5952 VHB Tape: 2.5cm . x 15 ft. (Black)

Great stuff. This double sided closed cell foam tape with Very High Bond (VHB) strength adhesive will stick to almost anything, forever.

Used this along with wider tape to attach my truck bed rail caps. Worked great! Make sure you use real 3M tape. Completely cures in 72hrs. My rails are not going anywhere! This tape really sticks. Warning, don't press down hard until you place your item or you won’t be able to reposition

It has been over five years now since I have used this product. I had trim peeling off of a 2002 vehicle and I used this product to reattach it. I cleaned the surfaces well. The adhesive is very sticky, so make sure you get it on straight to start with. I do not think you would be able to peel and reapply with out damaging the product. I temporarily added a wood strip to the area to guide the application. Vehicle is parked out in the sun/weather year round. Still solid.

I bought this adhesive tape to use for cable management with my at-home desk. To start, I have 4 monitors resulting in tons of wires. This adhesive was used to stick cable railways (for hide the cables) and 2 12-outlet extension cords to my standing desk. So far, it shows no signs of weakening and seems to be very strong. As for removing the tape, I had to re-adjust one of the extension cords and it was very hard to remove. It will probably remove paint when removing if you apply it to a wall or something alike. As for applying the tape, removing the red side which covers the "adhesive" side was pretty difficult but can be done. To make it easier, I used a knife to lift one corner and a pair of tweezers to remove the rest. Otherwise, the adhesive is very strong and would definitely use again for cable management.

Researched many websites about double-sided tape. Came up on this on YouTube. I can tell you that whatever you use this tape on, be prepared for it to stick to that surface. I used it for the Corvette's wing. Heat the area first, apply the tape carefully, peel off the plastic, and press it down. It will not move once it grabs hold. Also, leave your part out in the sun so the glue can fully bond to the surface. I recommend a heat gun on low setting, that stuff works.

Originally I bought this to stick a pocket amplifier onto the foam insulation underneath the dash in my car. As you might expect, it didn't work (foam in general, it appears is a lousy surface to attach anything to). However, neither did Velcro, so I won't take a star off for that. Later I did use it to attach a plastic subwoofer control to the plastic/vinyl dash trim in my truck. It hasn't moved since. So clearly, in the right situation it work wonderful. The price, while not cheap, is reasonable for what it is. It's easy to cut, apply, and use. In the right situation, I'd use it again. The only advice I'd give to anyone considering buying it, is consider potential application you are purchasing for and whether or not it will work. That and do you really need 15 feet of this stuff? I still pretty much have a whole roll left over. lol.

VHB tape. Perfect for needing to hang something permanently, until you need it removed. I have used it on dash cams and security systems, plastic to glass, metal or wood . Highly recommend

I picked this up because the tape included with the phone mount in my car failed when it started warming up earlier this year. I'm fairly sure it was the same tape, but because of the shape of the phone mount base I didn't get a solid adhesion when I originally mounted it. This is the reason I went with 4 stars for ease of use, since you have to ensure that the tape gets good pressure across the entire mounting surface to ensure it properly adheres, which can be difficult in some situations. In my case, I had to remove the trim panel in my car and use clamps due to the texture of the panel and slight curve on the mount. However after taking that extra step, it is definitely holding as strong as this tape is supposed to. It has been mounted for a couple of weeks now, and the temperatures are starting to dip down below freezing. This tape is supposed to hold solid down to -40 degrees, something we rarely see around these parts, but if I have any issues I will update this. Likewise, when next summer comes around and we start seeing temps into the 100s/40s I will update if it starts to release then as well.

Heel geschikt voor het betere dubbelzijdige plakwerk

ممتاز

as advertised

Bra allt i allo tejp om det ska hålla.

Excellent