Silverline 262212-350W 250mm (10") DIY Bench Drill Press 230V

arriver sans casse il ne manquer rien . marche trés bien . bon pour des petit bricoleur bonne couleur tres fastifesans

Item came damaged, and I was not able to use it. Check for damage on the motor and free spin of the spindle before starting.

Taladro de columna robusto y de momento bastante fiable y bueno. De momento hice pocas pruebas y los taladros son bastante verticales, puse la velocidad al minimo para taladrar acero y aluminio de manera vertical y sin problema. Solo el detalle que no puedes trabajarlo mas de 15minutos de forma continuada , tienes que dejarlo descansar 10, pero no es un engaño se sabe que los motores no tienen un ciclo de trabajo indefinido. Muy contento y la verdad que por el precio un 100% recomendable

In riferimento al prezzo, è un uno strumento molto comodo per lavori occasionali.

This is a compact useful small bench drill, with five speeds (by changing the belt over the pulleys). I would note that the milled finish on the table and base are unusually course, a finishing cut on a miller wouldn’t go a miss. The “T” slots on the bed and table hadn’t been finished properly, I had to do that with a round and flat file, also there were a lot of burrs everywhere, they needed tidying up with a file. Once built up and fixed to the bench, the mains lead will plug into a 13A socket, although the plug is an adaptor, which if removed, reveals an European plug on the lead. Our mains supply is 240V 50Hz, the drill works well with that. I can’t comment on duty cycle, I note that it is not for industrial use, so I would assume it is rated for intermittent use only, which is all I shall be using it for. I would not recommend this for precision engineering, because the way the main drilling head fits onto the pole is a bit sloppy, so repeatability when using a jig fixed to the table, will be poor, also I would check all the geometry while setting up if I had to use it for this, for example, for making a part for a model steam engine. For general work like making a replacement part for a “Pop-up” Gazebo, as in the video, it is more than adequate. It was a good price, and delivered on time. I am pleased with it.