Kraftex Copper Tape [2 Inch x 33ft]. Conductive Adhesive use as Copper Tape for Slugs, Copper Shielding Tape for Guitars, Faraday Tape or Copper Flashing roll.

Worked great on my guitar looks good, the thickness is perfect for fitting in the guitar, and it’s durable and pretty sticky,

I was kind of upset when I first got this product. For some odd reason I thought it was 1 1/2" or 2" wide and knew it was a good length but made the mistake of judging by the picture instead of reading the description so it was my fault. However, the main image is misconceiving and either angled, zoomed and cropped just right or that of an actual larger roll. I feel that amazon should require the dimensions or some sort of scale in the main pictures of smaller items that come in various sizes, this would apply to a lot of items but eliminate mistakes. I've made this mistake with other items before this so shame on me. It's a good product and gets 5 stars. •the thickness is just right in terms of strength and ability to apply it to various objects. The pic of the shielding on the guitar is a good example. •the number of uses for this product is why I bought it and besides inspecting it have used it yet, but it's there when I need it. •quick shipping and good packaging, which is important since foil tapes can be a real pain if the roll gets mangled. •Concerning those using this for slugs, mainly the ones who posted pictures saying it doesn't work. There doesn't seem to be any scientific proof on how this repels those creepy crawlers, but my guess would be that they are unable to stick to it properly. I say that from having fished on Lake Ontario where an invasive, foreign "sea flea" has invaded the waters. Using standard plastic line, it's amazing how strong these things that seems like seaweed can stick to your line. To combat them, fisherman use copper fishing line which they have a much harder time sticking to, if at all. So if you're going to wrap a tree, don't do it like the one guy who posted a picture. Having multiple wraps on a textured surface shows to be ineffective since the can probably just get by with help from the edges of tape that overlap that much and the tree texture may help also. A better approach would be wrapping the tree with something else first that will span the ridges and offer a smooth surface to apply the copper tape to. A wide roll of electrical tape stretched tightly around the tree a few times should work As for the picture of a snail on a windowsill, well, I think gravity beats your setup. I think it would work better on a vertical surface. Also, since I'm only guessing at this and possibly just wrong. Another theory that the tape messes with their senses due to the conductivity of copper, also exists. It doesn't look like these two different setups are grounded. It would be interesting to see if the results change once these setups are grounded. Just use the tape to attach a small wire onto the surface of the barrier, then run the wire to the ground plus an extra few inches and strip off any coating or jacket on the wire , take about six inches of tap and fold it back onto itself with the wire sandwiched in between the two layers which should leave you with a three inch strip of tape attached to the wire sitting in the ground. Dig a small hole to fit the conductor plate you just made, inside of it and fill it back in. That will put a small amount of voltage into your shield and that may be the trick. Hope you don't mind my suggestions for improvement and would love to know if either method made a difference. I'd try grounding it first since that require the least amount of modification. Good luck.

Arrived as anticipated and performs as expected.

I have used this to improve the RFID blocking in my wallet and other cases where bad actors can get to my sensitive info and credit cards. I don't trust all the advertising about such products made in Adia as I have found problems with manufacturing of most other products from there these days. I double the tape over on itself - sticky side against sticky side, cut to size and then cover with clear packing tape. I've found that the packing tape helps the thing last much much longer. Be warned, this tape is very thin and tears very very easily, so you need a steady hand for what I describe above. I would not recommend for other uses without layering over a few times.

I used this to shield the control cavity and pickup routes of a guitar I was rewiring. I noticed it is quite a bit thinner than the stuff I'm used to getting, and initially I thought "well they did state the thickness, my bad, guess this stuff is just lightweight for drones/RC stuff" but I used it anyway, and boy am I glad I did. Due to the thinness, it was WAY easier to mold to the contours and get it to lay flat than the old stuff I had (which was quite a bit thicker.) The adhesive is very good and had no problem sticking to paint and also bare wood, and I tested for continuity across the first piece to the last, with no solder bridges, and it was a complete circuit. I had no issues with tearing or damage related to it being thinner, either. It was just easier to work with - and I suppose if you are shielding a drone or RC vehicle the light weight would be appreciated. In short, it does everything copper shielding tape should. The thickness should have no bearing on the effect of blocking noise and my results were impressive - the guitar is now super quiet, even on a high-gain setting and when not touching the strings/bridge to ground them.

Well priced tape that is high quality and thickness. Made my guitar completely silent. Zero issues in installation or adhesion.

Great tape. Sticks well (we used it on wood) and easy to work with. It’s very pretty and what we used it for was placed outside and it has held up well for the last 2 winters and summers. For people with plants that have slug problems, I wonder if it could help keep slugs away from plants if put around the rim of the pot,since slugs (it is said) “will not cross a copper line”.

Keeps the slugs from eating my garden! You can also use hazelnut shells to keep them out but I’m severely allergic to hazelnut. Went looking for another option and this has worked great!! (I know my tomato cage is upside down I have been lazy about pushing it into the ground)