不明だが完全な水平にも取り付けられます。注意するべきなのは外側が極端なカーブ形状のトリガーガードの銃だと恐らく銃が回転してしまうこと。その場合のために銃口付近で上から押さえるようなアームも同梱されていますがハイキャパ程度に銃先端の高さがあると無改造では取り付け不可能。 私はハイキャパで使用しました。トリガーガード等はマルイ純正パーツでほぼガタつきなく固定可能です。調整した後の銃の取り外しはT字型のレバーの押し込みだけ。ベルトの幅に対してもある程度の調整機能がありました。 ホールドパーツの渋みが無くなったあとの挙動や耐久性、余りパーツの用途など、金額に見合うかまだ不明なため☆4でした。機能には満足しています。

It fits my 1911 4.5mm BB gun perfectly. -2 stars - When locking in my other gun (has top rail), the handle pushes in the mag release switch. Holster popped my mag out into the dirt when I locked the gun in. Buyer beware if your weapon has a long mag release protruding out the side. I'll have to purchase a different "speed holster" for my second gun (Tanfoglio).

i got this about a year ago for my 1911 because i was running a suppressor on it and needed a holster that i could run with that setup. This thing is amazing, and you can use it with any pistol, however you cant use it on guns with a tac light.