What settings deliver 4-khz carrier frequency, beat frequency of 80–160 hz and intensity of less than 33 ma? i don't know how to set this up.

The 4mhz carrier frequency is locked in at any settings. When dealing with inflammation I point the ratings knob at the first digit of 150, this gives about 100 hz beat frequency. Sometimes when a muscle is tight, but inflammation is not a problem, I will set the frequency at a much lower setting to pulse the muscle.. Personally I tend to set the amplitude knob to maximum, because I have a high pain tolerance. Most people should start the amplitude setting at a level high enough to feel it working, but low enough to be comfortable. After a couple minutes you can increase the setting. The amplitude varies greatly depending upon if it is plugged in, or just running off the 9 volt battery. I always use mine plugged in.

Hi i need to buy an adaptor to convert the plug that comes with this device to a 3-pin plug for ireland. what search term do i use?!

European plug converter or similar.

Do you sell one with a higher fequency? Higher than 150hz.

The reason for a higher frequency is to get more depth. However, unlike a TENS unit and interferential uses a 4000 hertz carrier frequency, as well as a variable higher rate to get a beet frequency. It is the 4000 hertz carrier that allows the interferential unit to treat much deeper than any TENS unit. I set the beet frequency at 100 to reduce inflammation, and at lower rates to either warm up or rehab a muscle.

Fabrication IF-4000 Interferential Therapy Unit

الوصف

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة