Pro'sKit 1PK-9402 Hex Nut Driver Set, Yellow

I work on electronics that mostly have tiny metric nuts, so a set like this is essential. It is well made and for nuts that it can't reach I have a smaller set with tiny metric sockets. Some of the metric sizes will work on old electronics with imperial size nuts and bolts. Half the time the 1/4" and 5/16" don't even work with the imperial size sockets or wrenches, so this metric set can often be used for imperial size stuff. Ya never know until you try.

Awesome little kit, got for my axial RC car. Works as needed

A little heavy on the weight seems unbalanced but price is great compared to other options

If you deal with foreign electronics, you are going to need a set of small metric nut drivers. Sockets aren't going to cut it. This is a nice set that covers all the sizes below what you would normally see in a 1/4"-drive socket set. The handles are a good size with a good grip. The only addition I made was to put some white heat-shrink tubing on the grips so I could write the metric size for quick identity.

Solid, shiny metal. Fit perfect, great for driving pcv standoff nuts.

Since I started a geek type project and ended up using (what are now really cheap IOT parts, I needed tools that would assemble the small stuff.This set is totally worthless for anything larger than 4-40, but indispensable for really small stuff.

This is a must for anyone wanting to put a new rotor and distributor cap on an LT1 GM engine.The bolts are counter sunk in the distributor cap and are about 3.5mm. This set starts with a 4mm and goes up. The 4mm worked just fine and allowed easy removal of the distributor cap.

I order3ed these specifically for the 6mm unfortunately had to return it as the drivers wall were too thick for the task. Otherwise they were decent quality.