24 Volt Children Electric Car DIY Modified Wires and Switch Kit,with Remote Control, Self-Made 24V Baby Electric Ride On Car Accessories

Used this to upgrade a 1 motor 6V Ride on Car to 20V version. I bought 2 separate motors and a Dewalt 20V battery adapter. I was not able to add the 2nd motor, since I needed a bracket but I'm sure it will be easy to add once I get the bracket. I used the existing pedal since the one that came with the kit was too small. The remote works well but since this model ride on doesn't have electronic steering, it's pointless. Make sure to have connectors ready along with heatshrink to connect wires to the existing/new parts. Now my 20V 1 seater ride on is faster then the 2 seater 12V. Will probably modify the 12V with this kit as well.

Received the 24v DIY kit today. It arrived as described. The control board is 24v and 40 amps. I'm going to upgrade the 12v steering motor, drive motors, entertainment unit, and lights with 24v units. So I can only say that it arrived on time, as described.

I bought it and installed it but it goes for a little ways and cuts off and then you can take back off and it will cut off in little bit again What do I need to do to fix it Thanks

I bought this setup to rewire a 6V VW bus ride on. now the bus has a craftsman 20V max battery for power X (2) 12V 40,000rpm motors and this wiring setup. The little bus cooks now. My 5 y/o grandson loves it!! we can take it to the park with multiple batteries that I have for my craftsman tools. when 1 battery runs low, I have another ready to go in the bag. Added note : this requires some electrical wiring knowledge. there are no directions so i used the picture from the advertisement as my guide. i did not use the stock 6V radio and Lights. I added some 12V car light bulbs and wired in a 12V amplifier and speaks for a mini mp3. The bus has (2) 12V motors, 1 on each back wheel. I bought a car horn at the local salvage yard, works great.

This product is inferior in every way. The wires melted through and nearly started a fire. Also, after about 15 minutes use, the power light burned out. Very poorly constructed product with dangerously under sized wire.

When our 24v peg perego RZR 800 burnt out its relay board this is what I purchased to replace it. This kit comes with a Weelye RX74 controller and all wires/switches. Has a nice “soft-start” feature to save the plastic tires. I bench-tested everything first with the kit switches, then rewired the system into the vehicle to use the factory pedal/switches. I see folks complaining about wire gauge, but found the motor gauges thicker than the factory motor wires. It is important to note big amperage travels only on the battery and motor wires, whereas the other small wires are “command” wires that open/close the relays. Advise you have knowledge and experience with DC circuits if purchasing!

I was a little skeptical of this at first because my car is a smart drive, but everything on the smart drive still worked other than battery life on the display. All in all was easy to install the remote works. Great product and would recommend to anyone

Using on a diy golf trolley! I’m using power wheels motors and steering motor. Thus far it’s working great. My concern is battery life in remote. Had to override gas pedal, but alls working as expected.

Item is fantastic. HELP Control board makes clicking sound and will not work at all. Can someone contact me.